Date: Thu, 19 Jan 2017 15:14:18 -0800 From: Mark Millard <markmi@dsl-only.net> To: Roman Divacky <rdivacky@vlakno.cz> Cc: FreeBSD Toolchain <freebsd-toolchain@freebsd.org> Subject: Re: /usr/bin/ld.lld on powerpc64: produces a.out for which: ld-elf.so.1: assert failed: /usr/src/libexec/rtld-elf/powerpc64/reloc.c:374 Message-ID: <41DE5AA2-5794-4BE6-8BDD-C3C7C84F9C83@dsl-only.net> In-Reply-To: <20170119200530.GA58089@vlakno.cz> References: <27422F1B-6906-4D37-860A-D1BC8DC83BBF@dsl-only.net> <20170117195424.GA89237@vlakno.cz> <237EB920-0795-4B18-94D4-2EAC0FC76F01@dsl-only.net> <20170117215613.GA95258@vlakno.cz> <45D0BB1C-490A-4809-BAB1-F4E552FECEDD@dsl-only.net> <20170118215420.GA65399@vlakno.cz> <9023794B-0999-4F50-95DE-2D4156BC6E75@dsl-only.net> <DDC0F517-C606-402C-80D0-BE3C941D97CB@dsl-only.net> <545CE5A1-9E7F-46C0-8355-0C32B60D1C72@dsl-only.net> <278EB6CA-6A04-43D6-A9F2-84FF11A367C7@dsl-only.net> <20170119200530.GA58089@vlakno.cz>
next in thread | previous in thread | raw e-mail | index | archive | help
On 2017-Jan-19, at 12:05 PM, Roman Divacky <rdivacky at vlakno.cz> =
wrote:
> Type =3D 38 should be R_ABS so thats fine. If what I expected to be in =
.got
> is in .got.plt, what happens if you modify the getPPC64TocBase() to
> use ::GotPlt instead of ::Got ?
For using GotPlt. . .
-pie use still gets the notices:
can't create dynamic relocation R_PPC64_REL24 against readonly segment
The log messages do not change at all for GotPlt being in use: Plt, Got,
and GotPlt all output the same messages during the compile/link based
on ld.lld (other options being the same). (I diff'd the outputs.)
# /usr/local/bin/gdb a.out
GNU gdb (GDB) 7.11.1 [GDB v7.11.1 for FreeBSD]
. . .
Reading symbols from a.out...done.
(gdb) run
Starting program: /root/c_tests/a.out=20
Program received signal SIGSEGV, Segmentation fault.
0x00000000100104a0 in .__do_global_ctors_aux ()
(gdb) bt
#0 0x00000000100104a0 in .__do_global_ctors_aux ()
#1 0x0000000010010508 in ._init ()
#2 0x000000005002ad1c in objlist_call_init (list=3D<optimized out>, =
lockstate=3D<optimized out>) at /usr/src/libexec/rtld-elf/rtld.c:2546
#3 0x0000000050029fe4 in _rtld (sp=3D<optimized out>, =
exit_proc=3D<optimized out>, objp=3D<optimized out>) at =
/usr/src/libexec/rtld-elf/rtld.c:673
#4 0x00000000500279b0 in ._rtld_start () at =
/usr/src/libexec/rtld-elf/powerpc64/rtld_start.S:83
Backtrace stopped: frame did not save the PC
In other words: the same as when Plt was used.
And the code does not get near executing main.
The difference in:
/usr/local/powerpc64-freebsd/bin/objdump -d --prefix-addresses a.out
output for Got vs. GotPlt is:
(<: Got, >: GotPlt)
< 0000000010010558 <.plt+0x8> ld r12,32512(r11)
---
> 0000000010010558 <.plt+0x8> ld r12,-32744(r11)
346c346
< 0000000010010578 <.plt+0x28> ld r12,32520(r11)
---
> 0000000010010578 <.plt+0x28> ld r12,-32736(r11)
354c354
< 0000000010010598 <.plt+0x48> ld r12,32528(r11)
---
> 0000000010010598 <.plt+0x48> ld r12,-32728(r11)
The GotPlt offset figures look better to me: near the beginning
of the 64K range with zero offset being near the middle. (That
does not of itself imply that r11 would be appropriate for the
figures if the execution got this far.)
Of course the .plt section is far before what you call
the TOC, unlike in what the bfd linker does. (See below.)
The following includes:
0x0000000010010550 - 0x00000000100105b0 is .plt
. . .
0x0000000010030020 - 0x0000000010030050 is .got.plt
0x0000000010030050 - 0x00000000100300a0 is .toc
. . .
0x000000005005ff00 - 0x000000005005ff08 is .got in =
/libexec/ld-elf.so.1
. . .
0x000000005026f900 - 0x0000000050271f98 is .got in =
/lib/libc.so.7
0x0000000050272000 - 0x0000000050277208 is .plt in =
/lib/libc.so.7
(A mix of ld.lld and ld.bfd styles.)
