Date: Thu, 21 Aug 2003 00:14:44 +0200 (CEST) From: Lukas Razik <root@consystor.homeip.net> To: FreeBSD-gnats-submit@FreeBSD.org Subject: kern/55822: No ACPI power off with SMP kernel Message-ID: <200308202214.h7KMEiWe000763@consystor.razik.de> Resent-Message-ID: <200308202220.h7KMKBwT012979@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 55822 >Category: kern >Synopsis: No ACPI power off with SMP kernel >Confidential: no >Severity: serious >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Wed Aug 20 15:20:10 PDT 2003 >Closed-Date: >Last-Modified: >Originator: Lukas Razik <lukas@razik.de> >Release: FreeBSD 5.1-RELEASE i386 >Organization: >Environment: System: FreeBSD consystor.razik.de 5.1-RELEASE FreeBSD 5.1-RELEASE #0: Wed Aug 20 03:23:41 CEST 2003 root@consystor.razik.de:/usr/obj/usr/src/sys/RAZIK-2003-08-20-SMP i386 CPUs: 2 x PIII 800MHz (133MHz FSB) RAM: 3 x 512MB @ 133MHz Chipset: VIA Apollo Pro133A with HPT370 RAID controller Motherboard: EPOX EP-D3VA >Description: If I build the kernel with SMP and APIC_IO support the power-off function doesn't work. If I want to shutdown the computer with 'halt' or the switch I only get the message that the system has been halted and I can reboot it by pressing a key. Without SMP and APIC_IO all works fine! In my dmesg (see below) are ACPI errors... 'kldstat' output: Id Refs Address Size Name 1 9 0xc0100000 352edc kernel 2 1 0xc0453000 4a30c acpi.ko 3 1 0xc2e81000 2000 blank_saver.ko 4 1 0xc71b7000 18000 linux.ko My 'dmesg': --- BEGIN --- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-RELEASE #0: Wed Aug 20 03:23:41 CEST 2003 root@consystor.razik.de:/usr/obj/usr/src/sys/RAZIK-2003-08-20-SMP Preloaded elf kernel "/boot/kernel/kernel" at 0xc049f000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc049f1f4. Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 801822191 Hz CPU: Intel Pentium III (801.82-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1610547200 (1535 MB) avail memory = 1561665536 (1489 MB) Programming 24 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Pentium Pro MTRR support enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <VIA692 AWRDACPI> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00fdba0 acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI-fast" frequency 3579545 Hz ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.FDC0._CRS] (Node 0xc6dd2640), AE_AML_UNINITIALIZED_LOCAL ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.FDC0._CRS] (Node 0xc6dd2640), AE_AML_UNINITIALIZED_LOCAL can't fetch resources for \\_SB_.PCI0.FDC0 - AE_AML_UNINITIALIZED_LOCAL acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 IOAPIC #0 intpin 19 -> irq 2 IOAPIC #0 intpin 17 -> irq 5 IOAPIC #0 intpin 16 -> irq 10 IOAPIC #0 intpin 18 -> irq 11 agp0: <VIA 82C691 (Apollo Pro) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <VIA 82C596B UDMA66 controller> port 0xc000-0xc00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 2 at device 7.2 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xc800-0xc81f irq 5 at device 9.0 on pci0 ed0: address 00:20:18:ba:18:8a, type NE2000 (16 bit) atapci1: <HighPoint HPT370 UDMA100 controller> port 0xdc00-0xdcff,0xd800-0xd803,0xd400-0xd407,0xd000-0xd003,0xcc00-0xcc07 irq 10 at device 11.0 on pci0 ata2: at 0xcc00 on atapci1 ata3: at 0xd400 on atapci1 pci0: <multimedia, video> at device 12.0 (no driver attached) pci0: <multimedia> at device 12.1 (no driver attached) pci0: <multimedia, audio> at device 13.0 (no driver attached) fdc0: cannot reserve I/O port range (1 ports) sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: cannot reserve I/O port range (1 ports) orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 pmtimer0 on isa0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0% ad4: 28629MB <ST330620A> [58168/16/63] at ata2-master UDMA100 ad6: 28629MB <ST330620A> [58168/16/63] at ata3-master UDMA100 acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-106S 0122> at ata0-master PIO4 acd1: CD-RW <CR-48X5TE> at ata1-master PIO4 ar0: 57259MB <ATA RAID0 array> [7299/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad6 at ata3-master SMP: AP CPU #1 Launched! Opened disk ad4 -> 1 Opened disk ad6 -> 1 Opened disk ad6 -> 1 Mounting root from ufs:/dev/ar0s2a --- END --- My KERNCONF: --- BEGIN --- machine i386 #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident RAZIK-2003-08-20-SMP #To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" #Default places to look for devices. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options MD_ROOT #MD is a potential root device options NFSCLIENT #Network Filesystem Client options NFSSERVER #Network Filesystem Server options NFS_ROOT #NFS usable as root device, requires NFSCLIENT options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 #options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. # Debugging for use in -current #options DDB #Enable the kernel debugger #options INVARIANTS #Enable calls of extra sanity checking options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS #Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O device isa #device eisa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives #device atapifd # ATAPI floppy drives #device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device ahd # AHA39320/29320 and onboard AIC79xx devices #device amd # AMD 53C974 (Tekram DC-390(T)) #device isp # Qlogic family #device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of cr') #device trm # Tekram DC395U/UW/F DC315U adapters #device adv # Advansys SCSI adapters #device adw # Advansys wide SCSI adapters #device aha # Adaptec 154x SCSI adapters #device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. #device bt # Buslogic/Mylex MultiMaster SCSI adapters #device ncv # NCR 53C500 #device nsp # Workbit Ninja SCSI-3 #device stg # TMC 18C30/18C50 # RAID controllers interfaced to the SCSI subsystem #device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID #device ciss # Compaq Smart RAID 5* #device dpt # DPT Smartcache III, IV - See NOTES for options! #device iir # Intel Integrated RAID #device mly # Mylex AcceleRAID/eXtremeRAID # SCSI peripherals #device scbus # SCSI bus (required) #device ch # SCSI media changers #device da # Direct Access (disks) #device sa # Sequential Access (tape etc) #device cd # CD #device pass # Passthrough device (direct SCSI access) #device ses # SCSI Environmental Services (and SAF-TE) # RAID controllers #device aac # Adaptec FSA RAID #device aacp # SCSI passthrough for aac (requires CAM) #device amr # AMI MegaRAID #device ida # Compaq Smart RAID #device ips # IBM (Adaptec) ServeRAID #device mlx # Mylex DAC960 family #device pst # Promise Supertrak SX6000 #device twe # 3ware ATA RAID # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # Pcmcia and cardbus bridge support device cbb # cardbus (yenta) bridge #device pcic # ExCA ISA and PCI bridges device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (`Tulip'') #device em # Intel PRO/1000 adapter Gigabit Ethernet Card #device txp # 3Com 3cR990 (`Typhoon'') #device vx # 3Com 3c590, 3c595 (`Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (`Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device sk # SysKonnect SK-984x and SK-982x gigabit ethernet #device ste # Sundance ST201 (D-Link DFE-550TX) #device ti # Alteon Networks Tigon I/II gigabit ethernet #device tl # Texas Instruments ThunderLAN #device tx # SMC EtherPower II (83c170 `EPIC'') #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (`Boomerang'', `Cyclone'') #device bge # Broadcom BCM570xx Gigabit Ethernet # ISA Ethernet NICs. pccard nics included. #device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards #device ex # Intel EtherExpress Pro/10 and Pro/10+ #device ep # Etherlink III based cards #device fe # Fujitsu MB8696x based cards #device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. #device lnc # NE2100, NE32-VL Lance Ethernet cards #device sn # SMC's 9000 series of ethernet chips #device xe # Xircom pccard ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards #device wlan # 802.11 support #device an # Aironet 4500/4800 802.11 wireless NICs. #device awi # BayStack 660 and others #device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices - the number indicates how many units to allocate. device random # Entropy device device loop # Network loopback device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The pf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer #device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse #device urio # Diamond Rio 500 MP3 player #device uscanner # Scanners # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device axe # ASIX Electronics USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet # FireWire support #device firewire # FireWire bus code #device sbp # SCSI over FireWire (Requires scbus and da) #device fwe # Ethernet over FireWire (non-standard!) --- END --- >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200308202214.h7KMEiWe000763>