Date: Thu, 14 Oct 2010 22:54:24 -0600 From: Scott Long <scottl@samsco.org> To: Bill Desjardins <bill@ethernext.com> Cc: freebsd-scsi@freebsd.org Subject: Re: [amr] LSI Megaraid 320-2X U320 only reports U160 Message-ID: <2283E793-572C-48BC-A5E3-45EBB2298FD1@samsco.org> In-Reply-To: <AANLkTim1eTvYhysFxUah%2BW37fEYkaUkZ%2BB6kVcWGdqe5@mail.gmail.com>
index | next in thread | previous in thread | raw e-mail
The reported negotiation numbers are completely fake. The driver has no clue on the negotiated speed, and no easy means to figure it out. Use a tool like megarc to find out these stats properly. Also, unless you have a specific need to use the amr_cam driver, I'd avoid it, it's just asking for problems related to accidental misuse. Scott On Oct 13, 2010, at 4:23 PM, Bill Desjardins wrote: > Hi, > > I have a LSI Megaraid 320-2X which is not negotiating up to U320. > System is a dell 1950 with the 320-2x connected to a dell 220s > enclosure with 14 x seagate 146GB, 10k drives. the u320-2x has 512MB + > BBU and latest 414J firmware. the server has 2 x dual-core 3ghz xeons, > 4GB and has had all firware updates. also, performance seems off at > ~38MB/sec writes and ~20MB/sec reads (tested to single raid0 disk, > UFS, wrback, cache enabled). > > actual speed negotiated: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > > some info: > > uname > --------------------- > FreeBSD eis1.ethernap.net 8.1-STABLE FreeBSD 8.1-STABLE #0: Tue Oct 12 > 16:07:06 EDT 2010 bill@eis1:/usr/obj/usr/src/sys/GENERIC amd64 > > dmesg > --------------------------------------- > Copyright (c) 1992-2010 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.1-STABLE #0: Tue Oct 12 16:07:06 EDT 2010 > bill@eis1:/usr/obj/usr/src/sys/GENERIC amd64 > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Xeon(R) CPU 5160 @ 3.00GHz (2992.52-MHz K8-class CPU) > Origin = "GenuineIntel" Id = 0x6fb Family = 6 Model = f Stepping = 11 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x4e3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA> > AMD Features=0x20000800<SYSCALL,LM> > AMD Features2=0x1<LAHF> > TSC: P-state invariant > real memory = 4294967296 (4096 MB) > avail memory = 4100427776 (3910 MB) > ACPI APIC Table: <DELL PE_SC3 > > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 2 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > cpu2 (AP): APIC ID: 6 > cpu3 (AP): APIC ID: 7 > ioapic0: Changing APIC ID to 8 > ioapic1: Changing APIC ID to 9 > ioapic2: Changing APIC ID to 10 > ioapic3: Changing APIC ID to 11 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 32-55 on motherboard > ioapic2 <Version 2.0> irqs 64-87 on motherboard > ioapic3 <Version 2.0> irqs 96-119 on motherboard > kbd1 at kbdmux0 > acpi0: <DELL PE_SC3> on motherboard > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 900 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 > pci6: <ACPI PCI bus> on pcib1 > pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci6 > pci7: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci7 > pci8: <ACPI PCI bus> on pcib3 > pcib4: <PCI-PCI bridge> at device 0.0 on pci8 > pci9: <PCI bus> on pcib4 > bce0: <Broadcom NetXtreme II BCM5708 1000Base-T (B1)> mem > 0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci9 > miibus0: <MII bus> on bce0 > brgphy0: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bce0: Ethernet address: 00:15:c5:e9:2d:23 > bce0: [ITHREAD] > pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci7 > pci10: <ACPI PCI bus> on pcib5 > pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci6 > pci11: <ACPI PCI bus> on