Date: Thu, 9 Sep 2010 06:13:40 -0700 From: Jeremy Chadwick <freebsd@jdc.parodius.com> To: Gareth de Vaux <bsd@lordcow.org> Cc: stable@freebsd.org Subject: Re: MSIX failure Message-ID: <20100909131340.GA75829@icarus.home.lan> In-Reply-To: <20100909125400.GA18723@lordcow.org> References: <20100906155350.GA50151@lordcow.org> <AANLkTinOxtfJ_BhJape3LDowynx1eOpOW7zCPTime%2BYi@mail.gmail.com> <AANLkTik1WUDxOR2g6TMDx1NrrniJr_qULMJxzVVe90Ur@mail.gmail.com> <AANLkTikdGGgpGhy4MJF_K-ttLvjQOBj%2BAb5r-a2uhJ_Y@mail.gmail.com> <20100908094050.GA73841@lordcow.org> <AANLkTikvd09fw3fUhxsXDhMoWE-kvMoPjXPSTfzYY73T@mail.gmail.com> <20100909125400.GA18723@lordcow.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Sep 09, 2010 at 02:54:01PM +0200, Gareth de Vaux wrote: > On Wed 2010-09-08 (09:41), Jack Vogel wrote: > > This is what'd I'd expect, the onboard is PCH chipset, support was not in > > 8.0, but as I said, in 8.1 (and hence stable/8) it is supported, and it should > > work. > > I've just paid the machine a visit and yes, MSIX fails on the onboard but > the device still works. > > The PCI card however doesn't work, whereas it did when using 8.0-RELEASE. > (There is occasional activity from tcpdump). I'm able to use the onboard > so I can survive, but FYI, the PCI card output: > > kernel: em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port 0x1000-0x103f mem 0xe3120000-0xe313ffff,0xe3100000-0xe311ffff irq 9 at device 1.0 on pci5 > kernel: em1: [FILTER] > kernel: em1: Ethernet address: 00:1b:21:5b:f2:18 > > (no MSIX failure here, or in 8.0-RELEASE) > > $ ifconfig em1 > em1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 > options=209b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,WOL_MAGIC> > ether 00:1b:21:5b:f2:18 > media: Ethernet autoselect > status: no carrier > > pciconf -lv: > > em1@pci0:5:1:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05 hdr=0x00 > vendor = 'Intel Corporation' > device = 'Gigabit Ethernet Controller (Copper) rev 5 (82541PI)' > class = network > subclass = ethernet Can you add the "-c" flag to your pciconf command? Thanks. -- | Jeremy Chadwick jdc@parodius.com | | Parodius Networking http://www.parodius.com/ | | UNIX Systems Administrator Mountain View, CA, USA | | Making life hard for others since 1977. PGP: 4BD6C0CB |
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20100909131340.GA75829>