Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 24 Sep 2012 09:20:28 -0700
From:      "Rudy (bulk)" <crapsh@monkeybrains.net>
To:        freebsd-net <freebsd-net@freebsd.org>
Subject:   ping: sendto: No buffer space available
Message-ID:  <5060884C.3050709@monkeybrains.net>

next in thread | raw e-mail | index | archive | help

Sometimes when I try to ping a neighbor machine (plugged directly in 
with no switch involved), I get:

ping: sendto: No buffer space available
ping: sendto: No buffer space available

If I reset the interface  'ifconfig em1 down; ifconfig em1 up' the 
problem goes away.

The pings are:
  FreeBSD 8.3  em1   --> FreeBSD 9.0  em2
and I am seeing the issue on the FreeBSD 8.3 machine.  The box has 6GB 
of free ram and is a quagga router.

What do I need to tune?

Thanks!

Rudy




# netstat -m
10236/8454/18690 mbufs in use (current/cache/total)
10234/5388/15622/262144 mbuf clusters in use (current/cache/total/max)
10234/5382 mbuf+clusters out of packet secondary zone in use (current/cache)
0/327/327/12800 4k (page size) jumbo clusters in use 
(current/cache/total/max)
0/3070/3070/6400 9k jumbo clusters in use (current/cache/total/max)
0/0/0/3200 16k jumbo clusters in use (current/cache/total/max)
23027K/41827K/64854K bytes allocated to network (current/cache/total)
0/0/0 requests for mbufs denied (mbufs/clusters/mbuf+clusters)
0/0/0 requests for jumbo clusters denied (4k/9k/16k)
0/0/0 sfbufs in use (current/peak/max)
0 requests for sfbufs denied
0 requests for sfbufs delayed
0 requests for I/O initiated by sendfile
0 calls to protocol drain routines

# ifconfig em1
em1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=4219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC,VLAN_HWTSO>
         ether 00:25:90:56:60:7f
         inet 10.1.1.1 netmask 0xfffffffc broadcast 10.1.1.3
         media: Ethernet autoselect (1000baseT <full-duplex>)
         status: active



FreeBSD 8.3
### loader.conf:
net.link.ifqmaxlen=1024
hw.em.rxd=1024
hw.em.txd=1024


### sysctl.conf:
kern.timecounter.hardware=HPET

net.route.netisr_maxqlen=2048
net.inet.ip.intr_queue_maxlen=1024

kern.ipc.somaxconn=256
kern.random.sys.harvest.interrupt=0
kern.random.sys.harvest.ethernet=0

net.inet.raw.maxdgram=16384
net.inet.raw.recvspace=16384

net.inet.icmp.icmplim=1000
net.inet.ip.fastforwarding=1
kern.ipc.nmbclusters=262144
net.inet.icmp.drop_redirect=1

dev.em.0.rx_processing_limit=200
dev.em.1.rx_processing_limit=200
dev.em.2.rx_processing_limit=200
dev.em.3.rx_processing_limit=200

net.link.ether.inet.max_age=300
hw.intr_storm_threshold=9000

# Security
net.inet.ip.redirect=0
net.inet.ip.sourceroute=0
net.inet.ip.accept_sourceroute=0
net.inet.icmp.maskrepl=0




Not sure if it matters, but here are the tunings on the other box:

FreeBSD 9.0
### loader.conf:
net.link.ifqmaxlen="512"

### sysctl.conf:
net.inet.ip.fastforwarding=1
kern.ipc.nmbclusters=262144
kern.timecounter.hardware=HPET
net.inet.ip.rtminexpire=2
net.inet.ip.rtmaxcache=1024


dev.igb.0.rx_processing_limit=480
dev.igb.1.rx_processing_limit=480

net.inet.icmp.icmplim=1000
kern.random.sys.harvest.interrupt=0
kern.random.sys.harvest.ethernet=0

net.link.ether.inet.max_age=300

##Sat Apr 21 00:06:48 PDT 2012
net.inet.ip.redirect=0
net.route.netisr_maxqlen=2048



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5060884C.3050709>