Date: Wed, 25 Oct 2000 00:18:07 -0700 (PDT) From: "Joseph W. Stein" <joes@shasta.joescanner.com> To: jkh@freebsd.org, sos@freebsd.org, stable@freebsd.org Subject: ATA problems (rehashed) Message-ID: <200010250718.e9P7I7405091@shasta.joescanner.com>
next in thread | raw e-mail | index | archive | help
I now have my system back up and somewhat operational. Ever since I upgraded my machine from an AMD 4x86-120 to this AMD Athlon-600, I have had problems booting. This gets to be a bit tedious. I apologize for my last message to all of you about this problem, with none of this info included, but at that point, I couldn't even get the machine to boot. Please let me know if there is any other information I should give you. I would really like this problem to either be resolved, or a hack to make the ATA driver drop directly into PIO4 mode. (I have gone into the system BIOS and selected 'Load Fail-Safe' settings; I still get about a 80% boot-failure rate.) If you would like to see the kernel configuration file, please see https://www.joescanner.com/SHASTA.txt The specs on the "new" machine are: AI64 Athlon(r) motherboard Antec Athlon-Certified case w/300w Power supply The AI64 has an AMD ATA controller onboard 2xD-Link PCI 10/100 Network Cards 1xKaser Trio-4 LC2X 4Mb Video Card (AGP) 2xonboard serial ports 1xonboard parallel ports 2xonboard USB ports PS/2 Keyboard port PS/2 Mouse port Here is my `uname -a`: FreeBSD shasta.joescanner.com 4.1.1-STABLE FreeBSD 4.1.1-STABLE #0: Tue Oct 24 23:30:27 PDT 2000 root@shasta.joescanner.com:/usr/obj/usr/src/sys/SHASTA i386 and, the output of a `boot -v`: Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.1.1-STABLE #0: Tue Oct 24 23:30:27 PDT 2000 root@shasta.joescanner.com:/usr/obj/usr/src/sys/SHASTA Calibrating clock(s) ... TSC clock: 598792731 Hz, i8254 clock: 1193094 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: AMD-K7(tm) Processor (598.84-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x612 Stepping = 2 Features=0x81f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,MMX> AMD Features=0xc0400000<AMIE,DSP,3DNow!> Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative real memory = 134152192 (131008K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x002a5000 - 0x07fe7fff, 131346432 bytes (32067 pages) avail memory = 127901696 (124904K bytes) bios32: Found BIOS32 Service Directory header at 0xc00fb180 bios32: Entry = 0xfb5f0 (c00fb5f0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb620 pnpbios: Found PnP BIOS data at 0xc00fbfb0 pnpbios: Entry = f0000:bfe0 Rev = 1.0 Other BIOS signatures found: ACPI: 000f5fc0 Preloaded elf kernel "kernel" at 0xc028c000. Pentium Pro MTRR support enabled pci_open(1): mode 1 addr port (0x0cf8) is 0x80003840 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=70061022) npx0: <math processor> on motherboard npx0: INT 16 interface pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=70061022) pcib0: <AMD-751 host to PCI bridge> on motherboard found-> vendor=0x1022, dev=0x7006, revid=0x25 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base d0000000, size 27 map[14]: type 1, range 32, base e0000000, size 12 map[18]: type 1, range 32, base 0000e000, size 2 found-> vendor=0x1022, dev=0x7007, revid=0x01 class=06-04-00, hdrtype=0x01, mfdev=1 subordinatebus=1 secondarybus=1 found-> vendor=0x1022, dev=0x7408, revid=0x01 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x1022, dev=0x7409, revid=0x03 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x1022, dev=0x740b, revid=0x03 class=06-80-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1022, dev=0x740c, revid=0x06 class=0c-03-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=d, irq=9 map[10]: type 1, range 32, base e0001000, size 12 found-> vendor=0x10ec, dev=0x8139, revid=0x10 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=10 map[10]: type 1, range 32, base 0000e400, size 8 map[14]: type 1, range 32, base e0002000, size 8 found-> vendor=0x10ec, dev=0x8139, revid=0x10 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000e800, size 8 map[14]: type 1, range 32, base e0003000, size 8 pci0: <PCI bus> on pcib0 pcib1: <AMD-751 PCI-PCI (AGP) bridge> at device 1.0 on