Date: Mon, 02 Mar 2009 07:48:40 -0600 From: Adam Vande More <amvandemore@gmail.com> Cc: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: Bridging-(How to test and verify that bridging is enabled) Message-ID: <49ABE3B8.1010801@gmail.com> In-Reply-To: <BLU149-W39D17E34A52D39B08A8503B6A90@phx.gbl> References: <BLU149-W30AA22383B41E0B5F3E951B6A90@phx.gbl> <200903020828.n228SAN7080657@banyan.cs.ait.ac.th> <BLU149-W4004210FC05DBF9A1D024B6A90@phx.gbl> <200903020935.n229ZXXo090477@banyan.cs.ait.ac.th> <BLU149-W39D17E34A52D39B08A8503B6A90@phx.gbl>
next in thread | previous in thread | raw e-mail | index | archive | help
Faizan ul haq Muhammad wrote: > > > > > > >> Date: Mon, 2 Mar 2009 16:35:33 +0700 >> From: on@cs.ait.ac.th >> To: faizi62@hotmail.com >> CC: fbsd.questions@rachie.is-a-geek.net; freebsd-questions@freebsd.org; fbsd1@a1poweruser.com >> Subject: Re: Bridging-(How to test and verify that bridging is enabled) >> >> Hi, >> >> >>>> Are you using properly crossed cables? >>>> >>> Isnt it enough check for the that two linux can ping each other.. >>> >> Yes and no. You must used crossed Ethernet cable between your FreeBSD >> bridge and each of your Linux boxes. >> > Frankly i am not sure about the cables type but they works PC to PC connectivity. > >> As someone suggested, what is ifconfig saying on the FreeBSD box? You >> should see that both sk0 and sk1 have a status: active. Else it means >> you have a cable problem. >> > > sk0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=b<RXCSUM, TXCSUM, VLAN_MTU > ether 00:0a:5e:1a:69:25 > media: Ethernet autoselect (1000baseTX <full-duplex, flag0, flag1, flag2>) > status: active > > > > > > sk1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=b<RXCSUM, TXCSUM, VLAN_MTU > ether 00:0a:5e:1a:67:ee > media: Ethernet autoselect (1000baseTX <full-duplex, flag0, flag1, flag2>) > status: active > > > > here is the ifconfig output for the bridge interface: > > bridge0: flags=8943<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > > options=b<RXCSUM, TXCSUM, VLAN_MTU > ether 0a:54:d7:7e:aa:66 > > inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255 > > id 00:00:00:00:00:00 priortiy 32768 hellotime 2 fwddelay 15 > > maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200 > > root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 > I think ifconfig bridge0 should list member interfaces. Did you add them?
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49ABE3B8.1010801>