Date: Thu, 4 Mar 2021 11:33:54 +0100 From: Domagoj =?UTF-8?Q?Smol=C4=8Di=C4=87?= <rank1seeker@gmail.com> To: Adrian Chadd <adrian.chadd@gmail.com> Cc: "freebsd-hackers@freebsd.org" <hackers@freebsd.org>, "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: AR9227/AR9287 unresponsive after some time Message-ID: <20210304113354.00004fa6@gmail.com> In-Reply-To: <CAJ-VmoncTihkskx2y31RyycCe9p=JkAQm2WQ7xC5Jy7Mk1u3PA@mail.gmail.com> References: <20210303112803.0000260f@gmail.com> <CAJ-VmoncTihkskx2y31RyycCe9p=JkAQm2WQ7xC5Jy7Mk1u3PA@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Adrian, Give me a set of your commands to execute and keep running in parallel with= AR9227 running. I'll be frequently sending you a results/dump files. If you agree/have time, of course. PS: 'interrupt read-and-clear bug' affects ALL chips in section 'Known chip= set issues/limitations/bugs' at =3D> https://wiki.freebsd.org/dev/ath_hal%284%29/HardwareSupport Domagoj On Wed, 3 Mar 2021 08:12:05 -0800 Adrian Chadd <adrian.chadd@gmail.com> wrote: > hi! >=20 > Yeah, there's been some long standing calibration issues with the 9227 > that i've never figured out :( >=20 >=20 > -a >=20 > On Wed, 3 Mar 2021 at 02:27, Domagoj Smol=C4=8Di=C4=87 <rank1seeker@gmail= .com> > wrote: > > > > For about 5 years now I have: > > -- > > ath1@pci0:3:2:0: class=3D0x028000 card=3D0x0300168c > > chip=3D0x002d168c rev=3D0x01 hdr=3D0x00 vendor =3D 'Qualcomm Athero= s' > > device =3D 'AR9227 Wireless Network Adapter' > > class =3D network > > -- > > ath1: <Atheros 9227> mem 0xf1040000-0xf104ffff irq 5 at device 2.0 > > on pci3 ath1: [HT] enabling HT modes > > ath1: [HT] enabling short-GI in 20MHz mode > > ath1: [HT] 1 stream STBC receive enabled > > ath1: [HT] 1 stream STBC transmit enabled > > ath1: [HT] 2 RX streams; 2 TX streams > > ath1: AR9227 mac 384.2 RF5133 phy 15.15 > > ath1: 2GHz radio: 0x0000; 5GHz radio: 0x00c0 > > -- > > > > Everything is perfects upon device's fresh config and init. > > There were and always are problems with this card, AFTER some time > > passes. It's like it simply becomes unresponsive. > > > > Now at 12.2-RELEASE-p3 - i386, after some time passes: > > 1) As station/client =3D> in associated state it simply stops > > transmitting packets It can't ping it's AP! > > # service netif restart ..., "fixes" issue. > > 2) As AP =3D> it ignores it's clients and simply stops transmitting > > packets And WORST, slowly but surely freezes whole OS! > > Even console becomes unresponsive and only hard reset helps! > > > > Where should I look at? > > What should I do? > > > > PS: Take a note that SAME setup poses no problem for: > > -- > > ath0@pci0:3:1:0: class=3D0x020000 card=3D0x3a131186 > > chip=3D0x0013168c rev=3D0x01 hdr=3D0x00 vendor =3D 'Qualcomm Athero= s' > > device =3D 'AR5212/5213/2414 Wireless Network Adapter' > > class =3D network > > subclass =3D ethernet > > -- > > > > I saw in section 'Known chipset issues/limitations/bugs': > > interrupt read-and-clear bug > > Has anyone yet found a way to deal with it? > > > > PS: freebsd-wireless@ =3D> I'm not on a mailing list, so keep me > > posted. > > > > > > Thx in advance, > > Domagoj Smol=C4=8Di=C4=87 > > _______________________________________________ > > freebsd-hackers@freebsd.org mailing list > > https://lists.freebsd.org/mailman/listinfo/freebsd-hackers > > To unsubscribe, send any mail to > > "freebsd-hackers-unsubscribe@freebsd.org"=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20210304113354.00004fa6>