(gdb) info file
Symbols from "/root/c_tests/a.out".
Native process:
Using the running image of child LWP 100168 of process 78109.
While running this, GDB does not access memory from...
Local exec file:
`/root/c_tests/a.out', file type elf64-powerpc-freebsd.
Entry point: 0x100300a0
0x0000000010000270 - 0x0000000010000285 is .interp
0x0000000010000288 - 0x00000000100002b8 is .note.tag
0x00000000100002b8 - 0x00000000100002b9 is .rodata
0x00000000100002bc - 0x00000000100002bc is .eh_frame
0x00000000100002c0 - 0x0000000010000368 is .dynsym
0x0000000010000368 - 0x0000000010000376 is .gnu.version
0x0000000010000378 - 0x0000000010000398 is .gnu.version_r
0x0000000010000398 - 0x00000000100003d8 is .hash
0x00000000100003d8 - 0x000000001000041a is .dynstr
0x0000000010000420 - 0x0000000010000468 is .rela.plt
0x0000000010000468 - 0x0000000010000474 is .eh_frame_hdr
0x0000000010010000 - 0x00000000100104f0 is .text
0x00000000100104f0 - 0x000000001001051c is .init
0x0000000010010520 - 0x0000000010010544 is .fini
0x0000000010010550 - 0x00000000100105b0 is .plt
0x0000000010020000 - 0x0000000010020010 is .ctors
0x0000000010020010 - 0x0000000010020020 is .dtors
0x0000000010020020 - 0x0000000010020028 is .jcr
0x0000000010020028 - 0x0000000010020138 is .dynamic
0x0000000010020138 - 0x0000000010020138 is .got
0x0000000010030000 - 0x0000000010030019 is .data
0x0000000010030020 - 0x0000000010030050 is .got.plt
0x0000000010030050 - 0x00000000100300a0 is .toc
0x00000000100300a0 - 0x0000000010030160 is .opd
0x0000000010030160 - 0x0000000010030170 is .bss
0x0000000050020158 - 0x0000000050020228 is .hash in =
/libexec/ld-elf.so.1
0x0000000050020228 - 0x0000000050020540 is .dynsym in =
/libexec/ld-elf.so.1
0x0000000050020540 - 0x00000000500206b6 is .dynstr in =
/libexec/ld-elf.so.1
0x00000000500206b6 - 0x00000000500206f8 is .gnu.version in =
/libexec/ld-elf.so.1
0x00000000500206f8 - 0x0000000050020808 is .gnu.version_d in =
/libexec/ld-elf.so.1
0x0000000050020808 - 0x0000000050027960 is .rela.dyn in =
/libexec/ld-elf.so.1
0x0000000050027960 - 0x0000000050045ab4 is .text in =
/libexec/ld-elf.so.1
0x0000000050045ab4 - 0x000000005004856b is .rodata in =
/libexec/ld-elf.so.1
0x000000005004856c - 0x000000005004856c is .eh_frame in =
/libexec/ld-elf.so.1
0x000000005005cf50 - 0x000000005005cf58 is .fini_array in =
/libexec/ld-elf.so.1
0x000000005005cf58 - 0x000000005005d260 is .data.rel.ro in =
/libexec/ld-elf.so.1
0x000000005005d260 - 0x000000005005d3b0 is .dynamic in =
/libexec/ld-elf.so.1
0x000000005005d3b0 - 0x000000005005ff00 is .opd in =
/libexec/ld-elf.so.1
0x000000005005ff00 - 0x000000005005ff08 is .got in =
/libexec/ld-elf.so.1
0x0000000050060000 - 0x0000000050060628 is .data in =
/libexec/ld-elf.so.1
0x0000000050060628 - 0x0000000050061478 is .bss in =
/libexec/ld-elf.so.1
0x00000000500621c8 - 0x00000000500672b0 is .hash in =
/lib/libc.so.7
0x00000000500672b0 - 0x0000000050079778 is .dynsym in =
/lib/libc.so.7
0x0000000050079778 - 0x0000000050080846 is .dynstr in =
/lib/libc.so.7
0x0000000050080846 - 0x00000000500820ac is .gnu.version in =
/lib/libc.so.7
0x00000000500820b0 - 0x00000000500821c0 is .gnu.version_d in =
/lib/libc.so.7
0x00000000500821c0 - 0x00000000500c2678 is .rela.dyn in =
/lib/libc.so.7
0x00000000500c2678 - 0x00000000500c7868 is .rela.plt in =
/lib/libc.so.7
0x00000000500c7870 - 0x00000000500c789c is .init in =
/lib/libc.so.7
0x00000000500c78a0 - 0x0000000050227ca0 is .text in =
/lib/libc.so.7
0x0000000050227ca0 - 0x0000000050227cc4 is .fini in =
/lib/libc.so.7
0x0000000050227d00 - 0x000000005023b606 is .rodata in =
/lib/libc.so.7
0x000000005023b608 - 0x000000005023b6ec is .eh_frame_hdr in =
/lib/libc.so.7
0x000000005023b6f0 - 0x000000005023bad4 is .eh_frame in =
/lib/libc.so.7
0x0000000050253318 - 0x0000000050253380 is .tdata in =
/lib/libc.so.7
