Date: Tue, 26 Mar 2002 18:28:04 +0100 From: Per olof Ljungmark <peo@intersonic.se> To: FreeBSD Stable <freebsd-stable@freebsd.org> Subject: SMP with VIA chipset system lockups Message-ID: <200203261720.g2QHKoU98819@dns2.s.bonet.se>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
I have been running a dual processor machine for about three months. It is
based on a Microstar 694 motherboard with VIA chipsets (see attached).
I started with 4.4-stable and went through 4.5RC to 4.5 stable. Since a
couple of weeks or so (don't know exactly) I'm having regular lockups with
SMP kernels. and because the system freezes completely I see no traces as to
what is going on. The only way to recover is to pull the plug.
I would be most grateful for information on a) how to try to find out what is
happening and b) if anybody else have similar problems.
Same machine with GENERIC kernel do not exhibit any problems.
Thanks,
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.5-STABLE #0: Mon Mar 25 20:46:42 CET 2002
root@magnolia:/usr/obj/usr/src/sys/MAGNOLIA
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (1002.28-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536870912 (524288K bytes)
avail memory = 517513216 (505384K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00178011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc04bc000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdb90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 11 -> irq 2
IOAPIC #0 intpin 10 -> irq 9
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
IOAPIC #0 intpin 9 -> irq 10
pci1: <PCI bus> on pcib2
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 10
isab0: <VIA 82C686 PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xc000-0xc00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atapci1: <Promise ATA100 controller> port 0xdc00-0xdc3f,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc07 mem 0xda000000-0xda01ffff irq 2 at device 12.0 on pci0
ata2: at 0xcc00 on atapci1
ata3: at 0xd400 on atapci1
pci0: <unknown card> (vendor=0x1274, dev=0x1371) at 15.0 irq 2
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe400-0xe47f mem 0xda020000-0xda02007f irq 9 at device 17.0 on pci0
xl0: Ethernet address: 00:50:da:66:00:ab
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: direction bit not set
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD HP 2500C> PCL,PML,MLC
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
SMP: AP CPU #1 Launched!
ad0: 19092MB <FUJITSU MPG3204AH E> [38792/16/63] at ata0-master UDMA100
acd0: CDROM <SAMSUNG CD-ROM SC-152C> at ata1-slave PIO4
Mounting root from ufs:/dev/ad0s1a
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200203261720.g2QHKoU98819>