Date: Fri, 13 Mar 1998 18:38:33 -0500 (EST) From: Andre LeClaire <leclaire@sprintmail.com> To: freebsd-stable@FreeBSD.ORG Cc: mike@smith.net.au Subject: root filesystem changes (fwd) Message-ID: <Pine.BSF.3.96.980313183330.193A-100000@farout.lostfork.net>
next in thread | raw e-mail | index | archive | help
I sent this message a couple of days ago, but I think it didn't make it onto the list, so I'm trying again. I've since installed 2.2.6-BETA on two other machines, with the same result. ---------- Forwarded message ---------- Date: Wed, 11 Mar 1998 19:42:48 -0500 (EST) From: Andre LeClaire <leclaire@sprintmail.com> To: freebsd-stable@FreeBSD.ORG Subject: root filesystem changes Well, I did a cvsup and make world yesterday, and now I'm running 2.2.6-BETA! As expected (from reading messages on this list), I was advised upon bootup to modify /etc/fstab to use wd0s2a for /,which I did. Now I notice the kernel reporting: "changing root device to wd0s3a" at boot time. Can this be right? There are only two partitions on the drive: dos on wd0s1 and FreeBSD on wd0s2. Where did wd0s3a come from? Andre _______________________________________________________________________ dmesg output follows: CPU: i486 DX4 (486-class CPU) Origin = "GenuineIntel" Id = 0x483 Stepping=3 Features=0xb<FPU,VME,PSE> real memory = 16777216 (16384K bytes) avail memory = 14778368 (14432K bytes) Probing for devices on PCI bus 0: chip0 <generic PCI bridge (vendor=1060 device=8881 subclass=0)> rev 4 on pci0:16:0 chip1 <generic PCI bridge (vendor=1060 device=886a subclass=1)> rev 14 on pci0:18:0 pci0:18:1: UMC, device=0x673a, class=storage (ide) [no driver assigned] Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x300-0x31f irq 5 on isa ed0: address 00:c0:a8:45:19:c9, type NE2000 (16 bit) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <DSAA-3360> wd0: 348MB (713472 sectors), 929 cyls, 16 heads, 48 S/T, 512 B/S matcd - Matsushita (Panasonic) CD-ROM Driver by FDIV, Version 1(26) 18-Oct-95 matcdc0 at 0x340-0x343 on isa matcdc0 Host interface type 1 matcd0: [CR-5625.00] npx0 on motherboard npx0: INT 16 interface changing root device to wd0s3a ____________________________________________________________________ df -k reports: Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/wd0s2a 31775 14607 14626 50% / /dev/wd0s2f 147935 106599 29502 78% /usr /dev/wd0s2e 9247 879 7629 10% /var procfs 4 4 0 100% /proc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.96.980313183330.193A-100000>