Date: Mon, 20 May 2002 10:32:33 -0500 From: Damon Anton Permezel <dap@damon.com> To: freebsd-hackers@freebsd.org Subject: 4.6-RC, Dell PowerEdge 4600, PCI boot-time bus walk Message-ID: <20020520103233.C962@damon.com>
index | next in thread | raw e-mail
4.6-RC (which I am assuming is "release candidate") still doesn't
walk the entire PCI bus and find all devices for a Dell Poweredge 4600.
Below, interested parties will be able to peruse the `boot -v' results,
followed by `scanpci -v1'.
I have a single Qlogic F/C card plugged into one of the PCI/X slots.
Boot-time bus walking doesn't find it.
Scanpci does.
The bus in question is pci14. The device in question appears to be
in slot 6. `pciconf -r pci14:6:0 0' produces 0x22001077, as one
might expect. My kernel includes the qlogic ISP driver.
=-= boot -v =-=
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-RC #5: Sun May 19 21:28:22 CDT 2002
dap@damon.com:/usr/obj/usr/src/sys/FUBAR
Calibrating clock(s) ... TSC clock: 1986161216 Hz, i8254 clock: 1193328 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 1985911536 Hz
CPU: Pentium 4 (1985.91-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory = 536805376 (524224K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x003d3000 - 0x1ffe7fff, 532762624 bytes (130069 pages)
avail memory = 518811648 (506652K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00ffe80
bios32: Entry = 0xffe90 (c00ffe90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xc67e
pnpbios: Found PnP BIOS data at 0xc00fe2d0
pnpbios: Entry = f0000:e2f4 Rev = 1.0
Other BIOS signatures found:
ACPI: 000fdc60
Preloaded elf kernel "kernel" at 0xc03ac000.
md0: Malloc disk
Creating DISK md0
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x800078ac
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00111166)
Using $PIR table, 13 entries at 0xc00fc140
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
pcib-: pcib0 exists, using next available unit number
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x1166, dev=0x0011, revid=0x22
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0011, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0011, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0011, revid=0x00
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x1229, revid=0x08
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base fe202000, size 12
map[14]: type 1, range 32, base 0000ecc0, size 6
map[18]: type 1, range 32, base fe000000, size 20
found-> vendor=0x9005, dev=0x001f, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000e800, size 8
map[14]: type 1, range 64, base fe201000, size 12
found-> vendor=0x1044, dev=0xa500, revid=0x02
class=06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=1 secondarybus=1
found-> vendor=0x1044, dev=0xa501, revid=0x02
class=0e-00-01, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base fa000000, size 25
found-> vendor=0x1002, dev=0x4752, revid=0x27
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base fd000000, size 24
map[14]: type 1, range 32, base 0000e400, size 8
map[18]: type 1, range 32, base fe200000, size 12
found-> vendor=0x1166, dev=0x0201, revid=0x93
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0212, revid=0x93
class=01-01-82, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 000008c0, size 3
map[14]: type 3, range 32, base 000008c8, size 2
map[18]: type 1, range 32, base 000008d0, size 3
map[1c]: type 3, range 32, base 000008d8, size 2
map[20]: type 1, range 32, base 000008b0, size 4
found-> vendor=0x1166, dev=0x0225, revid=0x00