pcib6 > pcib7: <PCI-PCI bridge> at device 1.0 on pci11 > pci12: <PCI bus> on pcib7 > em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port > 0xecc0-0xecff mem 0xf3ee0000-0xf3efffff irq 32 at device 4.0 on pci12 > em0: [FILTER] > em0: Ethernet address: 00:04:23:09:9f:b4 > em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port > 0xec80-0xecbf mem 0xf3ec0000-0xf3edffff irq 33 at device 4.1 on pci12 > em1: [FILTER] > em1: Ethernet address: 00:04:23:09:9f:b5 > em2: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port > 0xec40-0xec7f mem 0xf3ea0000-0xf3ebffff irq 34 at device 6.0 on pci12 > em2: [FILTER] > em2: Ethernet address: 00:04:23:09:9f:b6 > em3: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port > 0xec00-0xec3f mem 0xf3e80000-0xf3e9ffff irq 35 at device 6.1 on pci12 > em3: [FILTER] > em3: Ethernet address: 00:04:23:09:9f:b7 > pcib8: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > pci1: <ACPI PCI bus> on pcib8 > pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci1 > pci2: <ACPI PCI bus> on pcib9 > mfi0: <Dell PERC 5/i> mem 0xd81f0000-0xd81fffff,0xfc9c0000-0xfc9dffff > irq 78 at device 14.0 on pci2 > mfi0: Megaraid SAS driver Ver 3.00 > mfi0: 6675 (340248585s/0x0020/info) - Shutdown command received from host > mfi0: 6676 (boot + 0s/0x0020/info) - Firmware initialization started > (PCI ID 0015/1028/1f03/1028) > mfi0: 6677 (boot + 0s/0x0020/info) - Firmware version 1.03.50-0461 > mfi0: 6678 (boot + 23s/0x0008/info) - Battery Present > mfi0: 6679 (boot + 23s/0x0020/info) - Package version 5.2.2-0072 > mfi0: 6680 (boot + 50s/0x0004/info) - Enclosure (SES) discovered on PD > 08(e1/s255) > mfi0: 6681 (boot + 50s/0x0002/info) - Unexpected sense: PD > 08(e1/s255), CDB: 1c 01 01 08 00 00, Sense: 70 00 06 00 00 00 00 0a 00 > 00 00 00 29 00 00 00 00 00 > mfi0: 6682 (boot + 51s/0x0002/info) - Inserted: PD 08(e1/s255) > mfi0: 6683 (boot + 51s/0x0002/info) - Inserted: PD 08(e1/s255) Info: > enclPd=08, scsiType=d, portMap=00, > sasAddr=500180b03a3cda00,0000000000000000 > mfi0: 6684 (boot + 51s/0x0002/info) - Inserted: PD 00(e1/s0) > mfi0: 6685 (boot + 51s/0x0002/info) - Inserted: PD 00(e1/s0) Info: > enclPd=08, scsiType=0, portMap=01, > sasAddr=500000e019c66992,0000000000000000 > mfi0: 6686 (boot + 51s/0x0002/info) - Inserted: PD 01(e1/s1) > mfi0: 6687 (boot + 51s/0x0002/info) - Inserted: PD 01(e1/s1) Info: > enclPd=08, scsiType=0, portMap=02, > sasAddr=500000e0132fce92,0000000000000000 > mfi0: 6688 (340248666s/0x0020/info) - Time established as 10/13/10 > 1:31:06; (51 seconds since power on) > mfi0: 6689 (340248723s/0x0008/info) - Battery temperature is normal > mfi0: [ITHREAD] > pcib10: <PCI-PCI bridge> at device 0.2 on pci1 > pci3: <PCI bus> on pcib10 > pcib11: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > pci13: <ACPI PCI bus> on pcib11 > pcib12: <ACPI PCI-PCI bridge> at device 0.0 on pci13 > pci14: <ACPI PCI bus> on pcib12 > pcib13: <PCI-PCI bridge> at device 3.0 on pci14 > pci15: <PCI bus> on pcib13 > amr0: <LSILogic MegaRAID 1.53> mem > 0xd80f0000-0xd80fffff,0xfc600000-0xfc67ffff irq 96 at device 0.0 on > pci15 > amr0: Using 64-bit DMA > amr0: [ITHREAD] > amr0: delete logical drives supported by controller > amrp0: <SCSI Passthrough Bus> on amr0 > amr0: <LSILogic MegaRAID SCSI 320-2X> Firmware 414J, BIOS A100, 512MB RAM > pcib14: <PCI-PCI bridge> at device 5.0 on pci0 > pci16: <PCI bus> on pcib14 > pcib15: <PCI-PCI bridge> at device 6.0 on pci0 > pci17: <PCI bus> on pcib15 > pcib16: <PCI-PCI bridge> at device 7.0 on pci0 > pci18: <PCI bus> on pcib16 > pci0: <base peripheral> at device 8.0 (no