Date: Sun, 31 Mar 2019 14:06:27 +1100 From: Stephen Hocking <stephen.hocking@gmail.com> To: Mark Johnston <markj@freebsd.org> Cc: freebsd-bugs@freebsd.org, freebsd-drivers@freebsd.org Subject: Re: USB3 AXGE Gigabit dongle not detected at boot, but detected when plugged in after boot. Message-ID: <CA%2BxzKjBNQXT9CwVcyuhUdO0OGGAkvKuBZA%2BrKsN39jGGd=mtCQ@mail.gmail.com> In-Reply-To: <20190330172039.GB32034@raichu> References: <CA%2BxzKjAUCAc=EowSZOtyPvO7JqXMNWNRqP9fg6NnBbQEoEn2Pw@mail.gmail.com> <20190330172039.GB32034@raichu>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Mark,
FreeBSD didn't create an interface for it when it was plugged in before
rebooting. This box also has another USB NIC plugged in, an elderly 10/100
one, which is what is presenting as ue0. The box does see it when it's
plugged in prior to powering on (cold start), but not on a reboot (warm
start)
Warm start dmesg & kldstat:
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE-p3 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM
6.0.1)
VT(efifb): resolution 1024x768
CPU: Intel(R) Celeron(R) CPU N3000 @ 1.04GHz (1040.03-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x406c3 Family=0x6 Model=0x4c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x101<LAHF,Prefetch>
Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 7895498752 (7529 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32
(20181003/tbfadt-748)
ioapic0 <Version 2.0> irqs 0-114 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 1040034554 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem
0x90000000-0x90ffffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x91415000-0x914157ff
irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20
at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
hdac0: <Intel (0x2284) HDA Controller> mem 0x91410000-0x91413fff irq 22 at
device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
0xd000-0xd0ff mem 0x91204000-0x91204fff,0x91200000-0x91203fff irq 17 at
device 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master,
1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: dc:fe:07:e1:23:ee
re0: netmap queues/slots: TX 1/256, RX 1/256
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC283 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC283 (Front Analog Headphones)> at nid 33 on hdaa0
hdacc1: <Intel (0x2883) HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel (0x2883) Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel (0x2883) (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm2: <Intel (0x2883) (HDMI/DP 8ch)> at nid 6 on hdaa1
pcm3: <Intel (0x2883) (HDMI/DP 8ch)> at nid 7 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SUV500120G 003056RI> ACS-4 ATA SATA 3.x device
ada0: Serial Number 50026B76829A6BF4
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <DM9601 USB NIC DM9601 USB NIC> at usbus0
Root mount waiting for: usbus0
ugen0.3: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on
usbus0
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.4: <No brand 4 Port KVMSwicther> at usbus0
ukbd0 on uhub1
ukbd0: <Keyboard> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.5: <vendor 0x04d9 USB Keyboard> at usbus0
ukbd1 on uhub1
ukbd1: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 4> on
usbus0
kbd3 at ukbd1
ugen0.6: <Cirque Corporation USB GlidePoint> at usbus0
Root mount waiting for: usbus0
ugen0.7: <Realtek Bluetooth Radio> at usbus0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
udav0 on uhub0
udav0: <DM9601 USB NIC DM9601 USB NIC, class 0/0, rev 1.10/1.01, addr 1> on
usbus0
miibus1: <MII bus> on udav0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus1
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on udav0
ue0: Ethernet address: 00:60:6e:00:f1:51
uhid0 on uhub1
uhid0: <Mouse> on usbus0
device_attach: uhid0 attach returned 12
uhid0 on uhub1
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 4> on
usbus0
uhid1 on uhub1
uhid1: <Mouse> on usbus0
device_attach: uhid1 attach returned 12
ums0 on uhub1
ums0: <EndPoint1 Interrupt Pipe> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
uhid1 on uhub1
uhid1: <Mouse> on usbus0
device_attach: uhid1 attach returned 12
ubt0 on uhub0
ubt0: <Bluetooth Radio> on usbus0
ue0: link state changed to DOWN
ue0: link state changed to UP
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
pflog0: promiscuous mode enabled
Security policy loaded: MAC/ntpd (mac_ntpd)
tun0: link state changed to UP
ue0: promiscuous mode enabled
Id Refs Address Size Name
1 48 0xffffffff80200000 243cd00 kernel
2 1 0xffffffff8263d000 3a9a10 zfs.ko
3 2 0xffffffff829e7000 a4f0 opensolaris.ko
4 1 0xffffffff82f11000 1cc0 if_udav.ko
5 1 0xffffffff82f13000 1550 uether.ko
6 1 0xffffffff82f15000 1800 uhid.ko
7 1 0xffffffff82f17000 23a8 ums.ko
8 1 0xffffffff82f1a000 3aa0 ng_ubt.ko
9 5 0xffffffff82f1e000 a020 netgraph.ko
10 1 0xffffffff82f29000 9608 ng_hci.ko
11 3 0xffffffff82f33000 9c0 ng_bluetooth.ko
12 1 0xffffffff82f34000 cd40 ng_l2cap.ko
13 1 0xffffffff82f41000 1b9c0 ng_btsocket.ko
14 1 0xffffffff82f5d000 2190 ng_socket.ko
15 1 0xffffffff82f60000 9f0 pflog.ko
16 1 0xffffffff82f61000 326f8 pf.ko
17 1 0xffffffff82f94000 acf mac_ntpd.ko
Here's the dmesg & kldstat after a cold start:
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-RELEASE-p3 GENERIC amd64
FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM
6.0.1)
VT(efifb): resolution 1024x768
CPU: Intel(R) Celeron(R) CPU N3000 @ 1.04GHz (1040.04-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x406c3 Family=0x6 Model=0x4c Stepping=3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x101<LAHF,Prefetch>
Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 7895498752 (7529 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
WARNING: L1 data cache covers fewer APIC IDs than a core (0 < 1)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
random: unblocking device.
