Date: Tue, 25 Mar 2003 16:43:06 -0500 From: The Anarcat <anarcat@anarcat.ath.cx> To: current@freebsd.org Subject: LOR at boot Message-ID: <20030325214306.GE717@lenny.anarcat.ath.cx>
next in thread | raw e-mail | index | archive | help
--gDGSpKKIBgtShtf+
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
Content-Transfer-Encoding: quoted-printable
Hello!
I'm running 5.0-RELEASE and this might have already been reported
and/or fixed, but here it goes anyways.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-RELEASE #3: Mon Mar 24 15:39:05 EST 2003
anarcat@lenny.anarcat.ath.cx:/usr/src/sys/i386/compile/LENNII
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0735000.
Preloaded elf module "/boot/kernel/snd_emu10k1.ko" at 0xc07350b4.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc0735164.
Preloaded elf module "/boot/kernel/radeon.ko" at 0xc0735210.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07352bc.
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1008992999 Hz
CPU: AMD Duron(tm) Processor (1008.99-MHz 686-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x670 Stepping =3D 0
Features=3D0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,=
CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=3D0xffffffffc0440000<RSVD,AMIE,DSP,3DNow!>
real memory =3D 1207877632 (1151 MB)
avail memory =3D 1166475264 (1112 MB)
Initializing GEOMetry subsystem
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS A7V-133 > on motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Using $PIR table, 9 entries at 0xc00f1750
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem 0xe6000000-0xe7f=
fffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
drm0: <ATI Radeon QY VE (AGP)> port 0xd800-0xd8ff mem 0xd7000000-0xd700ffff=
,0xd8000000-0xdfffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xe6000000 32MB
info: [drm] Initialized radeon 1.1.1 20010405 on minor 0
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA100 controller> port 0xb800-0xb80f at device 4.1 on=
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 9 at device 4.2 o=
n pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port error, restarting port 1
uhub0: port error, giving up port 1
ugen0: Color FlatbedScanner 22, rev 1.00/1.00, addr 2
uhub0: port error, restarting port 2
uhub0: port error, giving up port 2
uhci1: <VIA 83C572 USB controller> port 0xb000-0xb01f irq 9 at device 4.3 o=
n pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub1: port error, restarting port 1
uhub1: port error, giving up port 1
uhub1: port error, restarting port 2
uhub1: port error, giving up port 2
pci0: <bridge, PCI-unknown> at device 4.4 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0x9400-0x94ff mem 0xd6800000-0=
xd68000ff irq 9 at device 9.0 on pci0
=2E./../../vm/uma_core.c:1330: could sleep with "vr0" locked from ../../../=
pci/if_vr.c:666
vr0: Ethernet address: 00:50:ba:64:e3:6a
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
=2E./../../vm/uma_core.c:1330: could sleep with "vr0" locked from ../../../=
pci/if_vr.c:292
pcm0: <Creative EMU10K1> port 0x9000-0x901f irq 5 at device 10.0 on pci0
atapci1: <Promise ATA100 controller> port 0x7000-0x703f,0x7400-0x7403,0x780=
0-0x7807,0x8000-0x8003,0x8400-0x8407 mem 0xd6000000-0xd601ffff irq 10 at de=
vice 17.0 on pci0
ata2: at 0x8400 on atapci1
ata3: at 0x7800 on atapci1
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x=
3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
orm0: <Option ROMs> at iomem 0xcc000-0xce7ff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
acpi_cpu: CPU throttling enabled, 16 steps from 100% to 6.2%
ad4: 38182MB <MAXTOR 4K040H2> [77578/16/63] at ata2-master UDMA100
MBREXT Slice 5 on ad4s2:
0000 00 01 c1 ff 0b fe ff ff 3f 00 00 00 4d 59 18 02 |........?...MY..|
[0] f:00 typ:11 s(CHS):255/1/193 e(CHS):255/254/255 s:63 l:35150157
0000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PLEXTOR CD-R PX-W4012A 1.01> Removable CD-ROM SCSI-0 device=20
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - t=
ray closed
cd1 at ata1 bus 0 target 0 lun 0
cd1: <LG CD-ROM CRD-8522B 2.02> Removable CD-ROM SCSI-0 device=20
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad4s3a
lock order reversal
1st 0xc674c3f8 process lock (process lock) @ ../../../kern/kern_descrip.c:=
2112
2nd 0xc674b334 filedesc structure (filedesc structure) @ ../../../kern/ker=
n_descrip.c:2119
netsmb_dev: loaded
Thanks!
--=20
Nothing incites to money-crimes like great poverty or great wealth.
- Mark Twain
--gDGSpKKIBgtShtf+
Content-Type: application/pgp-signature
Content-Disposition: inline
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (FreeBSD)
iD8DBQE+gM1pttcWHAnWiGcRAn2jAJ9I9hk4oC4o0cHdtqDyPKai9BKx8gCfSpDD
On5bD21TYPvoeOceoLJ8Nzw=
=NZnn
-----END PGP SIGNATURE-----
--gDGSpKKIBgtShtf+--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20030325214306.GE717>