driver attached) > pcib17: <ACPI PCI-PCI bridge> at device 28.0 on pci0 > pci4: <ACPI PCI bus> on pcib17 > pcib18: <PCI-PCI bridge> at device 0.0 on pci4 > pci5: <PCI bus> on pcib18 > bce1: <Broadcom NetXtreme II BCM5708 1000Base-T (B1)> mem > 0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci5 > miibus1: <MII bus> on bce1 > brgphy1: <BCM5708C 10/100/1000baseTX PHY> PHY 1 on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bce1: Ethernet address: 00:15:c5:e9:2d:21 > bce1: [ITHREAD] > uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port > 0xcce0-0xccff irq 21 at device 29.0 on pci0 > uhci0: [ITHREAD] > usbus0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0 > uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port > 0xccc0-0xccdf irq 20 at device 29.1 on pci0 > uhci1: [ITHREAD] > usbus1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1 > uhci2: <Intel 631XESB/632XESB/3100 USB controller USB-3> port > 0xcca0-0xccbf irq 21 at device 29.2 on pci0 > uhci2: [ITHREAD] > usbus2: <Intel 631XESB/632XESB/3100 USB controller USB-3> on uhci2 > ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfca00400-0xfca007ff > irq 21 at device 29.7 on pci0 > ehci0: [ITHREAD] > usbus3: EHCI version 1.0 > usbus3: <Intel 63XXESB USB 2.0 controller> on ehci0 > pcib19: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci19: <ACPI PCI bus> on pcib19 > vgapci0: <VGA-compatible display> port 0xdc00-0xdcff mem > 0xd0000000-0xd7ffffff,0xfc2d0000-0xfc2dffff irq 19 at device 13.0 on > pci19 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel 63XXESB2 UDMA100 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on > pci0 > ata0: <ATA channel 0> on atapci0 > ata0: [ITHREAD] > atapci1: <Intel 63XXESB2 SATA300 controller> port > 0xcc98-0xcc9f,0xcc90-0xcc93,0xcc80-0xcc87,0xcc78-0xcc7b,0xcc60-0xcc6f > mem 0xfca00000-0xfca003ff irq 23 at device 31.2 on pci0 > atapci1: [ITHREAD] > ata2: <ATA channel 0> on atapci1 > ata2: [ITHREAD] > ata3: <ATA channel 1> on atapci1 > ata3: [ITHREAD] > atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: does not respond > device_attach: fdc0 attach returned 6 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > uart0: [FILTER] > uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0 > uart1: [FILTER] > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > ppc0: cannot reserve I/O port range > est0: <Enhanced SpeedStep Frequency Control> on cpu0 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 92a092a0600092a > device_attach: est0 attach returned 6 > p4tcc0: <CPU Frequency Thermal Control> on cpu0 > est1: <Enhanced SpeedStep Frequency Control> on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 92a092a0600092a > device_attach: est1 attach returned 6 > p4tcc1: <CPU Frequency Thermal Control> on cpu1 > est2: <Enhanced SpeedStep Frequency Control> on cpu2 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 92a092a0600092a > device_attach: est2 attach returned 6 > p4tcc2: <CPU Frequency Thermal Control> on cpu2 > est3: <Enhanced SpeedStep Frequency Control> on cpu3 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 92a092a0600092a > device_attach: est3 attach returned 6 > p4tcc3: <CPU Frequency Thermal Control> on cpu3 > Timecounters tick every 1.000 msec > ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based > forwarding enabled, default to accept, logging disabled > load_dn_sched dn_sched QFQ loaded > load_dn_sched dn_sched RR loaded > load_dn_sched dn_sched WF2Q+ loaded > load_dn_sched dn_sched FIFO loaded > load_dn_sched dn_sched PRIO loaded > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 