Date: Fri, 16 Mar 2012 17:09:10 -0700 (PDT) From: Jin Guojun <jguojun@sbcglobal.net> To: freebsd-hardware@freebsd.org Cc: freebsd-x11@freebsd.org Subject: ATI RV6 10 [Radeon HD 2400 XT] dual video card support Message-ID: <1331942950.76662.YahooMailClassic@web82202.mail.mud.yahoo.com>
next in thread | raw e-mail | index | archive | help
Link below is the card specification: http://www.amd.com/us/products/desktop/graphics/ati-radeon-hd-2000/hd-2400/= Pages/ati-radeon-hd-2400-gpu-specs.aspx According its spec., this video card has two independent display controller= s. However, X -configure detects only one controller, but after startx, xrandr= shows two controllers.=20 The question is that is this video card fully supported by X and FreeBSD? If so, how to use X to configure it for two displays? -Jin =0A% xrandr=20 =0AScreen 0: minimum 320 x 200, current 1600 x 1200, maximum 1600 x 1600 =0ADVI-1 connected 1600x1200+0+0 (normal left inverted right x axis y axis)= 367mm x 275mm =0A=A0=A0 1600x1200=A0=A0=A0=A0=A0 60.0*+ =0A=A0=A0 1280x1024=A0=A0=A0=A0=A0 75.0=A0=A0=A0=A0 60.0=A0=20 =0A=A0=A0 1152x864=A0=A0=A0=A0=A0=A0 75.0=A0=20 =0A=A0=A0 1024x768=A0=A0=A0=A0=A0=A0 75.0=A0=A0=A0=A0 60.0=A0=20 =0A=A0=A0 800x600=A0=A0=A0=A0=A0=A0=A0 75.0=A0=A0=A0=A0 60.3=A0=20 =0A=A0=A0 640x480=A0=A0=A0=A0=A0=A0=A0 75.0=A0=A0=A0=A0 59.9=A0=20 =0A=A0=A0 720x400=A0=A0=A0=A0=A0=A0=A0 70.1=A0=20 =0ADVI-0 connected 1600x1200+0+0 (normal left inverted right x axis y axis)= 367mm x 275mm =0A=A0=A0 1600x1200=A0=A0=A0=A0=A0 60.0*+ =0A=A0=A0 1280x1024=A0=A0=A0=A0=A0 75.0=A0=A0=A0=A0 60.0=A0=20 =0A=A0=A0 1152x864=A0=A0=A0=A0=A0=A0 75.0=A0=20 =0A=A0=A0 1024x768=A0=A0=A0=A0=A0=A0 75.0=A0=A0=A0=A0 60.0=A0=20 =0A=A0=A0 800x600=A0=A0=A0=A0=A0=A0=A0 75.0=A0=A0=A0=A0 60.3=A0=20 =0A=A0=A0 640x480=A0=A0=A0=A0=A0=A0=A0 75.0=A0=A0=A0=A0 59.9=A0=20 =0A=A0=A0 720x400=A0=A0=A0=A0=A0=A0=A0 70.1=A0
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1331942950.76662.YahooMailClassic>