Date: Sun, 18 Jan 2009 01:28:22 -0500 From: Joe Marcus Clarke <marcus@marcuscom.com> To: Kevin Oberman <oberman@es.net> Cc: gnome@freebsd.org Subject: Re: Problems with HAL, gnome-mount and removable ATA GELI disk Message-ID: <1232260102.51752.20.camel@shumai.marcuscom.com> In-Reply-To: <20090118042316.5C6D31CC0B@ptavv.es.net>
index | next in thread | previous in thread | raw e-mail
[-- Attachment #1 --]
On Sat, 2009-01-17 at 20:23 -0800, Kevin Oberman wrote:
> I have a problem with hald and a removable ATA disk. This is complicated
> because the fact that the partition is geli encrypted.
>
> I think one issue is that this is not treated as removable. Is the any
> way to make hald treat an ATA disk as removable?
The device's ata_params struct support command1 should indicate that the
device is removable. I'm not sure how else to tell a device is
removable.
>
> But there may be another issue as lshal does not even show the
> partition. It does see the drive, /dev/ad2, the slice, /dev/ad2a1, and
> the encrypted partition, /dev/ad2a1d, but not the decrypted partition,
> /dev/ad2s1d.eli. I assume it should show up.
>
> I have other disks (USB) where the slice is encrypted and it works just
> fine (/dev/da0s1.elid), so maybe it's the fixed disk issue.
>
> Here is the lshal output for that disk:
> udi = '/org/freedesktop/Hal/devices/storage_serial_WD_WXC606029004'
> block.device = '/dev/ad2' (string)
> block.is_volume = false (bool)
> block.major = 0 (0x0) (int)
> block.minor = 88 (0x58) (int)
> block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WD_WXC606029004' (string)
> freebsd.device_file = '/dev/ad2' (string)
> freebsd.driver = 'ad' (string)
> freebsd.unit = 2 (0x2) (int)
> info.capabilities = {'block', 'storage'} (string list)
> info.category = 'storage' (string)
> info.parent = '/org/freedesktop/Hal/devices/ide_1_0' (string)
> info.product = 'WDC WD1200UE-00KVT0' (string)
> info.subsystem = 'block' (string)
> info.udi = '/org/freedesktop/Hal/devices/storage_serial_WD_WXC606029004' (string)
> info.vendor = 'WDC' (string)
> storage.automount_enabled_hint = true (bool)
> storage.bus = 'ide' (string)
> storage.drive_type = 'disk' (string)
> storage.firmware_revision = '01.03K01' (string)
> storage.hotpluggable = false (bool)
> storage.media_check_enabled = false (bool)
> storage.model = 'WDC WD1200UE-00KVT0' (string)
> storage.no_partitions_hint = false (bool)
> storage.originating_device = '/org/freedesktop/Hal/devices/ide_1_0' (string)
> storage.removable = false (bool)
> storage.removable.support_async_notification = false (bool)
> storage.requires_eject = false (bool)
> storage.serial = 'WD-WXC606029004' (string)
> storage.vendor = 'WDC' (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_part1_size_120031478784'
> block.device = '/dev/ad2s1' (string)
> block.is_volume = true (bool)
> block.major = 0 (0x0) (int)
> block.minor = 97 (0x61) (int)
> block.storage_device = '/org/freedesktop/Hal/devices/storage_serial_WD_WXC606029004' (string)
> info.capabilities = {'block', 'volume'} (string list)
> info.category = 'volume' (string)
> info.parent = '/org/freedesktop/Hal/devices/storage_serial_WD_WXC606029004' (string)
> info.product = 'Volume' (string)
> info.subsystem = 'block' (string)
> info.udi = '/org/freedesktop/Hal/devices/volume_part1_size_120031478784' (string)
> volume.block_size = 512 (0x200) (uint64)
> volume.fstype = '' (string)
> volume.fsusage = 'partitiontable' (string)
> volume.ignore = true (bool)
> volume.is_disc = false (bool)
> volume.is_mounted = false (bool)
> volume.is_mounted_read_only = false (bool)
> volume.is_partition = true (bool)
> volume.label = '' (string)
> volume.mount_point = '' (string)
> volume.num_blocks = 234436482 (0xdf93782) (uint64)
> volume.partition.media_size = 120031478784 (0x1bf26f0400) (uint64)
> volume.partition.number = 1 (0x1) (int)
> volume.partition.scheme = 'mbr' (string)
> volume.partition.start = 32256 (0x7e00) (uint64)
> volume.partition.type = '0xa5' (string)
> volume.size = 120031478784 (0x1bf26f0400) (uint64)
> volume.uuid = '' (string)
>
> udi = '/org/freedesktop/Hal/devices/temp/192'
> block.device = '/dev/ad2s1d' (string)
> block.major = 0 (0x0) (int)
> block.minor = 99 (0x63) (int)
> info.ignore = true (bool)
> info.parent = '/org/freedesktop/Hal/devices/volume_part1_size_120031478784' (string)
> info.product = 'Ignored Device' (string)
> info.subsystem = 'block' (string)
> info.udi = '/org/freedesktop/Hal/devices/ignored-device' (string)
>
> Any suggestions for making the drive automount?
Have you defined any hal FDI files that might be ignoring this device?
I don't see where else it would be ignored.
Joe
--
PGP Key : http://www.marcuscom.com/pgp.asc
[-- Attachment #2 --]
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (FreeBSD)
iEYEABECAAYFAklyzAUACgkQb2iPiv4Uz4eVZQCcC4VKd6Z0G/bL4yUCQNqGSgcF
gZkAoIeRVXoOMIHsSqBbgVkMEHI0GkSz
=hYhX
-----END PGP SIGNATURE-----
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1232260102.51752.20.camel>