Date: Fri, 10 Oct 2025 18:37:22 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: ziaee@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #26948 - Still Failing Message-ID: <2131742662.861.1760121443061@jenkins.ci.freebsd.org> In-Reply-To: <1018660053.827.1760099956153@jenkins.ci.freebsd.org> References: <1018660053.827.1760099956153@jenkins.ci.freebsd.org>
index | next in thread | previous in thread | raw e-mail
FreeBSD-main-amd64-test - Build #26948 (de36d0dbaeaf05e9bf949fdf22b560c34b2c0d74) - Still Failing Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26948/ Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26948/changes Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/26948/console Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) d8a4843cb76ec1b7da8d5defafb7eef9a6cc1c21 by ziaee: umass.4: Modernize driver loading instructions de36d0dbaeaf05e9bf949fdf22b560c34b2c0d74 by ziaee: cli.lua.8: Reflow literal comments The end of the build log: [...truncated 10.92 KiB...] FreeBSD 16.0-CURRENT #0 n281028-de36d0dbaeaf: Thu Oct 9 23:02:55 UTC 2025 root@FreeBSD-main-amd64-build.jail.ci.FreeBSD.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64 FreeBSD clang version 19.1.7 (https://github.com/llvm/llvm-project.git llvmorg-19.1.7-0-gcd708029e0b2) WARNING: WITNESS option enabled, expect reduced performance. SRAT: Ignoring memory at addr 0xff000000 VT: init without driver. CPU: Intel(R) Xeon(R) CPU E5-2695 v2 @ 2.40GHz (2400.39-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306e4 Family=0x6 Model=0x3e Stepping=4 Features=0x9f83fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE,SSE2,SS,HTT,PBE> Features2=0xfe9e6217<SSE3,PCLMULQDQ,DTES64,DS_CPL,SSSE3,CX16,xTPR,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND,HV> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> TSC: P-state invariant Hypervisor: Origin = "bhyve bhyve " real memory = 9663676416 (9216 MB) avail memory = 8295165952 (7910 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <BHYVE BVAPIC > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 2 package(s) x 1 core(s) random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" random: unblocking device. Security policy loaded: TrustedBSD MAC/BSD Extended (mac_bsdextended) ioapic0 <Version 1.1> irqs 0-31 Launching APs: 1 random: entropy device external interface kbd1 at kbdmux0 smbios0: <System Management BIOS> at iomem 0xf1000-0xf101e smbios0: Entry point: v2.1 (32-bit), Version: 2.6, BCD Revision: 2.6 aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS> acpi0: <BHYVE BVXSDT > acpi0: Power Button (fixed) atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 16777216 Hz quality 950 Event timer "HPET" frequency 16777216 Hz quality 550 Event timer "HPET1" frequency 16777216 Hz quality 450 Event timer "HPET2" frequency 16777216 Hz quality 450 Event timer "HPET3" frequency 16777216 Hz quality 450 Event timer "HPET4" frequency 16777216 Hz quality 450 Event timer "HPET5" frequency 16777216 Hz quality 450 Event timer "HPET6" frequency 16777216 Hz quality 450 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 isab0: <PCI-ISA bridge> at device 1.0 on pci0 isa0: <ISA bus> on isab0 virtio_pci0: <VirtIO PCI (legacy) Block adapter> port 0x2000-0x207f mem 0xc0000000-0xc0001fff irq 16 at device 2.0 on pci0 vtblk0: <VirtIO Block Adapter> on virtio_pci0 vtblk0: 9216MB (18874557 512 byte sectors) virtio_pci1: <VirtIO PCI (legacy) Block adapter> port 0x2080-0x20ff mem 0xc0002000-0xc0003fff irq 17 at device 3.0 on pci0 vtblk1: <VirtIO Block Adapter> on virtio_pci1 vtblk1: 512MB (1048576 512 byte sectors) ahci0: <Intel ICH8 AHCI SATA controller> mem 0xc0004000-0xc0005fff irq 18 at device 4.0 on pci0 ahci0: AHCI v1.30 with 32 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 virtio_pci2: <VirtIO PCI (legacy) Block adapter> port 0x2100-0x217f mem 0xc0006000-0xc0007fff irq 19 at device 5.0 on pci0 vtblk2: <VirtIO Block Adapter> on virtio_pci2 vtblk2: 128MB (262144 512 byte sectors) virtio_pci3: <VirtIO PCI (legacy) Block adapter> port 0x2180-0x21ff mem 0xc0008000-0xc0009fff irq 20 at device 6.0 on pci0 vtblk3: <VirtIO Block Adapter> on virtio_pci3 vtblk3: 128MB (262144 512 byte sectors) virtio_pci4: <VirtIO PCI (legacy) Block adapter> port 0x2200-0x227f mem 0xc000a000-0xc000bfff irq 21 at device 7.0 on pci0 vtblk4: <VirtIO Block Adapter> on virtio_pci4 vtblk4: 128MB (262144 512 byte sectors) virtio_pci5: <VirtIO PCI (legacy) Block adapter> port 0x2280-0x22ff mem 0xc000c000-0xc000dfff irq 22 at device 8.0 on pci0 vtblk5: <VirtIO Block Adapter> on virtio_pci5 vtblk5: 128MB (262144 512 byte sectors) virtio_pci6: <VirtIO PCI (legacy) Block adapter> port 0x2300-0x237f mem 0xc000e000-0xc000ffff irq 23 at device 9.0 on pci0 vtblk6: <VirtIO Block Adapter> on virtio_pci6 vtblk6: 128MB (262144 512 byte sectors) vmgenc0: <VM Generation Counter> on acpi0 random: registering fast source VM Generation ID atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] driver bug: Unable to set devclass (class: atkbdc devname: (unknown)) Unhandled ps2 mouse command 0xe1 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] WARNING: Device "psm" is Giant locked and may be deleted before FreeBSD 15.0. psm0: model Generic PS/2 mouse, device ID 0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 uart2: <16550 or compatible> port 0x3e8-0x3ef irq 4 on acpi0 uart3: <16550 or compatible> port 0x2e8-0x2ef irq 3 on acpi0 vga0: <Generic ISA VGA> at port 0x3b0-0x3bb iomem 0xb0000-0xb7fff pnpid PNP0900 on isa0 Timecounter "TSC-low" frequency 1200049980 Hz quality 1000 Timecounters tick every 10.000 msec usb_needs_explore_all: no devclass Trying to mount root from ufs:/dev/gpt/rootfs [rw]... WARNING: WITNESS option enabled, expect reduced performance. ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <BHYVE SATA DISK 001> ACS-2 ATA SATA 3.x device ada0: Serial Number BHYVE-AC61-4EA8-6E92 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 128MB (262144 512 byte sectors) Setting hostuuid: 0827a9a3-30ea-46c4-98c6-d8b9653e922c. Setting hostid: 0xf576e6d9. Starting file system checks: /dev/gpt/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/gpt/rootfs: clean, 1080254 free (6 frags, 135031 blocks, 0.0% fragmentation) Mounting local filesystems:. Loading kernel modules: accf_data accf_dns accf_http accf_tls blake2 carp cfiscsi cryptodev dummymbuf dummynet fusefs if_bridge if_enc if_epair if_ovpn if_stf ipdivert ipfw ipfw_nat ipl ipsec mac_bsdextended mac_ipacl mac_portacl mqueuefs pf pflog pflow pfsync sctp snd_dummy tarfs tcpmd5 blaketwo0: <Blake2> load_dn_sched dn_sched FIFO loaded load_dn_sched dn_sched QFQ loaded load_dn_sched dn_sched RR loaded load_dn_sched dn_sched WF2Q+ loaded load_dn_sched dn_sched PRIO loaded load_dn_sched dn_sched FQ_CODEL loaded load_dn_sched dn_sched FQ_PIE loaded load_dn_aqm dn_aqm CODEL loaded load_dn_aqm dn_aqm PIE loaded ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to accept, logging disabled IP Filter: v5.1.2 initialized. Default = pass all, Logging = enabled Security policy loaded: TrustedBSD MAC/ipacl (mac_ipacl) Security policy loaded: TrustedBSD MAC/portacl (mac_portacl) pcm0: <Dummy Audio Device> /etc/rc: WARNING: $hostname is not set -- see rc.conf(5). Setting up harvesting: PURE_VMGENID,PURE_RDRAND,RANDOMDEV,[CALLOUT],[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/perl5/5.42/mach/CORE 32-bit compatibility ldconfig path: /usr/lib32 lo0: link state changed to UP Starting Network: lo0 enc0. lo0: flags=1008049<UP,LOOPBACK,RUNNING,MULTICAST,LOWER_UP> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> enc0: flags=0 metric 0 mtu 1536 options=0 groups: enc nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> Starting devd. Starting Network: enc0. enc0: flags=0 metric 0 mtu 1536 options=0 groups: enc nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> route: message indicates error: File exists add host 127.0.0.1: gateway lo0 fib 1,2 add host 127.0.0.1: gateway lo0 fib 0: route already in table route: message indicates error: File exists add host ::1: gateway lo0 fib 1,2 add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 fib 0,1,2 add net ff02::: gateway ::1 fib 0,1,2 add net ::ffff:0.0.0.0: gateway ::1 fib 0,1,2 add net ::0.0.0.0: gateway ::1 fib 0,1,2 Updating motd:. Updating /var/run/os-release done. Clearing /tmp (X related). Starting auditd. 2025-10-10T12:40:19.550523+00:00 - auditd 1434 - - starting... 2025-10-10T12:40:19.552102+00:00 - auditd 1435 - - Auditing disabled 2025-10-10T12:40:19.553218+00:00 - auditd 1435 - - Configured trail files distribution. 2025-10-10T12:40:19.555036+00:00 - auditd 1435 - - Auditing enabled 2025-10-10T12:40:19.556010+00:00 - auditd 1435 - - New audit file is /var/audit/20251010124019.not_terminated 2025-10-10T12:40:19.560918+00:00 - auditd 1435 - - Registered 677 event to class mappings. 2025-10-10T12:40:19.561464+00:00 - auditd 1435 - - Registered non-attributable event mask. 2025-10-10T12:40:19.562413+00:00 - auditd 1435 - - Set audit policy in kernel. 2025-10-10T12:40:19.564080+00:00 - auditd 1435 - - Set audit trail size in kernel. 2025-10-10T12:40:19.565005+00:00 - auditd 1435 - - Set audit trail queue in kernel. 2025-10-10T12:40:19.565934+00:00 - auditd 1435 - - Set audit trail min free percent in kernel. 2025-10-10T12:40:19.566863+00:00 - auditd 1435 - - audit_control(5) may be missing 'host:' field 2025-10-10T12:40:19.568468+00:00 - auditd 1435 - - Audit controls init successful No core dumps found. Mounting late filesystems:. Fri Oct 10 12:40:19 UTC 2025 FreeBSD/amd64 (Amnesiac) (ttyu0) login: Trigger sent. Waiting for PIDS: 14352025-10-10T18:37:14.169848+00:00 - auditd 1435 - - Got close and die trigger 2025-10-10T18:37:14.170896+00:00 - auditd 1435 - - Auditing disabled 2025-10-10T18:37:14.172285+00:00 - auditd 1435 - - renamed /var/audit/20251010124019.not_terminated to /var/audit/20251010124019.20251010183714 2025-10-10T18:37:14.175535+00:00 - auditd 1435 - - Finished 2025-10-10T18:37:14.175812+00:00 - auditd 1435 - - auditd exiting. . Stopping devd. Waiting for PIDS: 1133. Writing entropy file: . Writing early boot entropy file: . . Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 0 0 done All buffers synced. Uptime: 5h57m2s acpi0: Powering system off + rc=0 + echo 'bhyve return code = 0' bhyve return code = 0 + sudo /usr/sbin/bhyvectl '--vm=testvm-main-amd64-26948' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=meta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./disable-notyet-tests.sh x ./auto-shutdown x ./run.sh x ./run-kyua.sh x ./disable-dtrace-tests.sh x ./disable-zfs-tests.sh + rm -f 'test-report.*' + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or directory + report=test-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report.xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins12575969324891942791.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'de36d0dbaeaf05e9bf949fdf22b560c34b2c0d74', 'branch': 'main', 'target': 'amd64', 'target_arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../de36d0dbaeaf05e9bf949fdf22b560c34b2c0d74/amd64/amd64\n" Recording test results ERROR: Step ‘Publish JUnit test result report’ failed: No test report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail addresshelp
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2131742662.861.1760121443061>