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 128/32
(20181003/tbfadt-748)
ioapic0 <Version 2.0> irqs 0-114 on motherboard
Launching APs: 1
Timecounter "TSC" frequency 1040037141 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff810f9770, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
cpu0: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 8 on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem
0x90000000-0x90ffffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0
vgapci0: Boot video device
ahci0: <AHCI SATA controller> port 0xf060-0xf07f mem 0x91415000-0x914157ff
irq 19 at device 19.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
xhci0: <Intel Braswell USB 3.0 controller> mem 0x91400000-0x9140ffff irq 20
at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <encrypt/decrypt> at device 26.0 (no driver attached)
hdac0: <Intel (0x2284) HDA Controller> mem 0x91410000-0x91413fff irq 22 at
device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <network> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port
0xd000-0xd0ff mem 0x91204000-0x91204fff,0x91200000-0x91203fff irq 17 at
device 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master,
1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: dc:fe:07:e1:23:ee
re0: netmap queues/slots: TX 1/256, RX 1/256
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC283 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC283 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC283 (Front Analog Headphones)> at nid 33 on hdaa0
hdacc1: <Intel (0x2883) HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel (0x2883) Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel (0x2883) (HDMI/DP 8ch)> at nid 5 on hdaa1
pcm2: <Intel (0x2883) (HDMI/DP 8ch)> at nid 6 on hdaa1
pcm3: <Intel (0x2883) (HDMI/DP 8ch)> at nid 7 on hdaa1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <KINGSTON SUV500120G 003056RI> ACS-4 ATA SATA 3.x device
ada0: Serial Number 50026B76829A6BF4
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada0: Command Queueing enabled
ada0: 114473MB (234441648 512 byte sectors)
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus0
uhub0: 13 ports with 13 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <DM9601 USB NIC DM9601 USB NIC> at usbus0
Root mount waiting for: usbus0
ugen0.3: <vendor 0x1a40 USB 2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x1a40 USB 2.0 Hub, class 9/0, rev 2.00/1.11, addr 2> on
usbus0
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.4: <No brand 4 Port KVMSwicther> at usbus0
ukbd0 on uhub1
ukbd0: <Keyboard> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.5: <vendor 0x04d9 USB Keyboard> at usbus0
ukbd1 on uhub1
ukbd1: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 4> on
usbus0
kbd3 at ukbd1
ugen0.6: <Cirque Corporation USB GlidePoint> at usbus0
Root mount waiting for: usbus0
ugen0.7: <Realtek Bluetooth Radio> at usbus0
Root mount waiting for: usbus0
ugen0.8: <ASIX Elec. Corp. AX88179> at usbus0
lo0: link state changed to UP
re0: link state changed to DOWN
re0: link state changed to UP
udav0 on uhub0
udav0: <DM9601 USB NIC DM9601 USB NIC, class 0/0, rev 1.10/1.01, addr 1> on
usbus0
miibus1: <MII bus> on udav0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus1
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ue0: <USB Ethernet> on udav0
ue0: Ethernet address: 00:60:6e:00:f1:51
uhid0 on uhub1
uhid0: <Mouse> on usbus0
device_attach: uhid0 attach returned 12
uhid0 on uhub1
uhid0: <vendor 0x04d9 USB Keyboard, class 0/0, rev 1.10/3.10, addr 4> on
usbus0
uhid1 on uhub1
uhid1: <Mouse> on usbus0
device_attach: uhid1 attach returned 12
ums0 on uhub1
ums0: <EndPoint1 Interrupt Pipe> on usbus0
ums0: 3 buttons and [XYZ] coordinates ID=0
uhid1 on uhub1
uhid1: <Mouse> on usbus0
device_attach: uhid1 attach returned 12
ubt0 on uhub0
ubt0: <Bluetooth Radio> on usbus0
uhid1 on uhub1
uhid1: <Mouse> on usbus0
device_attach: uhid1 attach returned 12
axge0 on uhub0
