Date: Mon, 5 Aug 2013 19:24:26 -0400 From: "Sam Fourman Jr." <sfourman@gmail.com> To: Dan Mack <mack@macktronics.com> Cc: freebsd-current@freebsd.org Subject: Re: LOR on head ... Message-ID: <CAOFF%2BZ2PzChhXpOeyeaySbSSXp0v_fjw52yfv3n6fpe-kqaeOQ@mail.gmail.com> In-Reply-To: <alpine.BSF.2.00.1308051742010.10696@olive.macktronics.com> References: <alpine.BSF.2.00.1308051742010.10696@olive.macktronics.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I am going to respond to this before I forget.... I had the SAME exact LOR's with ath 9300 and I reported them, however I have since switched out motherboards and the LOR's have strangely diapered here is a full dmesg for a perfectly working system FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 CPU: AMD FX(tm)-4100 Quad-Core Processor (3600.30-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x600f12 Family = 0x15 Model = 0x1 Stepping = 2 Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>> TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 7868518400 (7504 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) cpu0 (BSP): APIC ID: 16 cpu1 (AP): APIC ID: 17 cpu2 (AP): APIC ID: 18 cpu3 (AP): APIC ID: 19 ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130725/tbfadt-630) ioapic0 <Version 2.1> irqs 0-23 on motherboard ioapic1 <Version 2.1> irqs 24-55 on motherboard kbd1 at kbdmux0 acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 450 Event timer "HPET1" frequency 14318180 Hz quality 450 Event timer "HPET2" frequency 14318180 Hz quality 450 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral> at device 0.2 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> mem 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 24 at device 0.0 on pci1 pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 pci2: <ACPI PCI bus> on pcib2 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 44 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x48000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Ethernet address: 60:a4:4c:57:02:c4 pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0 pci3: <ACPI PCI bus> on pcib3 xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe400000-0xfe407fff irq 46 at device 0.0 on pci3 xhci0: 32 byte context size. usbus0 on xhci0 pcib4: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0 pci4: <ACPI PCI bus> on pcib4 xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe300000-0xfe307fff irq 50 at device 0.0 on pci4 xhci1: 32 byte context size. usbus1 on xhci1 pcib5: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0 pci5: <ACPI PCI bus> on pcib5 ath0: <Atheros AR938x> mem 0xfe200000-0xfe21ffff irq 48 at device 0.0 on pci5 ar9300_set_stub_functions: setting stub functions ar9300_set_stub_functions: setting stub functions ar9300_attach: calling ar9300_hw_attach ar9300_hw_attach: calling ar9300_eeprom_attach ar9300_flash_map: unimplemented for now Restoring Cal data from DRAM Restoring Cal data from EEPROM ar9300_hw_attach: ar9300_eeprom_attach returned 0 ath0: RX status length: 48 ath0: RX buffer size: 4096 ath0: TX descriptor length: 128 ath0: TX status length: 36 ath0: TX buffers per descriptor: 4 ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0 ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 stream STBC transmit enabled ath0: [HT] 3 RX streams; 3 TX streams ath0: AR9380 mac 448.3 RF5110 phy 0.0 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 ahci0: <ATI IXP700 AHCI SATA controller> port 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem 0xfe50b000-0xfe50b3ff irq 19 at device 17.0 on pci0 ahci0: AHCI v1.20 with 3 6Gbps ports, Port Multiplier supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe50a000-0xfe50afff irq 18 at device 18.0 on pci0 usbus2 on ohci0 ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe509000-0xfe5090ff irq 17 at device 18.2 on pci0 usbus3: EHCI version 1.0 usbus3 on ehci0 ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe508000-0xfe508fff irq 20 at device 19.0 on pci0 usbus4 on ohci1 ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe507000-0xfe5070ff irq 21 at device 19.2 on pci0 usbus5: EHCI version 1.0 usbus5 on ehci1 pci0: <serial bus, SMBus> at device 20.0 (no driver attached) pci0: <multimedia, HDA> at device 20.2 (no driver attached) isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci6: <ACPI PCI bus> on pcib6 re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xd100-0xd1ff mem 0xfe141000-0xfe1410ff irq 20 at device 5.0 on pci6 re1: Chip rev. 0x10000000 re1: MAC