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0010, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0010, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0010, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x1166, dev=0x0010, revid=0x03
class=06-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
pci0: <PCI bus> on pcib0
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xecc0-0xecff mem 0xfe000000-0xfe0fffff,0xfe202000-0xfe202fff irq 11 at device 4.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:06:5b:88:18:bc
fxp0: PCI IDs: 8086 1229 1028 0106 0008
fxp0: Dynamic Standby mode is disabled
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: fxp0 attached
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem 0xfe201000-0xfe201fff irq 10 at device 6.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: Manual LVD Termination
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: Downloading Sequencer Program... 416 instructions downloaded
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
pcib9: <PCI to PCI bridge (vendor=1044 device=a500)> at device 8.0 on pci0
pci1: <PCI bus> on pcib9
asr0: <Adaptec Caching SCSI RAID> mem 0xfa000000-0xfbffffff irq 5 at device 8.1 on pci0
asr0: major=154
asr0: ADAPTEC 2100S FW Rev. 370F, 1 channel, 256 CCBs, Protocol I2O
pci0: <ATI Mach64-GR graphics accelerator> (vendor=0x1002, dev=0x4752) at 14.0
atapci0: <ServerWorks CSB5 ATA100 controller> port 0x8b0-0x8bf,0x8d8-0x8db,0x8d0-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device 15.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x08b0
ata0: mask=03 ostat0=50 ostat2=01
ata0-master: ATAPI 14 eb
ata0-slave: ATAPI 14 eb
ata0: mask=03 stat0=00 stat1=01
ata0: devices=0c
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x08b8
ata1: at 0x170 irq 15 on atapci0
isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pci-: pci1 exists, using next available unit number
pcib1: <Host to PCI bridge> on motherboard
found-> vendor=0x14e4, dev=0x1644, revid=0x14
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 64, base f9f00000, size 16
found-> vendor=0x8086, dev=0x0309, revid=0x01
class=06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=3 secondarybus=3
found-> vendor=0x1028, dev=0x000a, revid=0x01
class=01-04-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base f0000000, size 27
pci2: <PCI bus> on pcib1
bge0: <Broadcom BCM5700 Gigabit Ethernet> mem 0xf9f00000-0xf9f0ffff irq 11 at device 6.0 on pci2
using shared irq11.
bge0: Ethernet address: 00:06:5b:88:18:bd
miibus1: <MII bus> on bge0
brgphy0: <BCM5401 10/100/1000baseTX PHY> on miibus1
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bpf: bge0 attached
pcib10: <PCI to PCI bridge (vendor=8086 device=0309)> at device 8.0 on pci2
found-> vendor=0x9005, dev=0x00c5, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 0000dc00, size 8
map[14]: type 1, range 64, base f9dff000, size 12
found-> vendor=0x9005, dev=0x00c5, revid=0x01
class=01-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=b, irq=5
map[10]: type 1, range 32, base 0000d800, size 8
map[14]: type 1, range 64, base f9dfe000, size 12
pci3: <PCI bus> on pcib10
pci3: <unknown card> (vendor=0x9005, dev=0x00c5) at 6.0 irq 10
pci3: <unknown card> (vendor=0x9005, dev=0x00c5) at 6.1 irq 5
aac0: <Dell PERC 3/Di> mem 0xf0000000-0xf7ffffff irq 10 at device 8.1 on pci2
using shared irq10.
aac0: i960RX 100MHz, 118MB cache memory, optional battery present
aac0: Kernel 2.7-0, Build 3153, S/N b821d3
pci-: pci2 exists, using next available unit number
pcib2: <Host to PCI bridge> on motherboard