0x0000000050253380 - 0x0000000050253390 is .tbss in =
/lib/libc.so.7
0x0000000050253380 - 0x0000000050253390 is .init_array in =
/lib/libc.so.7
0x0000000050253390 - 0x0000000050253398 is .fini_array in =
/lib/libc.so.7
0x0000000050253398 - 0x00000000502533a8 is .ctors in =
/lib/libc.so.7
0x00000000502533a8 - 0x00000000502533b8 is .dtors in =
/lib/libc.so.7
0x00000000502533b8 - 0x00000000502533c0 is .jcr in =
/lib/libc.so.7
0x00000000502533c0 - 0x0000000050258a90 is .data.rel.ro in =
/lib/libc.so.7
0x0000000050258a90 - 0x0000000050258c60 is .dynamic in =
/lib/libc.so.7
0x0000000050258c60 - 0x000000005026f8f8 is .opd in =
/lib/libc.so.7
0x000000005026f900 - 0x0000000050271f98 is .got in =
/lib/libc.so.7
0x0000000050272000 - 0x0000000050277208 is .plt in =
/lib/libc.so.7
0x0000000050277208 - 0x000000005027b0b0 is .data in =
/lib/libc.so.7
0x000000005027b0b0 - 0x0000000050294738 is .bss in =
/lib/libc.so.7
=3D=3D=3D
Mark Millard
markmi at dsl-only.net
On Thu, Jan 19, 2017 at 01:46:02AM -0800, Mark Millard wrote:
> I should have noted that -pie gets the same sort of
> readonly segment errors as -shared did:
>=20
> # clang -fuse-ld=3Dlld -g -pie empty_src.c
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 10
> Type =3D 10
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 10
> Type =3D 50
> Type =3D 50
> Type =3D 48
> Type =3D 48
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 50
> Type =3D 48
> Type =3D 48
> Type =3D 50
> Type =3D 50
> Type =3D 48
> Type =3D 48
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 50
> Type =3D 48
> Type =3D 48
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 10
> Type =3D 50
> Type =3D 50
> Type =3D 48
> Type =3D 48
> Type =3D 50
> Type =3D 50
> Type =3D 48
> Type =3D 48
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 10
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 48
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> undefined symbol: main in /usr/lib/Scrt1.o
> clang: error: linker command failed with exit code 1 (use -v to see =
invocation)
>=20
> # more main.c
> int main ()
> {
> }
> # clang -fuse-ld=3Dlld -g -pie main.c
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 10
> Type =3D 10
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 10
> Type =3D 50
> Type =3D 50
> Type =3D 48
> Type =3D 48
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 50
> Type =3D 48
> Type =3D 48
> Type =3D 50
> Type =3D 50
> Type =3D 48
> Type =3D 48
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 50
> Type =3D 48
> Type =3D 48
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 10
> Type =3D 50
> Type =3D 50
> Type =3D 48
> Type =3D 48
> Type =3D 50
> Type =3D 50
> Type =3D 48
> Type =3D 48
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 10
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 48
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> clang: error: linker command failed with exit code 1 (use -v to see =
invocation)
>=20
>=20
> So making something with a relocatable global variable is =
problematical
> via lld.
>=20
> =3D=3D=3D
> Mark Millard
> markmi at dsl-only.net
>=20
> On 2017-Jan-18, at 10:48 PM, Mark Millard <markmi at dsl-only.net> =
wrote:
>=20
> The log messages code does not work because of Assertion failures:
>=20
> # clang -fuse-ld=3Dlld -g main.c
> Type =3D 50, name =3D Assertion failed: (!isLocal()), function =
getName, file /usr/src/contrib/llvm/tools/lld/ELF/Symbols.cpp, line 100.
> clang: error: unable to execute command: Abort trap (core dumped)
> clang: error: linker command failed due to signal (use -v to see =
invocation)
>=20
> So for now I've disabled the name part of the line. At least we will
> see the numeric type of each and the reports of any "unhandled" =
values.
>=20
> I decided to use the Got variation instead of the Plt variant first.
