Date: Thu, 06 Jan 2005 13:46:30 +0100 From: "O. Hartmann" <ohartman@uni-mainz.de> To: freebsd-stable@freebsd.org, freebsd-questions@freebsd.org Subject: copying from DVD drive causes crash: vm_fault: pager read error, pid 13421 (cp) on FreeBSD 5.3-STABLE Message-ID: <41DD3326.4050908@uni-mainz.de>
next in thread | raw e-mail | index | archive | help
Doing dd from the DVD drive (NEC ND 3500AG/2.18) fails in a corrupt
image afterwards, copying with 'cp' from a inserted CD triggers the
shown error and box dies immediately:
Jan 6 12:17:20 edda kernel: cd9660: RockRidge Extension
Jan 6 12:17:50 edda kernel: acd0: FAILURE - READ_BIG ILLEGAL REQUEST
asc=0x64 ascq=0x00 error=4<ABORTED>
Jan 6 12:18:07 edda last message repeated 3 times
Jan 6 12:29:44 edda kernel: cd9660: RockRidge Extension
Jan 6 12:30:54 edda kernel: acd0: FAILURE - READ_BIG MEDIUM ERROR
asc=0x11 ascq=0x00 error=4<ABORTED>
Jan 6 12:30:54 edda kernel: vm_fault: pager read error, pid 13421 (cp)
Jan 6 12:30:58 edda kernel: acd0: FAILURE - READ_BIG MEDIUM ERROR
asc=0x11 ascq=0x00 error=4<ABORTED>
Jan 6 12:30:58 edda kernel: vm_fault: pager read error, pid 13421 (cp)
Jan 6 12:31:01 edda kernel: acd0: FAILURE - READ_BIG MEDIUM ERROR
asc=0x11 ascq=0x00 error=4<ABORTED>
Jan 6 12:31:01 edda kernel: vm_fault: pager read error, pid 13421 (cp)
Jan 6 12:31:08 edda kernel: acd0: FAILURE - READ_BIG MEDIUM ERROR
asc=0x11 ascq=0x00 error=4<ABORTED>
Jan 6 12:31:08 edda kernel: vm_fault: pager read error, pid 13421 (cp)
Jan 6 12:31:19 edda kernel: acd0: FAILURE - READ_BIG MEDIUM ERROR
asc=0x11 ascq=0x00 error=4<A
Same happens when trying to to a 'tar ztf file.foo' (tar archive located
on DVD) -> FreeBSD dies and freezes immediately.
Box is a FreeBSD 5.3-STABLE box (cvsupdated and builtworld today).
Hardware is a ASUS CUR-DLS based mainboard, SMP disabled, dmesg shown here:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #23: Thu Jan 6 09:45:18 UTC 2005
root@edda.geo.uni-mainz.de:/usr/obj/usr/src/sys/EDDA
ACPI APIC Table: <ASUS CUR-DLS >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (1000.04-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x387fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
real memory = 1073721344 (1023 MB)
avail memory = 1041166336 (992 MB)
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
netsmb_dev: loaded
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS CUR-DLS> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <display, VGA> at device 7.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0xe800-0xe80f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port
0xd400-0xd40f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device
15.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xfc000000-0xfc000fff irq 9
at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ugen0: OmniVision OV511+ Camera, rev 1.00/1.00, addr 2
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xd000-0xd03f mem 0xfb800000-0xfb81ffff irq 2
1 at device 2.0 on pci1
em0: Ethernet address: 00:07:e9:14:8f:7b
em0: Speed:N/A Duplex:N/A
sym0: <1010-33> port 0xb800-0xb8ff mem
0xfa800000-0xfa801fff,0xfb000000-0xfb0003ff irq 24 at device 5.0 on pci1
sym0: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: handling phase mismatch from SCRIPTS.
sym0: [GIANT-LOCKED]
sym1: <1010-33> port 0xb400-0xb4ff mem
0xf9800000-0xf9801fff,0xfa000000-0xfa0003ff irq 25 at device 5.1 on pci1
sym1: Symbios NVRAM, ID 7, Fast-80, LVD, parity checking
sym1: open drain IRQ line driver, using on-chip SRAM
sym1: using LOAD/STORE-based firmware.
sym1: handling phase mismatch from SCRIPTS.
sym1: [GIANT-LOCKED]
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77a,0x378-0x37f irq 7 drq
3 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROMs> at iomem 0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <8 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
Timecounter "TSC" frequency 1000040141 Hz quality 800
Timecounters tick every 1.250 msec
Fast IPsec: Initialized Security Association Processing.
acd0: DVDR <NEC DVD RW ND-3500AG/2.18> at ata0-master UDMA33
Waiting 3 seconds for SCSI devices to settleacd0: DVDR <NEC DVD RW
ND-3500AG/2.18> at ata0-master UDMA33
Waiting 3 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
(noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
GEOM_LABEL: Label for provider acd0 is iso9660/CDROM.
da0 at sym0 bus 0 target 0 lun 0
da0: <IBM IC35L018UWD210-0 S5BS> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged
Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da1 at sym0 bus 0 target 1 lun 0
da1: <IBM DDYS-T18350N S96H> Fixed Direct Access SCSI-3 device
da1: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged
Queueing Enabled
da1: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
da2 at sym0 bus 0 target 2 lun 0
da2: <FUJITSU MAJ3182MP 5207> Fixed Direct Access SCSI-3 device
da2: 160.000MB/s transfers (80.000MHz, offset 62, 16bit), Tagged
Queueing Enabled
da2: 17429MB (35694904 512 byte sectors: 255H 63S/T 2221C)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-3500AG 2.18> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [67346 x 2048 byte records]
GEOM_LABEL: Label for provider da0s1d is ufs/var.
GEOM_LABEL: Label for provider da0s1e is ufs/compat.
GEOM_LABEL: Label for provider da0s1f is ufs/src.
GEOM_LABEL: Label for provider da0s1g is ufs/usr.
GEOM_LABEL: Label for provider da0s1h is ufs/local.
GEOM_LABEL: Label for provider da1s1d is ufs/obj.
GEOM_LABEL: Label for provider da1s1e is ufs/ports.
GEOM_LABEL: Label for provider da1s1f is ufs/scratch.
GEOM_LABEL: Label for provider da1s1g is ufs/data.
Mounting root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
WARNING: /compat was not properly dismounted
WARNING: /homes was not properly dismounted
/homes: superblock summary recomputed
WARNING: /usr was not properly dismounted
WARNING: /usr/data was not properly dismounted
WARNING: /usr/local was not properly dismounted
WARNING: /usr/obj was not properly dismounted
WARNING: /usr/ports was not properly dismounted
WARNING: /usr/scratch was not properly dismounted
WARNING: /usr/src was not properly dismounted
WARNING: /var was not properly dismounted
em0: Link is up 100 Mbps Full Duplex
pflog0: promiscuous mode enabled
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41DD3326.4050908>