pci4: <PCI bus> on pcib2
pci-: pci3 exists, using next available unit number
pcib3: <Host to PCI bridge> on motherboard
pci5: <PCI bus> on pcib3
pci-: pci4 exists, using next available unit number
pcib4: <Host to PCI bridge> on motherboard
pci6: <PCI bus> on pcib4
pci-: pci5 exists, using next available unit number
pcib5: <Host to PCI bridge> on motherboard
pci7: <PCI bus> on pcib5
pci-: pci6 exists, using next available unit number
pcib6: <Host to PCI bridge> on motherboard
pci8: <PCI bus> on pcib6
pci-: pci7 exists, using next available unit number
pcib7: <Host to PCI bridge> on motherboard
pci9: <PCI bus> on pcib7
pci-: pci8 exists, using next available unit number
pcib8: <Host to PCI bridge> on motherboard
pci10: <PCI bus> on pcib8
ata-: ata0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xd1fff,0xd2000-0xd27ff,0xec000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
1:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
2:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
3:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: lo0 attached
ata0-slave: ATAPI identify retries exceeded
ata0-master: piomode=4 dmamode=2 udmamode=-1 dmaflag=1
ata0-master: success setting PIO4 on generic chip
acd0: <LG DVD-ROM DRN-8080B/2.13> DVD-ROM drive at ata0 as master
acd0: 512KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
aacd0: <RAID 5> on aac0
aacd0: 32768MB (67108992 sectors)
Creating DISK aacd0
aacd1: <RAID 5> on aac0
aacd1: 32768MB (67108992 sectors)
Creating DISK aacd1
aacd2: <RAID 5> on aac0
aacd2: 38601MB (79056000 sectors)
Creating DISK aacd2
Creating DISK da0
pass0 at asr0 bus 0 target 8 lun 0
pass0: <ADAPTEC RAID-5 370F> Fixed Direct Access SCSI-2 device
pass0: Serial Number +
pass0: Tagged Queueing Enabled
da0 at asr0 bus 0 target 8 lun 0
da0: <ADAPTEC RAID-5 370F> Fixed Direct Access SCSI-2 device
da0: Serial Number +
da0: Tagged Queueing Enabled
da0: 26283MB (53827584 512 byte sectors: 255H 63S/T 3350C)
Mounting root from ufs:/dev/aacd0s1a
aacd0s1: type 0xa5, start 63, end = 67103504, size 67103442 : OK
start_init: trying /sbin/init
da0s1: type 0xa5, start 63, end = 26908874, size 26908812 : OK
da0s2: type 0xa5, start 26908875, end = 53817749, size 26908875 : OK
aacd1s1: type 0xa5, start 63, end = 67103504, size 67103442 : OK
aacd2s1: type 0xa5, start 63, end = 79055864, size 79055802 : OK
aacd1s1: type 0xa5, start 63, end = 67103504, size 67103442 : OK
aacd1s1: type 0xa5, start 63, end = 67103504, size 67103442 : OK
aacd2s1: type 0xa5, start 63, end = 79055864, size 79055802 : OK
da0s1: type 0xa5, start 63, end = 26908874, size 26908812 : OK
da0s2: type 0xa5, start 26908875, end = 53817749, size 26908875 : OK
splash: image decoder found: logo_saver
Linux ELF exec handler installed
bge0: gigabit link up
=-= scanpci -v1 =-=
pci bus 0x0000 cardnum 0x00 function 0x00: vendor 0x1166 device 0x0011
Device unknown
CLASS 0x06 0x00 0x00 REVISION 0x22
BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x10
pci bus 0x0000 cardnum 0x00 function 0x01: vendor 0x1166 device 0x0011
Device unknown
CLASS 0x06 0x00 0x00 REVISION 0x00
BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x10
pci bus 0x0000 cardnum 0x00 function 0x02: vendor 0x1166 device 0x0011
Device unknown
CLASS 0x06 0x00 0x00 REVISION 0x00
BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x10
pci bus 0x0000 cardnum 0x00 function 0x03: vendor 0x1166 device 0x0011
Device unknown
CLASS 0x06 0x00 0x00 REVISION 0x00
BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x10
pci bus 0x0000 cardnum 0x04 function 0x00: vendor 0x8086 device 0x1229