rev. 0x00000000 miibus1: <MII bus> on re1 rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re1: Ethernet address: 00:14:d1:25:d8:23 re2: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xd000-0xd0ff mem 0xfe140000-0xfe1400ff irq 21 at device 6.0 on pci6 re2: Chip rev. 0x10000000 re2: MAC rev. 0x00000000 miibus2: <MII bus> on re2 rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2 rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re2: Ethernet address: 00:14:d1:25:d8:44 ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe506000-0xfe506fff irq 18 at device 20.5 on pci0 usbus6 on ohci2 ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe505000-0xfe505fff irq 22 at device 22.0 on pci0 usbus7 on ohci3 ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe504000-0xfe5040ff irq 23 at device 22.2 on pci0 usbus8: EHCI version 1.0 usbus8 on ehci2 acpi_button0: <Power Button> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range acpi_throttle0: <ACPI CPU Throttling> on cpu0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_throttle2: <ACPI CPU Throttling> on cpu2 acpi_throttle2: failed to attach P_CNT device_attach: acpi_throttle2 attach returned 6 acpi_throttle3: <ACPI CPU Throttling> on cpu3 acpi_throttle3: failed to attach P_CNT device_attach: acpi_throttle3 attach returned 6 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 5.0Gbps Super Speed USB v3.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 usbus4: 12Mbps Full Speed USB v1.0 usbus5: 480Mbps High Speed USB v2.0 usbus6: 12Mbps Full Speed USB v1.0 usbus7: 12Mbps Full Speed USB v1.0 usbus8: 480Mbps High Speed USB v2.0 ugen0.1: <0x1b21> at usbus0 uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen3.1: <ATI> at usbus3 uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 ugen2.1: <ATI> at usbus2 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 ugen1.1: <0x1b21> at usbus1 uhub3: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 ugen6.1: <ATI> at usbus6 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 ugen5.1: <ATI> at usbus5 uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 ugen4.1: <ATI> at usbus4 uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 ugen8.1: <ATI> at usbus8 uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 ugen7.1: <ATI> at usbus7 uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <MDT MD400JD-00LSA0 06.01D06> ATA-7 SATA 1.x device ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 ada1: <MDT MD400JD-00MSA1 10.01E01> ATA-7 SATA 1.x device ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada1: Command Queueing enabled ada1: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C) ada1: Previously was known as ad6 ada2 at ahcich5 bus 0 scbus2 target 0 lun 0 ada2: <MDT MD400JS-00MHB0 02.01C03> ATA-7 SATA 1.x device ada2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) ada2: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C) ada2: Previously was known as ad8 SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1800148234 Hz quality 1000 uhub4: 2 ports with 2 removable, self powered uhub8: 4 ports with 4 removable, self powered uhub6: 5 ports with 5 removable, self powered uhub2: 5 ports with 5 removable, self powered uhub0: 4 ports with 4 removable, self powered uhub3: 4 ports with 4 removable, self powered GEOM: ada2: the secondary GPT table is corrupt or invalid. GEOM: ada2: using the primary only -- recovery suggested. GEOM: diskid/DISK-MDT-MCANKK515312: the secondary GPT table is corrupt or invalid. GEOM: diskid/DISK-MDT-MCANKK515312: using the primary only -- recovery suggested. Root mount waiting for: usbus8 usbus5 usbus3 Root mount waiting for: usbus8 usbus5 usbus3 uhub7: 4 ports with 4 removable, self powered uhub5: 5 ports with 5 removable, self powered uhub1: 5 ports with 5 removable, self powered Trying to mount root from zfs:Puffy []... ugen4.2: <Razer> at usbus4 ukbd0: <Razer Razer BlackWidow, class 0/0, rev 2.00/2.00, addr 2> on usbus4 kbd2 at ukbd0 ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetCTSTimeout: called ar9300_Stub_GetAntennaSwitch: called ar9300_Stub_GetAntennaSwitch: called wlan0: Ethernet address: 7c:c3:a1:b3:fc:af uhid0: <Razer Razer BlackWidow, class 0/0, rev 2.00/2.00, addr 2> on usbus4 uhid1: <Razer Razer BlackWidow, class 0/0, rev 2.00/2.00, addr 2> on usbus4 root@Border:~ # uptime 11:20PM up 15:06, 1 user, load averages: 0.34, 0.33, 0.25 -- Sam Fourman Jr.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAOFF%2BZ2PzChhXpOeyeaySbSSXp0v_fjw52yfv3n6fpe-kqaeOQ>