pci0 found-> vendor=0x5333, dev=0x8a13, revid=0x02 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base d8000000, size 26 pci1: <PCI bus> on pcib1 pci1: <S3 Trio3D/2X graphics accelerator> (vendor=0x5333, dev=0x8a13) at 5.0 irq 5 isab0: <PCI to ISA bridge (vendor=1022 device=7408)> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <AMD 756 ATA66 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 status0=50 status1=50 ata0: mask=03 status0=52 status1=50 ata0: devices = 0x3 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=03 status0=20 status1=30 ata1: mask=03 status0=20 status1=30 ata1: devices = 0x0 ata1: at 0x170 irq 15 on atapci0 chip1: <PCI to Other bridge (vendor=1022 device=740b)> at device 7.3 on pci0 ohci0: <AMD-756 USB Controller> mem 0xe0001000-0xe0001fff irq 9 at device 7.4 on pci0 usb0: OHCI version 1.0, legacy support usb0: <AMD-756 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered rl0: <RealTek 8139 10/100BaseTX> port 0xe400-0xe4ff mem 0xe0002000-0xe00020ff irq 10 at device 10.0 on pci0 rl0: Ethernet address: 00:50:ba:85:e0:58 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: rl0 attached rl1: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xe0003000-0xe00030ff irq 11 at device 12.0 on pci0 rl1: Ethernet address: 00:50:ba:8b:22:65 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: rl1 attached ata-: ata0 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 03 50 psm: status 00 00 50 psm: status 00 03 50 psm: status 00 03 50 psm: data 00 00 00 psm: data 00 00 00 psm: status 00 03 50 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:00 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) isa_probe_children: probing PnP devices BIOS Geometries: 0:03a67f3f 0..934=935 cylinders, 0..127=128 heads, 1..63=63 sectors 1:020bfe3f 0..523=524 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging disabled bpf: lo0 attached ata0-master: success setting WDMA2 on AMD chip ad0: <QUANTUM FIREBALL_TM3840A/A6B.2400> ATA-0 disk at ata0 as master ad0: 3681MB (7539840 sectors), 7480 cyls, 16 heads, 63 S/T, 512 B/S ad0: 1 secs/int, 1 depth queue, WDMA2 ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0 Creating DISK ad0 Creating DISK wd0 ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable ata0-slave: success setting UDMA2 on AMD chip ad1: <QUANTUM FIREBALL CR4.3A/A5U.1200> ATA-4 disk at ata0 as slave ad1: 4110MB (8418816 sectors), 14848 cyls, 9 heads, 63 S/T, 512 B/S ad1: 16 secs/int, 1 depth queue, UDMA33 ad1: piomode=4 dmamode=2 udmamode=4 cblid=0 Creating DISK ad1 Creating DISK wd1 Mounting root from ufs:/dev/ad0s1a ad0: READ command timeout - resetting ata0: resetting devices .. ata0: mask=03 status0=50 status1=50 ata0-master: success setting WDMA2 on AMD chip ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable ata0-slave: success setting UDMA2 on AMD chip done ad0: READ command timeout - resetting ata0: resetting devices .. ata0: mask=03 status0=50 status1=50 ata0-master: success setting WDMA2 on AMD chip ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable ata0-slave: success setting UDMA2 on AMD chip done ad0: READ command timeout - resetting ata0: resetting devices .. ata0: mask=03 status0=50 status1=50 ata0-master: success setting WDMA2 on AMD chip ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable ata0-slave: success setting UDMA2 on AMD chip done ad0: READ command timeout - resetting ata0-master: WARNING: WAIT_READY active=ATA_ACTIVE_ATA ata0-master: success setting PIO4 on generic chip ad0: trying fallback to PIO mode ata0: resetting devices .. ata0: mask=03 status0=50 status1=50 ata0-master: success setting PIO4 on generic chip ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable ata0-slave: success setting UDMA2 on AMD chip done ad0s1: type 0xa5, start 63, end = 7539839, size 7539777 : OK start_init: trying /sbin/init splash: image decoder found: green_saver Linux-ELF exec handler installed -- Joseph Stein; Beaverton, Oregon USA email: joes@wstein.com Finger joes@shasta.wstein.com for contact information and PGP Public Key! Oregon FirePage http://www.ofp.org [OFP18] To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200010250718.e9P7I7405091>