Intel 82557/8/9 10/100MBit network controller
CardVendor 0x1028 card 0x0106 (Card unknown)
STATUS 0x0290 COMMAND 0x0117
CLASS 0x02 0x00 0x00 REVISION 0x08
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08
BASE0 0xfe202000 addr 0xfe202000 MEM
BASE1 0x0000ecc1 addr 0x0000ecc0 I/O
BASE2 0xfe000000 addr 0xfe000000 MEM
MAX_LAT 0x38 MIN_GNT 0x08 INT_PIN 0x01 INT_LINE 0x0b
pci bus 0x0000 cardnum 0x06 function 0x00: vendor 0x9005 device 0x001f
Adaptec 7890/7891
CardVendor 0x1028 card 0x0106 (Card unknown)
STATUS 0x0290 COMMAND 0x0115
CLASS 0x01 0x00 0x00 REVISION 0x01
BIST 0x80 HEADER 0x00 LATENCY 0x20 CACHE 0x08
BASE0 0x0000e801 addr 0x0000e800 I/O
BASE1 0xfe201004 addr 0xfe201000 MEM 64BIT
BASEROM 0xfe100000 addr 0xfe100000 not-decode-enabled
MAX_LAT 0x19 MIN_GNT 0x27 INT_PIN 0x01 INT_LINE 0x0a
BYTE_0 0x540 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x08 function 0x00: vendor 0x1044 device 0xa500
DPT Device unknown
STATUS 0x0290 COMMAND 0x0106
CLASS 0x06 0x04 0x00 REVISION 0x02
HEADER 0x81 LATENCY 0x20
PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x01 SECLT 0x20
IOBASE 0xf000 IOLIM 0xfff SECSTATUS 0x2280
NOPREFETCH_MEMBASE 0x00100000 MEMLIM 0x000fffff
PREFETCH_MEMBASE 0x00100000 MEMLIM 0x000fffff
NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT NO_VGA_EN ISA_EN SERR_EN NO_PERR_EN
pci bus 0x0000 cardnum 0x08 function 0x01: vendor 0x1044 device 0xa501
DPT Device unknown
CardVendor 0x1044 card 0xc03c (DPT, Card unknown)
STATUS 0x0290 COMMAND 0x0116
CLASS 0x0e 0x00 0x01 REVISION 0x02
BIST 0x80 HEADER 0x80 LATENCY 0x20 CACHE 0x10
BASE0 0xfa000008 addr 0xfa000000 MEM PREFETCHABLE
MAX_LAT 0x01 MIN_GNT 0x01 INT_PIN 0x01 INT_LINE 0x05
BYTE_0 0xfe000000 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x0e function 0x00: vendor 0x1002 device 0x4752
ATI Mach64 GR
CardVendor 0x1028 card 0x0106
STATUS 0x0290 COMMAND 0x00a7
CLASS 0x03 0x00 0x00 REVISION 0x27
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08
APBASE 0xfd000000 addr 0xfd000000
BLOCKIO 0x0000e401 addr 0x0000e400
REGBASE 0xfe200000 addr 0xfe200000
MAX_LAT 0x00 MIN_GNT 0x08 INT_PIN 0x00 INT_LINE 0xff
SPARSEIO 0x2ec Block IO enabled Disable 0x46E8
pci bus 0x0000 cardnum 0x0f function 0x00: vendor 0x1166 device 0x0201
Device unknown
CardVendor 0x1166 card 0x0201 (Card unknown)
STATUS 0x2200 COMMAND 0x0147
CLASS 0x06 0x00 0x00 REVISION 0x93
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00
BYTE_0 0x4022a20 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x0f function 0x01: vendor 0x1166 device 0x0212
Device unknown
CardVendor 0x1166 card 0x0212 (Card unknown)
STATUS 0x0200 COMMAND 0x0145
CLASS 0x01 0x01 0x82 REVISION 0x93
BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x00
BASE0 0x000008c1 addr 0x000008c0 I/O
BASE1 0x000008c9 addr 0x000008c8 I/O
BASE2 0x000008d1 addr 0x000008d0 I/O
BASE3 0x000008d9 addr 0x000008d8 I/O
BASE4 0x000008b1 addr 0x000008b0 I/O
BYTE_0 0x99992099 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x0f function 0x03: vendor 0x1166 device 0x0225
Device unknown
CardVendor 0x1166 card 0x0230 (Card unknown)
STATUS 0x0200 COMMAND 0x0005
CLASS 0x06 0x01 0x00 REVISION 0x00
BIST 0x00 HEADER 0x80 LATENCY 0x00 CACHE 0x00
BYTE_0 0x04 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0000 cardnum 0x10 function 0x00: vendor 0x1166 device 0x0010
Device unknown
STATUS 0x22b0 COMMAND 0x0142
CLASS 0x06 0x00 0x00 REVISION 0x03
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00
pci bus 0x0000 cardnum 0x10 function 0x02: vendor 0x1166 device 0x0010
Device unknown
STATUS 0x22b0 COMMAND 0x0142