>=20
> Some examples:
>=20
> # more empty_src.c
>=20
> # clang -fuse-ld=3Dlld -g -shared -o empty_src.so empty_src.c
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 10
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 48
> Type =3D 10
> can't create dynamic relocation R_PPC64_REL24 against readonly segment
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> clang: error: linker command failed with exit code 1 (use -v to see =
invocation)
>=20
> # clang -fuse-ld=3Dlld -g empty_src.c
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 10
> Type =3D 10
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 10
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 10
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 10
> Type =3D 10
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 10
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 10
> Type =3D 10
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 48
> Type =3D 10
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> undefined symbol: main in /usr/lib/crt1.o
> clang: error: linker command failed with exit code 1 (use -v to see =
invocation)
>=20
> # more main.c
> volatile void* gblvar =3D 0;
>=20
> int main ()
> {
> gblvar =3D &gblvar;
> }
>=20
> # clang -fuse-ld=3Dlld -g main.c
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 10
> Type =3D 10
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 10
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 10
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 10
> Type =3D 10
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 10
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 10
> Type =3D 10
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 50
> Type =3D 48
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 48
> Type =3D 10
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
>=20
> # more main.c
> int main ()
> {
> }
>=20
> # clang -fuse-ld=3Dlld -g main.c
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 10
> Type =3D 10
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 10
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 10
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 10
> Type =3D 10
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 10
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 64
> Type =3D 50
> Type =3D 48
> Type =3D 10
> Type =3D 10
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 50
> Type =3D 48
> Type =3D 50
> Type =3D 48
> Type =3D 10
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 51
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 1
> Unhandled type =3D 1
> Type =3D 38
> Unhandled type =3D 38
> Type =3D 38
> Unhandled type =3D 38
>=20
>=20
> =3D=3D=3D
> Mark Millard
> markmi at dsl-only.net
>=20
> On 2017-Jan-18, at 3:41 PM, Mark Millard <markmi@dsl-only.net> wrote:
>=20
> On 2017-Jan-18, at 1:54 PM, Roman Divacky <rdivacky@vlakno.cz> wrote:
>=20
>> I think I got it all wrong. I think what lld is trying to achieve
>> is to have the PLT entry to jump to GOT which references the real =
symbol.
>=20
> =46rom what I've read: for code references the .got.plt section would
> be involved when it exists, not the .got section.
>=20
>> For some reason, GOT is empty, in our case.
>=20
> I think that I've already explained this: lld produces two different
> sections instead of just one .got section: .got and .got.plt .
>=20
> .got is now for only global variables. (These can be in the
> RELRO region: read-only after upfront relocation.) My program
> had no global variables. If you want I can change it to have one
> and use it so that the .got will not be empty.
>=20
> .got.plt is for code references that allow lazy relocation.
> (These can not being the the RELRO region.) Having the global
> variable would not change this from what I can tell.
>=20
> In the older toolchain these were both in the .got section and
> the global variable relocations could not be in the RELRO region
> because of the mixing in one section.
>=20
>> I believe this might be caused
>> by a relocation thats wrongly mapped to R_ABS in =
PPC64TargetInfo::getRelExpr().
>=20
> That is not it from what I can tell reading about what the .got.plt
> section is for and why it was split from the .got section.
>=20
> I think I'll add a global variable and use it so that their is no
> question what goes in the .got section instead of having no examples.
>=20
> I think you are not going in the right direction now for what the
> .got section is for as lld is producing things for powerpc64 (not
> that I'm an expert in the older or newer techniques).
>=20
>> Mark, can you apply this patch and rerun the linking and send me back =
what
>> relocations are applied to what symbols? Or even, if there's an =
unhandled
>> relocation, try to adjust the switch and rerun your test?=20
>=20
> I think that I will first add the global variable and its use
> and show what the last change with Plt instead of Got ends
> up looking like --but with your log notices added.
>=20
> Then I'll retry with the Plt use reverted.
>=20
>> Thanks
>>=20
>> Index: ../tools/lld/ELF/Target.cpp
>> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>> --- ../tools/lld/ELF/Target.cpp (revision 292428)
>> +++ ../tools/lld/ELF/Target.cpp (working copy)
>> @@ -1075,7 +1075,8 @@
>> }
>>=20
>> PPC64TargetInfo::PPC64TargetInfo() {
>> - PltRel =3D GotRel =3D R_PPC64_GLOB_DAT;
>> + GotRel =3D R_PPC64_GLOB_DAT;
>> + PltRel =3D R_PPC64_JMP_SLOT;
>> RelativeRel =3D R_PPC64_RELATIVE;
>> GotEntrySize =3D 8;
>> GotPltEntrySize =3D 8;
>> @@ -1114,8 +1115,10 @@
>> }
>>=20
>> RelExpr PPC64TargetInfo::getRelExpr(uint32_t Type, const SymbolBody =
&S) const {
>> + llvm::outs() << "Type =3D " << Type << ", name =3D " << =
S.getName() << "\n";
>> switch (Type) {
>> default:
>> + llvm::outs() << "Unhandled type =3D " << Type << "\n";
>> return R_ABS;
>> case R_PPC64_TOC16:
>> case R_PPC64_TOC16_DS:
>=20
> It may be a bit before I get the Plt and/or Got examples done.
> I might report the Plt case first and separately, later report
> the Got case.
