Date: Thu, 6 Jun 1996 11:32:53 +1000 (EST) From: Paul Sondhu <paul@riker.comcirc.com.au> To: questions@freebsd.org Subject: Problem with using FreeBSD as a gateway between a LAN and PPP dialup access to the internet Message-ID: <Pine.BSF.3.91.960606113117.5033D-100000@riker.comcirc.com.au>
next in thread | raw e-mail | index | archive | help
Hi, I am having some troubles in trying to set up FreeBSD as a gateway between the internet and a small LAN. My Configuration is this - I have a FreeBSD machine which uses PPP modem dialup to a xylogics annex terminal server which connects me to the internet. My FreeBSD machine is on an ethernet LAN with Windows 95 client machines. My FreeBSD machine is configured like this - I use ppp to dialup to the terminal server, log in, and then I configure the tun0 interface and default route as follows. ifconfig tun0 203.17.165.101 203.17.165.101 netmask 255.255.255.128 route add default 203.17.165.101 where 203.17.165.101 is the IP address assigned to me by the terminal server. I then configure my ethernet interface in the following way - ifconfig ed0 203.17.165.129 netmask 255.255.255.128 where 203.17.165.129 is the IP address I gave to the network card on the FreeBSD machine. As you can see I am subnetting the Class C address's that are assigned to us. I am doing this since I am trying to route between two differnet physical networks ( my ethernet and dialup line ) and as far as I know in order to do this they must be on different subnets. Am I right here???? At this stage, I can connect to the internet OK from my FreeBSD machine and I can connect to my FreeBSD machine from my Windows 95 clients, but I can't connect to the internet from the Windows 95 clients. The FreeBSD machine doesnt seem to be routing between my LAN and the internet ( I have the GATEWAY option enabled in the /etc/sysconfig file ). What I did next was see if I could ping our terminal server from my win95 client machines. I couldnt. I then connected into our terminal server and added a route to one of the win95 client machines to see what happened. ( route add 203.17.165.130 255.255.255.255 203.17.165.101 on the annex, where 203.17.165.130 is the IP number I assigned to the win95 client ). I could then ping the terminal server from the client machine and vice versa but I still could'nt go past the terminal server. I was wondering if anyone could help me with this problem. Regards, Paul. ------------------------------------------------------------------------- Paul Sondhu Email: P.Sondhu@comcirc.com.au Computer Circuit Pty. Ltd. Tel: +61 53 826 959 27 Darlot St. Fax: +61 53 826 301 Horsham 3400 WWW: http://www.comcirc.com.au/staff/paul Victoria Australia -------------------------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.960606113117.5033D-100000>