Date: 26 Dec 2005 11:03:08 -0500 From: Lowell Gilbert <lowell@be-well.ilk.org> To: "G Trutt" <mr_trutt@hotmail.com> Cc: questions@freebsd.org Subject: Re: Alpha 6.0 Install... Message-ID: <44mzinzw03.fsf@be-well.ilk.org> In-Reply-To: <BAY109-F30381633B0520A4BC4B8AFFC340@phx.gbl> References: <BAY109-F30381633B0520A4BC4B8AFFC340@phx.gbl>
next in thread | previous in thread | raw e-mail | index | archive | help
This message got caught in my spam trap, for reasons that probably
affect other people too, so I hope the question doesn't fall
completely between the cracks.
"G Trutt" <mr_trutt@hotmail.com> writes:
> I am trying to install FreeBSD for Alpha, release 6.0. I have read the
> documentation, but nothing I've read gives me any hints about the issue I'm
> having with boot/install from CDROM. I have attached a copy of my console
> output, which should give a good look at the gory details. I would
> appreciate any pointers you could offer! I keep getting a cpu fault/panic
> and nothing I've come across gives me any direction or starting point?
>
> Please help.
>
>
> Gorden Trutt
> mr_trutt@hotmail.com
> >>>show
> auto_action HALT
> boot_dev dka0.0.0.6.0
> boot_file
> boot_osflags 0,0
> boot_reset OFF
> bootdef_dev dka0.0.0.6.0
> booted_dev
> booted_file
> booted_osflags
> bus_probe_algorithm old
> char_set 0
> console serial
> control_disfd enable
> control_idema enable
> control_irq11 scsi
> control_irq12 mouse
> control_scsi_term internal
> controlp on
> dump_dev
> enable_audit ON
> ewa0_arp_tries 3
> ewa0_bootp_file
> ewa0_bootp_server
> ewa0_bootp_tries 3
> ewa0_def_ginetaddr 0.0.0.0
> ewa0_def_inetaddr 0.0.0.0
> ewa0_def_inetfile
> ewa0_def_sinetaddr 0.0.0.0
> ewa0_def_subnetmask 0.0.0.0
> ewa0_ginetaddr 0.0.0.0
> ewa0_inet_init bootp
> ewa0_inetaddr 0.0.0.0
> ewa0_inetfile
> ewa0_loop_count 3e8
> ewa0_loop_inc a
> ewa0_loop_patt ffffffff
> ewa0_loop_size 2e
> ewa0_lp_msg_node 1
> ewa0_mode BNC
> ewa0_protocols MOP
> ewa0_sinetaddr 0.0.0.0
> ewa0_tftp_tries 3
> ffauto OFF
> ffnext OFF
> kbd_hardware_type PCXAL
> language 36
> language_name English(American)
> license MU
> mopv3_boot OFF
> os_type UNIX
> pal VMS PALcode V5.56-2, OSF PALcode X1.46-2
> pci_parity off
> pka0_disconnect 1
> pka0_fast 1
> pka0_host_id 7
> quick_start OFF
> scsi_poll ON
> srm2ctrl
> srm2dev
> sys_serial_num
> tga_sync_green 2
> timer_tps 1
> tt_allow_login 1
> tty_dev 0
> version V7.0-9 Mar 18 1999 13:41:11
> >>>
>
> >>>show dev
> dka0.0.0.6.0 DKA0 RZ28M 0568
> dka100.1.0.6.0 DKA100 RZ28M 0568
> dka400.4.0.6.0 DKA400 RRD45 1645
> dva0.0.0.0.1 DVA0
> ewa0.0.0.11.0 EWA0 08-00-2B-E7-7F-DA
> pka0.7.0.6.0 PKA0 SCSI Bus ID 7
>
> >>>boot dka400
> (boot dka400.4.0.6.0 -flags 0,0)
> block 0 of dka400.4.0.6.0 is a valid boot block
> reading 406 blocks from dka400.4.0.6.0
> bootstrap code read in
> base = 1f2000, image_start = 0, image_bytes = 32c00
> initializing HWRPB at 2000
> initializing page table at 1e4000
> initializing machine state
> setting affinity to the primary CPU
> jumping to bootstrap code
> Consoles: SRM firmware console
> VMS PAL rev: 0x1000000010538
> OSF PAL rev: 0x100000002012e
> Switch to OSF PAL code succeeded.
