Date: Sat, 4 Oct 2008 00:03:07 -0600 (MDT) From: satz@iranger.com To: "Michael Scheidell" <scheidell@secnap.net> Cc: satz@iranger.com, freebsd-hardware@freebsd.org Subject: Re: Intel 6300ESB SATA150 cannot find disk or boot under 6.3 Message-ID: <51738.66.117.128.236.1223100187.squirrel@fnu.iranger.com> In-Reply-To: <48E66ACE.7060702@secnap.net> References: <48E66ACE.7060702@secnap.net>
next in thread | previous in thread | raw e-mail | index | archive | help
It is good to know this problem is larger then just me. It is a real issue in that I cannot begin to use the new port tools using 6.1. This exposes me to current and future security risks unless and until this problem is resolved. I don't know if the developers can determine how much risk there is out there but at least we know it is larger then 1. Anything I can do to help expedite this I will do. Thanks, Greg > Amazingly, this has been going on after a switch from 6.2 (which worked) > to 6.3. > lots of people have reported it, and we accidentally fixed it (but we > can't find documentation on what we fixed). > > it also doesn't work on 7.0 either. > here is a dmsg for a 6.3 one that accidentally works. > (i have a kernel that works), tech playing around with it months ago > can't remember if he used 6.2 drivers or found an obscure patch. > > Now that 5.5 is EOL, and we can't get ports for 5.5, it might be > important for freebsd folks (in their spare time after 7.1 and 6.4 beta) > to fix this. > > or, at least to fix it in 6.4. > > Yes, DELL 750, worked fine in 5.5 (lots of 5.5 systems I can't > upgrade). suggestions that we replace the (faulty?) hard disk > controller cause lots of problems. > Its a different tech (more expensive) in the field that has to replace > hardware, vs the one who can plug in a 6.3 CD rom and passively watch an > automated upgrade. > > Copyright (c) 1992-2008 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 6.3-RELEASE-p1 #0: Mon Apr 28 20:18:31 EDT 2008 > root@someware > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz (2800.11-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf34 Stepping = 4 > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,xTPR> > Logical CPUs per core: 2 > real memory = 1073479680 (1023 MB) > avail memory = 1045966848 (997 MB) > ACPI APIC Table: <DELL PE750 > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > ioapic0: Changing APIC ID to 2 > ioapic1: Changing APIC ID to 3 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > ioapic1 <Version 2.0> irqs 24-47 on motherboard > acpi0: <DELL PE750> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.2> port > 0xece0-0xecff mem 0xfe3e0000-0xfe3fffff irq 18 at device 1.0 on pci1 > em0: Ethernet address: 00:11:43:cd:36:d8 > pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.2> port > 0xdcc0-0xdcff mem 0xfe1e0000-0xfe1fffff,0xfe1c0000-0xfe1dffff irq 24 at > device 1.0 on pci2 > em1: Ethernet address: 00:30:64:05:ef:58 > em2: <Intel(R) PRO/1000 Network Connection Version - 6.7.2> port > 0xdc80-0xdcbf mem 0xfe1a0000-0xfe1bffff,0xfe180000-0xfe19ffff irq 25 at > device 1.1 on pci2 > em2: Ethernet address: 00:30:64:05:ef:59 > uhci0: <UHCI (generic) USB controller> port 0xbce0-0xbcff irq 16 at device > 29.0 on pci0 > uhci0: [GIANT-LOCKED] > usb0: <UHCI (generic) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <UHCI (generic) USB controller> port 0xbcc0-0xbcdf irq 19 at device > 29.1 on pci0 > uhci1: [GIANT-LOCKED] > usb1: <UHCI (generic) USB controller> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > pci0: <base peripheral> at device 29.4 (no driver attached) > pci0: <serial bus, USB> at device 29.7 (no driver attached) > pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > em3: <Intel(R) PRO/1000 Network Connection Version - 6.7.2> port > 0xccc0-0xccff mem 0xfdee0000-0xfdefffff irq 21 at device 2.0 on pci3 > em3: Ethernet address: 00:11:43:cd:36:d9 > pci3: <display, VGA> at device 14.0 (no driver attached) > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel 6300ESB SATA150 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfea0-0xfeaf at device 31.2 on pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > orm0: <ISA Option ROMs> at iomem > 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xec000-0xeffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio1: configured irq 3 not in bitmap of probed irqs 0 > sio1: port may not be enabled > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > ipfw2 initialized, divert loadable, rule-based forwarding enabled, default > to accept, logging disabled > acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master UDMA33 > ad2: 38146MB <Seagate ST340014AS 8.05> at ata1-master SATA150 > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/ad2s1a > bridge0: Ethernet address: aa:29:32:48:bd:5a > wan: link state changed to UP > con0: link state changed to UP > > > -- > Michael Scheidell, CTO > Phone: 561-999-5000, x 1259 > > *| *SECNAP Network Security Corporation > > * Certified SNORT Integrator > * Everything Channel Hot Product of 2008 > * Shaping Information Security Award 2008 > * CRN Magazine Top 40 Emerging Security Vendors > > _________________________________________________________________________ > This email has been scanned and certified safe by SpammerTrap(r). > For Information please see http://www.spammertrap.com > _________________________________________________________________________ > > !DSPAM:48e66ac8893435209328925! > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?51738.66.117.128.236.1223100187.squirrel>