Date: Fri, 11 Jun 2010 16:41:32 +0200 From: "Johan Hendriks" <Johan@double-l.nl> To: <freebsd-stable@freebsd.org> Subject: FW: 8.1 AMD64 Beta1 cd panics on Proliant ML110 G6 Message-ID: <57200BF94E69E54880C9BB1AF714BBCB0111C3@w2003s01.double-l.local> References: <57200BF94E69E54880C9BB1AF714BBCBA57A86@w2003s01.double-l.local> <4C120144.80002@icyb.net.ua> <57200BF94E69E54880C9BB1AF714BBCBA57A90@w2003s01.double-l.local> <20100611134555.GA9682@icarus.home.lan> <57200BF94E69E54880C9BB1AF714BBCB0111C2@w2003s01.double-l.local>
next in thread | previous in thread | raw e-mail | index | archive | help
>> >> Hello all.
>> >>=20
>> >> I try to install the Beta of 8.1 but it panics on my server HP
>> Proliant ML110
>>=20
>>>Stacktrace would be helpful.
>>=20
>> Well at startup, the keyboard is not working, i can not select any =
boot
>> mode, and after the timer is at 0 ti boots, and then ends with this
>> panic, and totally hangs.
>> 8.0 works fine also CURRENT Works!
>Regarding the keyboard not working -- it should still be working during
>the loader phase (FreeBSD logo, press 4 for single user, etc.), =
correct?
>If so, two things to try. Escape to the loader prompt and try one of
>the below (if (a) doesn't work, try (b)):
>a) set hint.kbdmux.0.disabled=3D1
> boot
>b) set hint.atkbd.0.disabled=3D1
> set hint.atkbdc.0.disabled=3D1
> boot
>Hopefully one of these will allow your keyboard to continue functioning
>once the system panics, so that you can provide a backtrace. Thanks.
>
Little update, also 9-CURRENT build today is not able to use the =
keyboard at startup, but it boots normal, and after the boot the system =
works normal.
I did do pciconf and dmesg on the machine from 9-CURRENT.
DMESG
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #0: Fri Jun 11 14:34:42 CEST 2010
root@hast-master.double-l.local:/usr/obj/usr/src/sys/KRNL amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) CPU G6950 @ 2.80GHz (3189.54-MHz =
K8-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x20652 Family =3D 6 Model =3D 25 =
Stepping =3D 2
=
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
=
Features2=3D0x80e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,P=
DCM,POPCNT>
AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=3D0x1<LAHF>
TSC: P-state invariant
real memory =3D 2147483648 (2048 MB)
avail memory =3D 2047291392 (1952 MB)
ACPI APIC Table: <HP ProLiant>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <HP ProLiant> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xdfd01800-0xdfd01bff =
irq 16 at device 26.0 on pci0
ehci0: [ITHREAD]
usbus0: EHCI version 1.0
usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci16: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci26: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci28: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem =
0xde000000-0xdeffffff,0xdf800000-0xdf803fff,0xdf000000-0xdf7fffff irq 18 =
at device 0.0 on pci28
pcib5: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci30: <ACPI PCI bus> on pcib5
bge0: <HP NC107i PCIe Gigabit Server Adapter, ASIC rev. 0x5784100> mem =
0xdf900000-0xdf90ffff irq 19 at device 0.0 on pci30
miibus0: <MII bus> on bge0
brgphy0: <BCM5784 10/100/1000baseTX PHY> PHY 1 on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, =
1000baseT-FDX, auto
bge0: Ethernet address: 78:e7:d1:bd:ad:0e
bge0: [FILTER]
pcib6: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci32: <ACPI PCI bus> on pcib6
ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xdfd01c00-0xdfd01fff =
irq 23 at device 29.0 on pci0
ehci1: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci48: <ACPI PCI bus> on pcib7
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem =
0xdfa00000-0xdfa0007f irq 17 at device 0.0 on pci48
miibus1: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:75:fb:e2:37
xl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PCH SATA300 controller> port =
0x1830-0x1837,0x1824-0x1827,0x1828-0x182f,0x1820-0x1823,0x1810-0x181f,0x1=
800-0x180f irq 18 at device 31.2 on pci0
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel PCH SATA300 controller> port =
0x1888-0x188f,0x183c-0x183f,0x1880-0x1887,0x1838-0x183b,0x1870-0x187f,0x1=
860-0x186f irq 17 at device 31.5 on pci0
atapci1: [ITHREAD]
ata4: <ATA channel 0> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci1
ata5: [ITHREAD]
acpi_button0: <Power Button> on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq =
0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
orm0: <ISA Option ROMs> at iomem =
0xc0000-0xc7fff,0xca000-0xcafff,0xcb000-0xcb7ff,0xdf000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ad4: 152627MB <GB0160CAABV HPG1> at ata2-master UDMA100 SATA 1.5Gb/s
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
GEOM: ad4s1: geometry does not match label (255h,63s !=3D 16h,63s).
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> =
on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> =
on usbus1
acd0: DVDROM <hp DVDROM DH20N/EB00> at ata4-master UDMA100 SATA 1.5Gb/s
SMP: AP CPU #1 Launched!