>=20
> =3D=3D=3D
> Mark Millard
> markmi at dsl-only.net
>=20
> On Tue, Jan 17, 2017 at 09:38:07PM -0800, Mark Millard wrote:
>> Using the new changed line (Plt use now):
>>=20
>> uint64_t TocVA =3D Out<ELF64BE>::Plt->getVA();
>>=20
>> changed the behavior and it gets farther for
>> -fuse-ld=3Dlld based linking. But it is r2 leading
>> to r3 content that is dereferenced and 8(r3) fails
>> this time. This was in the process of finding
>> the new r2 value for the following bctrl.
>> r2=3D=3D0x10018560 initially in __do_global_ctors_aux
>> seems wrong. If so then objlist_call_init produced
>> a wrong r2 value.
>>=20
>> [I've no clue if this is what you expected from
>> the Plt experiment or not.]
>>=20
>> Details. . .
>>=20
>> # /usr/local/bin/gdb a.out
>> GNU gdb (GDB) 7.11.1 [GDB v7.11.1 for FreeBSD]
>> . . .
>> Reading symbols from a.out...done.
>> (gdb) run
>> Starting program: /root/c_tests/a.out=20
>>=20
>> Program received signal SIGSEGV, Segmentation fault.
>> 0x00000000100104a8 in .__do_global_ctors_aux ()
>> (gdb) bt
>> #0 0x00000000100104a8 in .__do_global_ctors_aux ()
>> #1 0x0000000010010518 in ._init ()
>> #2 0x000000005002ac78 in objlist_call_init (list=3D<optimized out>, =
lockstate=3D<optimized out>) at /usr/src/libexec/rtld-elf/rtld.c:2541
>> #3 0x0000000050029fa8 in _rtld (sp=3D<optimized out>, =
exit_proc=3D<optimized out>, objp=3D<optimized out>) at =
/usr/src/libexec/rtld-elf/rtld.c:668
>> #4 0x00000000500279b0 in ._rtld_start () at =
/usr/src/libexec/rtld-elf/powerpc64/rtld_start.S:83
>> Backtrace stopped: frame did not save the PC
>> (gdb) disass
>> Dump of assembler code for function .__do_global_ctors_aux:
>> 0x0000000010010470 <+0>: mflr r0
>> 0x0000000010010474 <+4>: std r31,-8(r1)
>> 0x0000000010010478 <+8>: std r0,16(r1)
>> 0x000000001001047c <+12>: stdu r1,-128(r1)
>> 0x0000000010010480 <+16>: addis r3,r2,-1 <<<<<=3D=3D=3D=3D =
Note: r3 derives from r2
>> 0x0000000010010484 <+20>: mr r31,r1
>> 0x0000000010010488 <+24>: addi r3,r3,32464
>> 0x000000001001048c <+28>: std r30,112(r31)
>> 0x0000000010010490 <+32>: ld r3,-8(r3)
>> 0x0000000010010494 <+36>: cmpdi r3,-1
>> 0x0000000010010498 <+40>: beq 0x100104d4 =
<.__do_global_ctors_aux+100>
>> 0x000000001001049c <+44>: addis r4,r2,-1
>> 0x00000000100104a0 <+48>: addi r4,r4,32464
>> 0x00000000100104a4 <+52>: addi r30,r4,-8
>> =3D> 0x00000000100104a8 <+56>: ld r4,8(r3) <<<<<=3D=3D=3D=
=3D Note: 8(r3) fails.
>> 0x00000000100104ac <+60>: ld r11,16(r3)
>> 0x00000000100104b0 <+64>: ld r3,0(r3)
>> 0x00000000100104b4 <+68>: std r2,40(r1)
>> 0x00000000100104b8 <+72>: mr r2,r4 <<<<<=3D=3D=3D=3D =
Note: 8(r3) result should have been the new r2 value
>> 0x00000000100104bc <+76>: mtctr r3
>> 0x00000000100104c0 <+80>: bctrl
>> 0x00000000100104c4 <+84>: ld r2,40(r1)
>> 0x00000000100104c8 <+88>: ldu r3,-8(r30)
>> 0x00000000100104cc <+92>: cmpdi r3,-1
>> 0x00000000100104d0 <+96>: bne 0x100104a8 =
<.__do_global_ctors_aux+56>
>> 0x00000000100104d4 <+100>: ld r30,112(r31)
>> 0x00000000100104d8 <+104>: addi r1,r1,128
>> 0x00000000100104dc <+108>: ld r0,16(r1)
>> 0x00000000100104e0 <+112>: ld r31,-8(r1)
>> 0x00000000100104e4 <+116>: mtlr r0
>> 0x00000000100104e8 <+120>: blr
>> 0x00000000100104ec <+124>: .long 0x0
>> 0x00000000100104f0 <+128>: .long 0x0
>> 0x00000000100104f4 <+132>: .long 0x0
>> End of assembler dump.
