Date: Mon, 13 Jun 2005 03:00:44 GMT From: Lefteris Tsintjelis <lefty@asda.gr> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/74281: Digiboard PCI Xem (64-ports) detection/init problem Message-ID: <200506130300.j5D30i4T046382@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/74281; it has been noted by GNATS.
From: Lefteris Tsintjelis <lefty@asda.gr>
To: bug-followup@FreeBSD.org, lefty@ene.asda.gr
Cc:
Subject: Re: kern/74281: Digiboard PCI Xem (64-ports) detection/init problem
Date: Mon, 13 Jun 2005 05:57:27 +0300
PCI Digi Xem 64 is correctly identified without kernel crashes but still missing
32 ports and comes up with an invalid io address as digi1 (digi1: 0x061: Invalid
i/o address). It tries to erroneously identify another digi (digi1). Also, there
are speed problems even with the 32 ports identified correctly.
The same Digi Xem, with all 64 ports loaded and tested, works perfectly OK with
the EPCA driver loaded instead.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Wed Jun 1 21:05:49 EEST 2005
root@hermes2.asda.gr:/usr/obj/usr/src/sys/CUSTOM
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536858624 (511 MB)
avail memory = 515706880 (491 MB)
MPTable: <OEM00000 PROD00000000>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
cpu1 on motherboard
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xd800-0xd80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 4.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 19 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piix0: <PIIX Timecounter> port 0xe800-0xe80f at device 4.3 on pci0
Timecounter "PIIX" frequency 3579545 Hz quality 0
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xd000-0xd0ff mem 0xe3000000-0xe3000fff irq 19 at device 6.0 on pci0
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xb800-0xb83f mem 0xe2000000-0xe20fffff,0xe2800000-0xe2800fff irq 18 at device 10.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:d0:b7:07:6a:1d
pci0: <simple comms> at device 11.0 (no driver attached)
pci0: <display, VGA> at device 12.0 (no driver attached)
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0303> can't assign resources (port)
Timecounters tick every 1.000 msec
IPv6 packet filtering initialized, default to accept, logging limited to 10 packets/entry
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 10 packets/entry by default
acd0: CDROM <Pioneer CD-ROM ATAPI Model DR-A14S 0104/E1.04> at ata0-master PIO4
Waiting 15 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 3 lun 0
sa0: <HP C1537A L005> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 32)
SMP: AP CPU #1 Launched!
da0 at ahc0 bus 0 target 0 lun 0
da0: <WDIGTL WDE9100 ULTRA2 1.22> Fixed Direct Access SCSI-2 device
da0: 80.000MB/s transfers (40.000MHz, offset 31, 16bit)
da0: 8759MB (17938470 512 byte sectors: 64H 32S/T 8759C)
Mounting root from ufs:/dev/da0s1a
digi0 mem 0xe1800000-0xe1bfffff irq 17 at device 11.0 on pci0
digi0: Digiboard PCI PC/Xem ASIC, 32 ports found
digi1: 0x061: Invalid i/o address
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200506130300.j5D30i4T046382>