480Mbps High Speed USB v2.0 > acd0: CDRW <HL-DT-STCD-RW/DVD-ROM GCC-4244N/B101> at ata0-master UDMA33 > mfi0: 6690 (340248723s/0x0008/info) - Current capacity of the battery > is above threshold > mfid0: <MFI Logical Disk> on mfi0 > mfid0: 139392MB (285474816 sectors) RAID volume 'BOOYAH' is optimal > amr0: delete logical drives supported by controller > amrd0: <LSILogic MegaRAID logical drive> on amr0 > amrd0: 139236MB (285155328 sectors) RAID 0 (optimal) > amrd1: <LSILogic MegaRAID logical drive> on amr0 > amrd1: 139236MB (285155328 sectors) RAID 0 (optimal) > amrd2: <LSILogic MegaRAID logical drive> on amr0 > amrd2: 139236MB (285155328 sectors) RAID 0 (optimal) > amrd3: <LSILogic MegaRAID logical drive> on amr0 > amrd3: 139236MB (285155328 sectors) RAID 0 (optimal) > amrd4: <LSILogic MegaRAID logical drive> on amr0 > amrd4: 139236MB (285155328 sectors) RAID 0 (optimal) > amrd5: <LSILogic MegaRAID logical drive> on amr0 > amrd5: 139236MB (285155328 sectors) RAID 0 (optimal) > amrd6: <LSILogic MegaRAID logical drive> on amr0 > amrd6: 139236MB (285155328 sectors) RAID 0 (optimal) > amrd7: <LSILogic MegaRAID logical drive> on amr0 > amrd7: 139236MB (285155328 sectors) RAID 0 (optimal) > amrd8: <LSILogic MegaRAID logical drive> on amr0 > amrd8: 139236MB (285155328 sectors) RAID 0 (optimal) > amrd9: <LSILogic MegaRAID logical drive> on amr0 > amrd9: 139236MB (285155328 sectors) RAID 0 (optimal) > amrd10: <LSILogic MegaRAID logical drive> on amr0 > amrd10: 278472MB (570310656 sectors) RAID 0 (optimal) > amrd11: <LSILogic MegaRAID logical drive> on amr0 > amrd11: 139236MB (285155328 sectors) RAID 1 (optimal) > ugen0.1: <Intel> at usbus0 > uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > ugen1.1: <Intel> at usbus1 > uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen2.1: <Intel> at usbus2 > uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > ugen3.1: <Intel> at usbus3 > uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub3: 6 ports with 6 removable, self powered > ugen3.2: <vendor 0x413c> at usbus3 > uhub4: <vendor 0x413c product 0xa001, class 9/0, rev 2.00/0.00, addr > 2> on usbus3 > uhub4: 2 ports with 2 removable, self powered > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 > ugen3.3: <Dell> at usbus3 > ukbd0: <Keyboard> on usbus3 > kbd2 at ukbd0 > ums0: <Mouse> on usbus3 > ums0: 3 buttons and [Z] coordinates ID=0 > ugen3.4: <vendor 0x04b4> at usbus3 > uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr > 4> on usbus3 > ugen1.2: <GASIA> at usbus1 > ukbd1: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 2> on usbus1 > kbd3 at ukbd1 > ums1: <GASIA PS2toUSB Adapter, class 0/0, rev 1.10/1.00, addr 2> on usbus1 > ums1: 5 buttons and [XYZ] coordinates ID=1 > uhub5: 4 ports with 4 removable, self powered > (probe0:amr0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 > (probe0:amr0:0:6:0): CAM status: SCSI Status Error > (probe0:amr0:0:6:0): SCSI status: Check Condition > (probe0:amr0:0:6:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > run_interrupt_driven_hooks: still waiting after 60 seconds for xpt_config > acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00 > ses0 at amr0 bus 0 scbus0 target 6 lun 0 > ses0: <DELL PV22XS E.17> Fixed Processor SCSI-3 device > ses0: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > ses0: SAF-TE Compliant Device > pass0 at amr0 bus 0 scbus0 target 0 lun 0 > pass0: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass0: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass1 at amr0 bus 0 scbus0 target 1 lun 0 > pass1: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass1: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass2 at amr0 bus 0 scbus0 target 2 lun 0 > pass2: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass2: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass3 at amr0 bus 0 scbus0 target 3 lun 0 > pass3: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass3: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass4 at amr0 bus 0 scbus0 target 4 lun 0 > pass4: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass4: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass5 at amr0 bus 0 scbus0 target 5 lun 0 > pass5: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass5: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass7 at amr0 bus 0 scbus0 target 8 lun 0 > pass7: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass7: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass8 at amr0 bus 0 scbus0 target 9 lun 0 > pass8: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass8: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass9 at amr0 bus 0 scbus0 target 10 lun 0 > pass9: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass9: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass10 at amr0 bus 0 scbus0 target 11 lun 0 > pass10: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass10: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass11 at amr0 bus 0 scbus0 target 12 lun 0 > pass11: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass11: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass12 at amr0 bus 0 scbus0 target 13 lun 0 > pass12: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass12: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass13 at amr0 bus 0 scbus0 target 14 lun 0 > pass13: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass13: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > pass14 at amr0 bus 0 scbus0 target 15 lun 0 > pass14: <SEAGATE SX3146807LC C807> Fixed Uninstalled SCSI-3 device > pass14: 166.664MB/s transfers (41.666MHz, offset 31, 32bit) > SMP: AP CPU #1 Launched! > SMP: AP CPU #3 Launched! > SMP: AP CPU #2 Launched! > > pciconf -lv > --------------------------- > amr0@pci0:15:0:0: class=0x010400 card=0x05321000 chip=0x04071000 > rev=0x02 hdr=0x00 > vendor = 'LSI Logic (Was: Symbios Logic, NCR)' > device = 'MegaRAID' > class = mass storage > subclass = RAID > > lspci -vvv -s 0f:00.0 > ------------------------------------- > 0f:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 02) > Subsystem: LSI Logic / Symbios Logic MegaRAID 532 SCSI 320-2X > RAID Controller > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr+ Stepping+ SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >> TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 64 (32000ns min), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 96 > Region 0: Memory at d80f0000 (32-bit, prefetchable) > Region 2: Memory at fc600000 (32-bit, non-prefetchable) > Expansion ROM at fc500000 [disabled] > Capabilities: [c0] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [d0] MSI: Enable- Count=1/2 Maskable- 64bit+ > Address: 0000000000000000 Data: 0000 > Capabilities: [e0] PCI-X non-bridge device > Command: DPERE- ERO- RBC=512 OST=1 > Status: Dev=0f:00.0 64bit+ 133MHz+ SCD- USC- DC=bridge > DMMRBC=1024 DMOST=4 DMCRS=16 RSCEM- 266MHz- 533MHz- > > Let me know if I can provide more information. > > Thank you, > > Bill > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org"home | help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2283E793-572C-48BC-A5E3-45EBB2298FD1>