>> (gdb) info registers
>> r0 0x10010518 268502296
>> r1 0xffffffffffffcbf0 18446744073709538288
>> r2 0x10018560 268535136
>> r3 0x7ca903a64e800421 8982714944583631905
>> r4 0x10010430 268502064
>> r5 0x100300d0 268632272
>> r6 0x50043ab0 1342454448
>> r7 0x50067f00 1342603008
>> r8 0xffffffffffffdfcc 18446744073709543372
>> r9 0x0 0
>> r10 0x0 0
>> r11 0x0 0
>> r12 0xffffffffffffdfd0 18446744073709543376
>> r13 0x50057010 1342533648
>> r14 0x0 0
>> r15 0x0 0
>> r16 0x50047f00 1342471936
>> r17 0x500613e0 1342575584
>> r18 0x50253388 1344615304
>> r19 0x2 2
>> r20 0x0 0
>> r21 0x9 9
>> r22 0x0 0
>> r23 0x40000000000000 18014398509481984
>> r24 0x5004a100 1342480640
>> r25 0x5004c400 1342489600
>> r26 0xffffffffffffcd18 18446744073709538584
>> r27 0xffffffffffffcd3c 18446744073709538620
>> r28 0xffffffffffffcd3c 18446744073709538620
>> r29 0x0 0
>> r30 0x10010428 268502056
>> r31 0xffffffffffffcbf0 18446744073709538288
>> pc 0x100104a8 0x100104a8 <.__do_global_ctors_aux+56>
>> msr <unavailable>
>> cr 0x48200c00 1210059776
>> lr 0x10010518 0x10010518 <._init+24>
>> ctr 0x10010500 268502272
>> xer 0x20000000 536870912
>> (gdb) info file
>> Symbols from "/root/c_tests/a.out".
>> Native process:
>> Using the running image of child LWP 100093 of process 1091.
>> While running this, GDB does not access memory from...
>> Local exec file:
>> `/root/c_tests/a.out', file type elf64-powerpc-freebsd.
>> Entry point: 0x100300a0
>> 0x0000000010000270 - 0x0000000010000285 is .interp
>> 0x0000000010000288 - 0x00000000100002b8 is .note.tag
>> 0x00000000100002b8 - 0x00000000100002b9 is .rodata
>> 0x00000000100002bc - 0x00000000100002bc is .eh_frame
>> 0x00000000100002c0 - 0x0000000010000368 is .dynsym
>> 0x0000000010000368 - 0x0000000010000376 is .gnu.version
>> 0x0000000010000378 - 0x0000000010000398 is .gnu.version_r
>> 0x0000000010000398 - 0x00000000100003d8 is .hash
>> 0x00000000100003d8 - 0x000000001000041a is .dynstr
>> 0x0000000010000420 - 0x0000000010000468 is .rela.plt
>> 0x0000000010000468 - 0x0000000010000474 is .eh_frame_hdr
>> 0x0000000010010000 - 0x00000000100104f8 is .text
>> 0x0000000010010500 - 0x000000001001052c is .init
>> 0x0000000010010530 - 0x0000000010010554 is .fini
>> 0x0000000010010560 - 0x00000000100105c0 is .plt
>> 0x0000000010020000 - 0x0000000010020010 is .ctors
>> 0x0000000010020010 - 0x0000000010020020 is .dtors
>> 0x0000000010020020 - 0x0000000010020028 is .jcr
>> 0x0000000010020028 - 0x0000000010020138 is .dynamic
>> 0x0000000010020138 - 0x0000000010020138 is .got
>> 0x0000000010030000 - 0x0000000010030019 is .data
>> 0x0000000010030020 - 0x0000000010030050 is .got.plt
>> 0x0000000010030050 - 0x00000000100300a0 is .toc
>> 0x00000000100300a0 - 0x0000000010030160 is .opd
>> 0x0000000010030160 - 0x0000000010030170 is .bss
>> 0x0000000050020158 - 0x0000000050020228 is .hash in =
/libexec/ld-elf.so.1
>> 0x0000000050020228 - 0x0000000050020540 is .dynsym in =
/libexec/ld-elf.so.1
>> 0x0000000050020540 - 0x00000000500206b6 is .dynstr in =
/libexec/ld-elf.so.1
>> 0x00000000500206b6 - 0x00000000500206f8 is .gnu.version in =
/libexec/ld-elf.so.1
>> 0x00000000500206f8 - 0x0000000050020808 is .gnu.version_d in =
/libexec/ld-elf.so.1
>> 0x0000000050020808 - 0x0000000050027960 is .rela.dyn in =
/libexec/ld-elf.so.1