>
> FreeBSD/alpha SRM CD9660 boot, Revision 1.2
> (root@ds10.freebie.xs4all.nl, Wed Nov 2 16:27:21 UTC 2005)
> Memory: 131072 k
> Loading /boot/defaults/loader.conf
> /boot/kernel/kernel data=0x619410+0x39820 syms=[0x8+0x6c060+0x8+0x59b68]
> |
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [/boot/kernel/kernel]...
> Entering /boot/kernel/kernel at 0xfffffc000034a9d0...
> Unrecognized boot flag '0'.
> Unrecognized boot flag ','.
> Unrecognized boot flag '0'.
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-RELEASE #0: Thu Nov 3 01:10:43 UTC 2005
> root@ds10.freebie.xs4all.nl:/usr/obj/usr/src/sys/GENERIC
> AlphaStation 200/400 ("Avanti")
> AlphaStation 200 4/233, 233MHz
> 8192 byte page size, 1 processor.
> CPU: EV45 (21064A) major=6 minor=0
> OSF PAL rev: 0x100000002012e
> real memory = 132169728 (126 MB)
> avail memory = 115351552 (110 MB)
> apecs0: <DECchip 21071 Core Logic chipset>
> pcib0: <2107x PCI host bus adapter> on apecs0
> pci0: <PCI bus> on pcib0
> sym0: <810> port 0x10000-0x100ff mem 0x82000000-0x820000ff irq 11 at device
> 6.0
> on pci0
> sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
> sym0: interrupting at ISA irq 11
> sym0: [GIANT-LOCKED]
> isab0: <PCI-ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> de0: <Digital 21040 Ethernet> port 0x10100-0x1017f mem 0x82000100-0x8200017f
> irq
> 5 at device 11.0 on pci0
> de0: DEC 21040 [10Mb/s] pass 2.3
> de0: Ethernet address: 08:00:2b:e7:7f:da
> de0: interrupting at ISA irq 5
> ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
> ata0: interrupting at ISA irq 14
> ata1 at port 0x170-0x177,0x376 irq 15 on isa0
> ata1: interrupting at ISA irq 15
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd0: interrupting at ISA irq 1
> atkbd0: [GIANT-LOCKED]
> fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
> isa0
> fdc0: interrupting at ISA irq 6
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
> ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> lpt0: <Printer> on ppbus0
> lpt0: Polled port
> ppi0: <Parallel I/O> on ppbus0
> ppc0: interrupting at ISA irq 7
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A, console
> sio0: interrupting at ISA irq 4
> sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
> sio1: type 16550A
> sio1: interrupting at ISA irq 3
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Timecounter "alpha" frequency 233340819 Hz quality 800
> Timecountmd0: Preers tick every 0.976 msec
> Waiting 5 seconds for SCSI devices to settle
> loaded image </boot/mfsroot> 4423680 bytes at 0xfffffc0000a18808
> da1 at sym0 bus 0 target 1 lun 0
> da1: <DEC RZ28M (C) DEC 0568> Fixed Direct Access SCSI-2 device
> da1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
> da1: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C)
> da0 at sym0 bus 0 target 0 lun 0
> da0: <DEC RZ28M (C) DEC 0568> Fixed Direct Access SCSI-2 device
> da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
> da0: 2007MB (4110480 512 byte sectors: 255H 63S/T 255C)
> cd0 at sym0 bus 0 target 4 lun 0
> cd0: <DEC RRD45 (C) DEC 1645> Removable CD-ROM SCSI-2 device
> cd0: 4.237MB/s transfers (4.237MHz, offset 8)
> cd0: cd present [1042004 x 512 byte records]
>
> fatal kernel trap:
>
> trap entry = 0x4 (unaligned access fault)
> cpuid = 0
> faulting va = 0xfffffc00010611c2
> opcode = 0x28
> register = 0x1
> pc = 0xfffffc00004c77dc
> ra = 0xfffffc00004c7a28
> sp = 0xfffffe0007351bb0
> curthread = 0xfffffc0007cff500
> pid = 2, comm = g_event
>
> panic: trap
> cpuid = 0
> Uptime: 11s
> Cannot dump. No dump device defined.
> Automatic reboot in 15 seconds - press a key on the console to abort
> --> Press a key on the console to reboot,
> --> or switch off the system now.
> Rebooting...
Alpha is no longer a "tier-one" platform for FreeBSD, but looking for
experts on it is likely to be your best option; everything looks okay
as far as I can see, up to the point where the unaligned access
occurs. If I recall correctly (I haven't dealt with an Alpha chip in
a while, and there *were* differences from one to another), the
alignment requirements are strictly word-based...
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44mzinzw03.fsf>