CLASS 0x06 0x00 0x00 REVISION 0x03
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00
pci bus 0x0000 cardnum 0x11 function 0x00: vendor 0x1166 device 0x0010
Device unknown
STATUS 0x22b0 COMMAND 0x0142
CLASS 0x06 0x00 0x00 REVISION 0x03
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00
pci bus 0x0000 cardnum 0x11 function 0x02: vendor 0x1166 device 0x0010
Device unknown
STATUS 0x22b0 COMMAND 0x0142
CLASS 0x06 0x00 0x00 REVISION 0x03
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x00
pci bus 0x0002 cardnum 0x06 function 0x00: vendor 0x14e4 device 0x1644
Device unknown
CardVendor 0x1028 card 0x0106 (Card unknown)
STATUS 0x02b0 COMMAND 0x0116
CLASS 0x02 0x00 0x00 REVISION 0x14
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08
BASE0 0xf9f00004 addr 0xf9f00000 MEM 64BIT
MAX_LAT 0x00 MIN_GNT 0x40 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x24807 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0002 cardnum 0x08 function 0x00: vendor 0x8086 device 0x0309
Intel Device unknown
STATUS 0x04b0 COMMAND 0x0107
CLASS 0x06 0x04 0x00 REVISION 0x01
HEADER 0x81 LATENCY 0x20
PRIBUS 0x02 SECBUS 0x03 SUBBUS 0x03 SECLT 0x20
IOBASE 0xd000 IOLIM 0xdfff SECSTATUS 0x22a0
NOPREFETCH_MEMBASE 0xf9d00000 MEMLIM 0xf9efffff
PREFETCH_MEMBASE 0xfff00000 MEMLIM 0x000fffff
NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT NO_VGA_EN ISA_EN SERR_EN NO_PERR_EN
pci bus 0x0002 cardnum 0x08 function 0x01: vendor 0x1028 device 0x000a
Device unknown
CardVendor 0x1028 card 0x0106 (Card unknown)
STATUS 0x04b0 COMMAND 0x0116
CLASS 0x01 0x04 0x00 REVISION 0x01
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08
BASE0 0xf0000008 addr 0xf0000000 MEM PREFETCHABLE
BASEROM 0xf9c00000 addr 0xf9c00000 not-decode-enabled
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0a
BYTE_0 0xf8000000 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0003 cardnum 0x06 function 0x00: vendor 0x9005 device 0x00c5
Adaptec Device unknown
CardVendor 0x1028 card 0x00c5 (Card unknown)
STATUS 0x02b0 COMMAND 0x0117
CLASS 0x01 0x00 0x00 REVISION 0x01
BIST 0x80 HEADER 0x80 LATENCY 0x20 CACHE 0x08
BASE0 0x0000dc01 addr 0x0000dc00 I/O
BASE1 0xf9dff004 addr 0xf9dff000 MEM 64BIT
BASEROM 0xf9e00000 addr 0xf9e00000 not-decode-enabled
MAX_LAT 0x19 MIN_GNT 0x28 INT_PIN 0x01 INT_LINE 0x0a
BYTE_0 0x486 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x0003 cardnum 0x06 function 0x01: vendor 0x9005 device 0x00c5
Adaptec Device unknown
CardVendor 0x1028 card 0x00c5 (Card unknown)
STATUS 0x02b0 COMMAND 0x0117
CLASS 0x01 0x00 0x00 REVISION 0x01
BIST 0x80 HEADER 0x80 LATENCY 0x20 CACHE 0x08
BASE0 0x0000d801 addr 0x0000d800 I/O
BASE1 0xf9dfe004 addr 0xf9dfe000 MEM 64BIT
BASEROM 0xf9e00000 addr 0xf9e00000 not-decode-enabled
MAX_LAT 0x19 MIN_GNT 0x28 INT_PIN 0x02 INT_LINE 0x05
BYTE_0 0x486 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
pci bus 0x000e cardnum 0x06 function 0x00: vendor 0x1077 device 0x2200
QLogic Device unknown
CardVendor 0x1077 card 0x0002 (QLogic, Card unknown)
STATUS 0x02b0 COMMAND 0x0117
CLASS 0x01 0x00 0x00 REVISION 0x05
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08
BASE0 0x00007c01 addr 0x00007c00 I/O
BASE1 0xedd00000 addr 0xedd00000 MEM
BASEROM 0xedc00000 addr 0xedc00000 not-decode-enabled
MAX_LAT 0x00 MIN_GNT 0x40 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x22001077 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
--
--
Damon Permezel
dap@damon.com
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hackers" in the body of the message
help
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020520103233.C962>