>> 0x0000000050027960 - 0x0000000050045a04 is .text in =
/libexec/ld-elf.so.1
>> 0x0000000050045a04 - 0x00000000500484a3 is .rodata in =
/libexec/ld-elf.so.1
>> 0x00000000500484a4 - 0x00000000500484a4 is .eh_frame in =
/libexec/ld-elf.so.1
>> 0x000000005005cf50 - 0x000000005005cf58 is .fini_array in =
/libexec/ld-elf.so.1
>> 0x000000005005cf58 - 0x000000005005d260 is .data.rel.ro in =
/libexec/ld-elf.so.1
>> 0x000000005005d260 - 0x000000005005d3b0 is .dynamic in =
/libexec/ld-elf.so.1
>> 0x000000005005d3b0 - 0x000000005005ff00 is .opd in =
/libexec/ld-elf.so.1
>> 0x000000005005ff00 - 0x000000005005ff08 is .got in =
/libexec/ld-elf.so.1
>> 0x0000000050060000 - 0x0000000050060628 is .data in =
/libexec/ld-elf.so.1
>> 0x0000000050060628 - 0x0000000050061478 is .bss in =
/libexec/ld-elf.so.1
>> 0x00000000500621c8 - 0x00000000500672b0 is .hash in =
/lib/libc.so.7
>> 0x00000000500672b0 - 0x0000000050079778 is .dynsym in =
/lib/libc.so.7
>> 0x0000000050079778 - 0x0000000050080846 is .dynstr in =
/lib/libc.so.7
>> 0x0000000050080846 - 0x00000000500820ac is .gnu.version in =
/lib/libc.so.7
>> 0x00000000500820b0 - 0x00000000500821c0 is .gnu.version_d in =
/lib/libc.so.7
>> 0x00000000500821c0 - 0x00000000500c2678 is .rela.dyn in =
/lib/libc.so.7
>> 0x00000000500c2678 - 0x00000000500c7868 is .rela.plt in =
/lib/libc.so.7
>> 0x00000000500c7870 - 0x00000000500c789c is .init in =
/lib/libc.so.7
>> 0x00000000500c78a0 - 0x0000000050227ca0 is .text in =
/lib/libc.so.7
>> 0x0000000050227ca0 - 0x0000000050227cc4 is .fini in =
/lib/libc.so.7
>> 0x0000000050227d00 - 0x000000005023b606 is .rodata in =
/lib/libc.so.7
>> 0x000000005023b608 - 0x000000005023b6ec is .eh_frame_hdr in =
/lib/libc.so.7
>> 0x000000005023b6f0 - 0x000000005023bad4 is .eh_frame in =
/lib/libc.so.7
>> 0x0000000050253318 - 0x0000000050253380 is .tdata in =
/lib/libc.so.7
>> 0x0000000050253380 - 0x0000000050253390 is .tbss in =
/lib/libc.so.7
>> 0x0000000050253380 - 0x0000000050253390 is .init_array in =
/lib/libc.so.7
>> 0x0000000050253390 - 0x0000000050253398 is .fini_array in =
/lib/libc.so.7
>> 0x0000000050253398 - 0x00000000502533a8 is .ctors in =
/lib/libc.so.7
>> 0x00000000502533a8 - 0x00000000502533b8 is .dtors in =
/lib/libc.so.7
>> 0x00000000502533b8 - 0x00000000502533c0 is .jcr in =
/lib/libc.so.7
>> 0x00000000502533c0 - 0x0000000050258a90 is .data.rel.ro in =
/lib/libc.so.7
>> 0x0000000050258a90 - 0x0000000050258c60 is .dynamic in =
/lib/libc.so.7
>> 0x0000000050258c60 - 0x000000005026f8f8 is .opd in =
/lib/libc.so.7
>> 0x000000005026f900 - 0x0000000050271f98 is .got in =
/lib/libc.so.7
>> 0x0000000050272000 - 0x0000000050277208 is .plt in =
/lib/libc.so.7
>> 0x0000000050277208 - 0x000000005027b0b0 is .data in =
/lib/libc.so.7
>> 0x000000005027b0b0 - 0x0000000050294738 is .bss in =
/lib/libc.so.7
>>=20
>>=20
>> =3D=3D=3D
>> Mark Millard
>> markmi at dsl-only.net
>>=20
>> On 2017-Jan-17, at 1:56 PM, Roman Divacky <rdivacky at vlakno.cz> =
wrote:
>>=20
>>> Go with Out.
>>>=20
>>> On Tue, Jan 17, 2017 at 01:53:14PM -0800, Mark Millard wrote:
>>>> On 2017-Jan-17, at 11:54 AM, Roman Divacky <rdivacky at vlakno.cz> =
wrote:
>>>>=20
>>>> . . .
>>>>> I wonder if it doesnt work because of my first patch (the one to =
turn GOT
>>>>> reloc into PLT one).