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 8 ports with 8 removable, self powered
ugen0.3: <LiteON> at usbus0
ukbd0: <LiteON HP Basic USB Keyboard, class 0/0, rev 1.10/1.00, addr 3> =
on usbus0
kbd0 at ukbd0
Root mount waiting for: usbus1 usbus0
ugen1.3: <ServerEngines> at usbus1
ukbd1: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> =
on usbus1
kbd2 at ukbd1
ums0: <ServerEngines SE USB Device, class 0/0, rev 1.10/0.01, addr 3> on =
usbus1
ums0: 8 buttons and [XYZ] coordinates ID=3D0
ugen0.4: <vendor 0x062a> at usbus0
ums1: <vendor 0x062a product 0x0001, class 0/0, rev 1.10/0.00, addr 4> =
on usbus0
ums1: 3 buttons and [XYZ] coordinates ID=3D0
Trying to mount root from ufs:/dev/label/rootfs
PCICONF -lv
hostb0@pci0:0:0:0: class=3D0x060000 card=3D0x3318103c chip=3D0x00488086 =
rev=3D0x12 hdr=3D0x00
vendor =3D 'Intel Corporation'
class =3D bridge
subclass =3D HOST-PCI
pcib1@pci0:0:1:0: class=3D0x060400 card=3D0x00428086 chip=3D0x00498086 =
rev=3D0x12 hdr=3D0x01
vendor =3D 'Intel Corporation'
class =3D bridge
subclass =3D PCI-PCI
ehci0@pci0:0:26:0: class=3D0x0c0320 card=3D0x3118103c chip=3D0x3b3c8086 =
rev=3D0x05 hdr=3D0x00
vendor =3D 'Intel Corporation'
class =3D serial bus
subclass =3D USB
pcib2@pci0:0:28:0: class=3D0x060400 card=3D0x3318103c chip=3D0x3b428086 =
rev=3D0x05 hdr=3D0x01
vendor =3D 'Intel Corporation'
class =3D bridge
subclass =3D PCI-PCI
pcib3@pci0:0:28:1: class=3D0x060400 card=3D0x3318103c chip=3D0x3b448086 =
rev=3D0x05 hdr=3D0x01
vendor =3D 'Intel Corporation'
class =3D bridge
subclass =3D PCI-PCI
pcib4@pci0:0:28:2: class=3D0x060400 card=3D0x3318103c chip=3D0x3b468086 =
rev=3D0x05 hdr=3D0x01
vendor =3D 'Intel Corporation'
class =3D bridge
subclass =3D PCI-PCI
pcib5@pci0:0:28:3: class=3D0x060400 card=3D0x3318103c chip=3D0x3b488086 =
rev=3D0x05 hdr=3D0x01
vendor =3D 'Intel Corporation'
class =3D bridge
subclass =3D PCI-PCI
pcib6@pci0:0:28:4: class=3D0x060400 card=3D0x3318103c chip=3D0x3b4a8086 =
rev=3D0x05 hdr=3D0x01
vendor =3D 'Intel Corporation'
class =3D bridge
subclass =3D PCI-PCI
ehci1@pci0:0:29:0: class=3D0x0c0320 card=3D0x3118103c chip=3D0x3b348086 =
rev=3D0x05 hdr=3D0x00
vendor =3D 'Intel Corporation'
class =3D serial bus
subclass =3D USB
pcib7@pci0:0:30:0: class=3D0x060401 card=3D0x3318103c chip=3D0x244e8086 =
rev=3D0xa5 hdr=3D0x01
vendor =3D 'Intel Corporation'
device =3D '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub =
Interface to PCI Bridge'
class =3D bridge
subclass =3D PCI-PCI
isab0@pci0:0:31:0: class=3D0x060100 card=3D0x3118103c chip=3D0x3b148086 =
rev=3D0x05 hdr=3D0x00
vendor =3D 'Intel Corporation'
class =3D bridge
subclass =3D PCI-ISA
atapci0@pci0:0:31:2: class=3D0x01018f card=3D0x3118103c =
chip=3D0x3b208086 rev=3D0x05 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D 'IBEX SATA Controller'
class =3D mass storage
subclass =3D ATA
none0@pci0:0:31:3: class=3D0x0c0500 card=3D0x3318103c chip=3D0x3b308086 =
rev=3D0x05 hdr=3D0x00
vendor =3D 'Intel Corporation'
class =3D serial bus
subclass =3D SMBus
atapci1@pci0:0:31:5: class=3D0x010185 card=3D0x3118103c =
chip=3D0x3b268086 rev=3D0x05 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D 'IBEX SATA Controller'
class =3D mass storage
subclass =3D ATA
vgapci0@pci0:28:0:0: class=3D0x030000 card=3D0x31fa103c =
chip=3D0x0522102b rev=3D0x02 hdr=3D0x00
vendor =3D 'Matrox Electronic Systems Ltd.'
device =3D 'Matrox G200e (ServerEngines) - English (G200e)'
class =3D display
subclass =3D VGA
bge0@pci0:30:0:0: class=3D0x020000 card=3D0x705d103c chip=3D0x165b14e4 =
rev=3D0x10 hdr=3D0x00
vendor =3D 'Broadcom Corporation'
class =3D network
subclass =3D ethernet
xl0@pci0:48:0:0: class=3D0x020000 card=3D0x100010b7 chip=3D0x920010b7 =
rev=3D0x78 hdr=3D0x00
vendor =3D '3COM Corp, Networking Division'
device =3D 'Fast EtherLink for PC Management NIC (3C905 CX-TXM)'
class =3D network
subclass =3D ethernet
regards,
Johan Hendriks
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?57200BF94E69E54880C9BB1AF714BBCB0111C3>