axge0: <NetworkInterface> on usbus0
miibus2: <MII bus> on axge0
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on miibus2
rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master,
1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
ue1: <USB Ethernet> on axge0
ue1: Ethernet address: 00:23:55:9c:31:10
ue0: link state changed to DOWN
ue0: link state changed to UP
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ue1: link state changed to DOWN
pflog0: promiscuous mode enabled
Security policy loaded: MAC/ntpd (mac_ntpd)
tun0: link state changed to UP
ue0: promiscuous mode enabled
Id Refs Address Size Name
1 54 0xffffffff80200000 243cd00 kernel
2 1 0xffffffff8263d000 3a9a10 zfs.ko
3 2 0xffffffff829e7000 a4f0 opensolaris.ko
4 1 0xffffffff82f11000 1cc0 if_udav.ko
5 2 0xffffffff82f13000 1550 uether.ko
6 1 0xffffffff82f15000 1800 uhid.ko
7 1 0xffffffff82f17000 23a8 ums.ko
8 1 0xffffffff82f1a000 3aa0 ng_ubt.ko
9 5 0xffffffff82f1e000 a020 netgraph.ko
10 1 0xffffffff82f29000 9608 ng_hci.ko
11 3 0xffffffff82f33000 9c0 ng_bluetooth.ko
12 1 0xffffffff82f34000 2260 if_axge.ko
13 1 0xffffffff82f37000 cd40 ng_l2cap.ko
14 1 0xffffffff82f44000 1b9c0 ng_btsocket.ko
15 1 0xffffffff82f60000 2190 ng_socket.ko
16 1 0xffffffff82f63000 9f0 pflog.ko
17 1 0xffffffff82f64000 326f8 pf.ko
18 1 0xffffffff82f97000 acf mac_ntpd.ko
On Sun, 31 Mar 2019 at 04:20, Mark Johnston <markj@freebsd.org> wrote:
> On Sat, Mar 30, 2019 at 11:44:55AM +1100, Stephen Hocking wrote:
> > Hi all,
> >
> > I have one of these dongles and was hoping to use it as a another
> ethernet
> > interface for the NUC-based firewall I'm using. The is present in FreeBSD
> > 12.
> >
> > FreeBSD fwrout.crafncomp.com 12.0-RELEASE-p3 FreeBSD 12.0-RELEASE-p3
> > GENERIC amd64
> >
> > The following comes up when I plug it in
> >
> > ugen0.7: <ASIX Elec. Corp. AX88179> at usbus0
> > uhid1 on uhub1
> > uhid1: <Mouse> on usbus0
> > device_attach: uhid1 attach returned 12
> > axge0 on uhub0
> > axge0: <NetworkInterface> on usbus0
> > miibus2: <MII bus> on axge0
> > rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 3 on
> miibus2
> > rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> > 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master,
> > 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
> > ue1: <USB Ethernet> on axge0
> > ue1: Ethernet address: 00:23:55:9c:31:10
> > ue1: link state changed to DOWN
> >
> > The following modules are loaded:
> >
> > Id Refs Address Size Name
> > 1 54 0xffffffff80200000 243cd00 kernel
> > 2 1 0xffffffff8263d000 3a9a10 zfs.ko
> > 3 2 0xffffffff829e7000 a4f0 opensolaris.ko
> > 4 1 0xffffffff82f11000 1cc0 if_udav.ko
> > 5 2 0xffffffff82f13000 1550 uether.ko
> > 6 1 0xffffffff82f15000 1800 uhid.ko
> > 7 1 0xffffffff82f17000 23a8 ums.ko
> > 8 1 0xffffffff82f1a000 3aa0 ng_ubt.ko
> > 9 5 0xffffffff82f1e000 a020 netgraph.ko
> > 10 1 0xffffffff82f29000 9608 ng_hci.ko
> > 11 3 0xffffffff82f33000 9c0 ng_bluetooth.ko
> > 12 1 0xffffffff82f34000 cd40 ng_l2cap.ko
> > 13 1 0xffffffff82f41000 1b9c0 ng_btsocket.ko
> > 14 1 0xffffffff82f5d000 2190 ng_socket.ko
> > 15 1 0xffffffff82f60000 9f0 pflog.ko
> > 16 1 0xffffffff82f61000 326f8 pf.ko
> > 17 1 0xffffffff82f94000 acf mac_ntpd.ko
> > 18 1 0xffffffff82f95000 2260 if_axge.ko
> >
> > I've tried preloading if_axge.ko in /boot/loader.conf, but that doesn't
> > make any difference. This bug has been present since FreeBSD 11, at
> least.
>
> What exactly is the bug? FreeBSD doesn't create a network interface for
> the dongle when it's plugged in before booting, or something else?
> Could you provide a dmesg?
>
> I just tried booting a server running -CURRENT with an AX88179 plugged
> in and didn't observe any problems. A ue0 interface was created and the
> link was up.
>
--
"I and the public know
what all schoolchildren learn
Those to whom evil is done
Do evil in return" W.H. Auden, "September 1, 1939"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BxzKjBNQXT9CwVcyuhUdO0OGGAkvKuBZA%2BrKsN39jGGd=mtCQ>