>>>>>=20
>>>>> LLD understands that we use GOT as TOC (which was true before my =
patch),
>>>>> I wonder if something like this:
>>>>>=20
>>>>> ndex: tools/lld/ELF/Target.cpp
>>>>> =
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
>>>>> --- tools/lld/ELF/Target.cpp (revision 292071)
>>>>> +++ tools/lld/ELF/Target.cpp (working copy)
>>>>> @@ -1070,7 +1070,8 @@
>>>>> }
>>>>>=20
>>>>> PPC64TargetInfo::PPC64TargetInfo() {
>>>>> - PltRel =3D GotRel =3D R_PPC64_GLOB_DAT;
>>>>> + GotRel =3D R_PPC64_GLOB_DAT;
>>>>> + PltRel =3D R_PPC64_JMP_SLOT;
>>>>> RelativeRel =3D R_PPC64_RELATIVE;
>>>>> GotEntrySize =3D 8;
>>>>> GotPltEntrySize =3D 8;
>>>>> @@ -1099,7 +1100,7 @@
>>>>> // TOC starts where the first of these sections starts. We always =
create a
>>>>> // .got when we see a relocation that uses it, so for us the start =
is always
>>>>> // the .got.
>>>>> - uint64_t TocVA =3D In<ELF64BE>::Got->getVA();
>>>>> + uint64_t TocVA =3D In<ELF64BE>::Plt->getVA();
>>>>>=20
>>>>> // Per the ppc64-elf-linux ABI, The TOC base is TOC value plus =
0x8000
>>>>> // thus permitting a full 64 Kbytes segment. Note that the glibc =
startup
>>>>=20
>>>> The modern 3.9.1 source does not match for the last. Note the
>>>> "Out" vs. "In" below ("svnlite status" does not show my source
>>>> as different in this area):
>>>>=20
>>>> uint64_t getPPC64TocBase() {
>>>> // The TOC consists of sections .got, .toc, .tocbss, .plt in that =
order. The
>>>> // TOC starts where the first of these sections starts. We always =
create a
>>>> // .got when we see a relocation that uses it, so for us the start =
is always
>>>> // the .got.
>>>> uint64_t TocVA =3D Out<ELF64BE>::Got->getVA();
>>>>=20
>>>> // Per the ppc64-elf-linux ABI, The TOC base is TOC value plus =
0x8000
>>>> // thus permitting a full 64 Kbytes segment. Note that the glibc =
startup
>>>> // code (crt1.o) assumes that you can get from the TOC base to the
>>>> // start of the .toc section with only a single (signed) 16-bit =
relocation.
>>>> return TocVA + PPC64TocOffset;
>>>> }
>>>>=20
>>>> [Also the "// TOC . . ." comment is at line 1005 (given the prior
>>>> GotRel vs. PltRel split into separate lines).]
>>>>=20
>>>> Which should I use?: In vs. Out
>>>>=20
>>>>> would make any difference? It's not correct but might shed some =
light on what needs to be done
>>>>> if I am right.
>>>>=20
>>>> Separately if I understand the change you are picking out which =
section
>>>> is first of .got, .toc, .tocbss, .plt (.got.plt as well?). But for =
the
>>>> order of things that would still make the .ctors, .dtors, .jcr, =
.dynamic,
>>>> and .data sections as being inside the TOC and taking TOC address =
range
>>>> space:
>>>>=20
>>>> 0x0000000010010560 - 0x00000000100105c0 is .plt =
<<<<<=3D=3D=3D=3D=3D NOTE!!!!
>>>> 0x0000000010020000 - 0x0000000010020010 is .ctors
>>>> 0x0000000010020010 - 0x0000000010020020 is .dtors
>>>> 0x0000000010020020 - 0x0000000010020028 is .jcr
>>>> 0x0000000010020028 - 0x0000000010020138 is .dynamic
>>>> 0x0000000010020138 - 0x0000000010020138 is .got =
<<<<<=3D=3D=3D=3D=3D NOTE!!!!
>>>> 0x0000000010030000 - 0x0000000010030019 is .data
>>>> 0x0000000010030020 - 0x0000000010030050 is .got.plt =
<<<<<=3D=3D=3D=3D=3D NOTE!!!!
>>>> 0x0000000010030050 - 0x00000000100300a0 is .toc =
<<<<<=3D=3D=3D=3D=3D NOTE!!!!
>>>>=20
>>>> Is that expected/desired/allowed?
>>>>=20
>>>>> Could you explore this please?
>>>>=20
>>>> After you report for sure for In vs. Out I'll take a stab
>>>> at it.
>>>>=20
>>>> =3D=3D=3D
>>>> Mark Millard
>>>> markmi at dsl-only.net
>=20
> _______________________________________________
> freebsd-toolchain@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-toolchain
> To unsubscribe, send any mail to =
"freebsd-toolchain-unsubscribe@freebsd.org"
>=20
> _______________________________________________
> freebsd-toolchain@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-toolchain
> To unsubscribe, send any mail to =
"freebsd-toolchain-unsubscribe@freebsd.org"
>=20
> _______________________________________________
> freebsd-toolchain@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-toolchain
> To unsubscribe, send any mail to =
"freebsd-toolchain-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41DE5AA2-5794-4BE6-8BDD-C3C7C84F9C83>