Date: Wed, 6 Feb 2013 15:21:39 -0800 From: <dteske@freebsd.org> To: "'Paul Schmehl'" <pauls@utdallas.edu>, "'FreeBSD Questions List'" <freebsd-questions@freebsd.org> Cc: Devin Teske <dteske@freebsd.org> Subject: RE: How to add unused space to an existing install Message-ID: <02d101ce04c0$b8d609f0$2a821dd0$@freebsd.org> In-Reply-To: <47D0E9AD1EEAC6058A534838@utd71538.campus.ad.utdallas.edu> References: <47D0E9AD1EEAC6058A534838@utd71538.campus.ad.utdallas.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
> -----Original Message----- > From: owner-freebsd-questions@freebsd.org [mailto:owner-freebsd- > questions@freebsd.org] On Behalf Of Paul Schmehl > Sent: Wednesday, February 06, 2013 9:59 AM > To: FreeBSD Questions List > Subject: How to add unused space to an existing install > > I have a FreeBSD 8.3 RELEASE box that we recently discovered only has part > of the "disk" being used. This box has four 1TB drives in RAID 5, and df > only shows 500MB of disk available. > > fdisk shows this: > # fdisk -p > # /dev/mfid0 > g c364602 h255 s63 > p 1 0xa5 63 1562363771 > a 1 > > When I run the fdisk editor in sysinstall I see this: > > Disk name: mfid0 FDISK Partition > Editor > DISK Geometry: 364602 cyls/255 heads/63 sectors = 5857331130 sectors > (2860024MB) > > Offset Size(ST) End Name PType Desc Subtype > Flags > > 0 63 62 - 12 unused 0 > 63 1562363771 1562363833 mfid0s1 8 freebsd 165 > 1562363834 4294981702 5857345535 - 12 unused 0 > > I want to capture all that unused space and add it to the server. > > fstab has this: > # cat /etc/fstab > # Device Mountpoint FStype Options Dump > Pass# > /dev/mfid0s1b none swap sw 0 0 > /dev/mfid0s1a / ufs rw 1 1 > /dev/mfid0s1e /home ufs rw 2 2 > /dev/mfid0s1d /tmp ufs rw 2 2 > /dev/mfid0s1f /usr ufs rw 2 2 > /dev/mfid0s1g /var ufs rw 2 2 > /dev/acd0 /cdrom cd9660 ro,noauto 0 0 > > When I try to create a new slice using fdisk, it doesn't seem to work. Did you try something like: echo "p 2 165 * *" | sudo fdisk -f- /dev/mfid0 ?? Afterward "fdisk -p" should show something like... # /dev/mfid0 g c364602 h255 s63 p 1 0xa5 63 1562363771 p 2 0xa5 <num> <num> a 1 And then you'll have /dev/mfid0s2 which you can do-with what you like (directly newfs the slice or create BSD partitions underneath that to further sub-divide into as many as 8 smaller units, /dev/mfid0s2[a-h]). > If I move to the label editor, I get this: > > FreeBSD Disklabel Editor > > Disk: mfid0 Partition name: mfid0s1 Free: 0 blocks (0MB) > > Part Mount Size Newfs Part Mount Size Newfs > ---- ----- ---- ----- ---- ----- ---- ----- > mfid0s1a <none> 2000MB * > mfid0s1d <none> 65536MB * > mfid0s1e <none> 4096MB * > mfid0s1b swap 65536MB SWAP > mfid0s1f <none> 10240MB * > mfid0s1g <none> 601GB * > > As you can see mfid0s1g is 601GB, and according to fstab that's /var. > > Yet df -h shows: > > # df -h > Filesystem Size Used Avail Capacity Mounted on > /dev/mfid0s1a 1.9G 726M 1.0G 41% / > devfs 1.0k 1.0k 0B 100% /dev > /dev/mfid0s1e 3.9G 38M 3.5G 1% /home > /dev/mfid0s1d 62G 6.6M 57G 0% /tmp > /dev/mfid0s1f 9.7G 7.5G 1.4G 84% /usr > /dev/mfid0s1g 582G 39G 496G 7% /var > > So apparently I'm not creating this new slice? It should be /dev/mfid0s1h, > correct? > Let's not confuse slices (DOS partitions) with disklabels (BSD partitions). DOS partitions are (maximum 4 per disk): mfid0s1 mfid0s2 mfid0s3 mfid0s4 (according to your "fdisk -p" output, you're mfid0 disk is currently only using mfid0s1) BSD partitions are (maximum 8 per "slice" aka DOS partition): mfid0s1a mfid0s1b mfid0s1c mfid0s1d mfid0s1e mfid0s1f mfid0s1g mfid0s1h (according to your sysinstall output, you're mfid0s1 slice has 5 BSD partitions -- a, e, d, f, and g) > How to I "recapture" the remaining 2+TB of space that's not being used? > The easiest way to use your extra space is to not adjust one of those 5 BSD partitions, but instead create a new DOS partition (mfid0s2 as previously discussed above). However, if you *really* want to "grow" an existing BSD partition, this can be done (very carefully). First, you'll want to save the output of "disklabel -r mfid0s1" to a text file. Next, you'll have to re-fdisk mfid0 so that the first slice covers the entire disk. Of course, re-mastering the slices does not affect the data, but it _will_ wipe out the BSD partition map (the disklabels; in other words, after using fdisk to adjust the slice size of the first DOS partition, "disklabel -r mfid0s1" will no longer return what it had before -- you'll have no disklabels after), so the previous step of backing up the output of "disklabel -r ..." is paramount. Next, you'll have to restore the disklabel (using "disklabel -e mfid0s1" and cross-referencing your backup text file) with one slight adjustment... You're going to use the *exact* values you backed up _EXCEPT_ you're going to make the last label (position-wise -- taking care to note the byte ranges of each disklabel -- ignoring "c" which of course is a pseudo label for "whole slice") bigger while keeping the same offset (only the size of the last label should change). In your case, given the output you provided from sysinstall, this would likely be your "g" label (but I'd have to see your "disklabel -r" output to know for sure -- again, taking care to analyze the byte ranges). Once you've re-written the disklabels (making sure to change nothing from your previous backup except the size of the last label to cover the new unused space), you're now at a position where you can "grow" the label with: growfs /dev/mfid0s1g NOTE: Should be done from a LiveFS (read: not while booted from said filesystem). That will zero out the unused inodes and make the new space available. Upon your next boot you'll now have the new storage space available to your "g" label (/var from the looks of it). NOTE: If you wanted to change "g" to your "/usr" partition, rsync is your friend -- while booted from a LiveFS like DruidBSD or mfsBSD etc.). -- Cheers, Devin P.S. I take no responsibility for lost data -- caveat emptor. _____________ The information contained in this message is proprietary and/or confidential. If you are not the intended recipient, please: (i) delete the message and all copies; (ii) do not disclose, distribute or use the message in any manner; and (iii) notify the sender immediately. In addition, please be aware that any message addressed to our domain is subject to archiving and review by persons other than the intended recipient. Thank you.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?02d101ce04c0$b8d609f0$2a821dd0$>