Date: Thu, 16 Jan 2020 21:32:33 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 243401] ahci driver problems with Marvell 88SE9230 (Dell BOSS-S1) Message-ID: <bug-243401-227@https.bugs.freebsd.org/bugzilla/>
next in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D243401 Bug ID: 243401 Summary: ahci driver problems with Marvell 88SE9230 (Dell BOSS-S1) Product: Base System Version: 11.3-RELEASE Hardware: Any OS: Any Status: New Severity: Affects Some People Priority: --- Component: kern Assignee: bugs@FreeBSD.org Reporter: pen@lysator.liu.se This feels more like a firmware problem than a driver problem but since it apparently works in Windows and Linux, but not in FreeBSD I figured I'd rep= ort it here anyway...=20 (Probably not meaningful to try to report it to Dell since FreeBSD isn't officially supported by them) Dell BOSS-S1 (Marvell 88SE9230 based) M.2 "RAID" cards running Dells latest firmware (2.5.13.3022 A06 or 2.5.13.3022 A05) does something strange - when= the kernel has loaded (from the drives on this card) it fails to detect the dis= ks ("unconfigured" disks, non-RAID setup) and then root fs mounting fails... (We have two M.2 SSDs connected to that controller) With firmware 2.5.13.3016 A04 it gives a couple of errors at kernel boot ti= me, but does detect the disks and the system boots. With firmware 2.5.13.3011 A03, 2.5.13.2009 A02 or 2.5.13.2008 A01 no errors= are printed and the disks are found just fine. (But there are bugs fixed in the later releases that probably would be nice= to have.. I have had M.2 drive go "offline" for me at 2008/A01-firmware so tha= t's why I tried the later versions... A summary of the (Dell) firmware fixes and my test results: 2.5.13.3022 A06 Fixes: None Enhancement: Added support for 15G platforms 2.5.13.3020 A05 Status: - Does not work, gives errors: - 'ahcich16: stopping AHCI engine failed' - Detects a 'pass23', but no disk devices: pass23 at ahcich16 bus 0 scbus19 target 0 lun 0 pass23: <Marvell Console 1.01> Removable Processor SCSI device pass23: Serial Number HKDP221516WL pass23: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes) Fixes: - Fixed an issue where system will hang during Boot when PERC is in HBA mode with BOSS-S1 - When CLI is running, default temporary file directory & permission in Linux and ESXi Operating systems are changed as appropriate Enhancement: N/A 2.5.13.3016 A04 Status: - Works and detects all disks, but gives errors about: - 'ahcich14: stopping AHCI engine failed' - 'ahcich15: stopping AHCI engine failed' - 'ahcich16: stopping AHCI engine failed' Fixes: - Fixed a behavior of BOSS-S1 firmware incorrectly marking M.2 drive offline/failed - Fixed a behavior where ESXi Host goes unresponsive - Fixed a behavior where BOSS-S1 Management path will not respond to Management commands - Fixed a behavior where BOSS-S1 boot partition becomes inaccessible - Fixed a behavior where ESXi host results in PSOD due to unexpected I/O timeout - Fixed a behavior where rebuild will not be proceed during error handling condition Enhancement: - Enhanced/ Added MVCLI events for command timeout - Added SLES15 Support 2.5.13.3011 A03 Status: - Works Fixes: - Fixed M.2 disk failure when medium error is present Enhancement: - Enhanced medium error handling 2.5.13.2009 A02 Status: - Works Fixes: - Fixed Sideband functionality issue Enhancement: - Added support for Rollback of Controller Firmware through iDRAC/LC 2.5.13.2008 A01 Status: - Works Initial release Kernel boot output (the relevant parts) from a firmware 3016 A04 boot: ahci2: <Marvell 88SE9230 AHCI SATA controller> port 0x8028-0x802f,0x8034-0x8037,0x8020-0x8027,0x8030-0x8033,0x8\ 000-0x801f mem 0xb8800000-0xb88007ff at device 0.0 numa-domain 0 on pci9 ahci2: AHCI v1.20 with 3 6Gbps ports, Port Multiplier not supported ahci2: quirks=3D0x900<NOBSYRES,ALTSIG> ahcich14: <AHCI channel> at channel 0 on ahci2 ahcich15: <AHCI channel> at channel 1 on ahci2 ahcich16: <AHCI channel> at channel 2 on ahci2 ... ahcich16: stopping AHCI engine failed ahcich16: stopping AHCI engine failed ... ahcich16: stopping AHCI engine failed ahcich15: stopping AHCI engine failed ada0 at ahcich14 bus 0 scbus17 target 0 lun 0 ada0: <SSDSCKJB120G7R N201DL43> ACS-3 ATA SATA 3.x device ada0: Serial Number PHDW817002Z4150A ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 114473MB (234441648 512 byte sectors) ada1 at ahcich15 bus 0 scbus18 target 0 lun 0 ada1: <SSDSCKJB120G7R N201DL43> ACS-3 ATA SATA 3.x device ada1: Serial Number PHDW817002WC150A ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada1: Command Queueing enabled ada1: 114473MB (234441648 512 byte sectors) pass25 at ahcich16 bus 0 scbus19 target 0 lun 0 pass25: <Marvell Console 1.01> Removable Processor SCSI device pass25: Serial Number HKDP221516WL pass25: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192byte= s) On 3022 the ada0 and ada1 devices never get detected, and it only complains about not being able to stop ahcich16, nothing about 14 & 15. --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-243401-227>