Date: Sat, 25 Jan 2003 17:39:18 +0100 From: Dan Johansson <djodv97@student.vxu.se> To: Dan Johansson <djodv97@student.vxu.se> Cc: freebsd-stable@FreeBSD.ORG Subject: Re: System hangs stable Jan 22 Message-ID: <3E32BDB6.1020304@student.vxu.se> In-Reply-To: <3E329BD3.1060500@student.vxu.se> References: <3E329BD3.1060500@student.vxu.se>
next in thread | previous in thread | raw e-mail | index | archive | help
Oops saw that I do get an error message: All mbuf clusters exhausted, please see tuning(7) ... this goes on and on forever, and the machine does not respond to anything. Is the solution to increase kern.ipc.nmbclusters ? I still do not think that the machine should freeze as it does, should it? Dan Johansson wrote: > Hi ! > Yesterday my system froze twice during build of the lyx port over nfs. > I was unable to do anything to restore the system but to turn off the > power. Building lyx using local ports dir succeded. So I guess there > is something wrong with nfs ? The nfs server is on a 4.7-release system. > My computer is a dell inspiron 7500. If you want more info tell me > what to get. > > firebat# uname -a > FreeBSD firebat.foo.bar 4.7-STABLE FreeBSD 4.7-STABLE #1: Thu Jan 23 > 14:51:36 CET 2003 > wrang@firebat.foo.bar:/usr/obj/usr/src/sys/firebat i386 > > The stable was cvsup'ed on Jan 22 2003. > > firebat# df -h > Filesystem Size Used Avail Capacity Mounted on > /dev/ad0s2a 126M 46M 70M 39% / > /dev/ad0s2f 252M 1.3M 231M 1% /tmp > /dev/ad0s2g 1.7G 1.3G 306M 81% /usr > /dev/ad0s2e 252M 9.3M 222M 4% /var > procfs 4.0K 4.0K 0B 100% /proc > dragon:/usr/ports 3.1G 2.1G 763M 74% /usr/ports > > firebat# ifconfig xe0 > xe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > inet6 fe80::210:a4ff:feb5:4917%xe0 prefixlen 64 scopeid 0x3 > inet 192.168.1.5 netmask 0xffffff00 broadcast 192.168.1.255 > ether 00:10:a4:b5:49:17 > media: Ethernet autoselect (100baseTX) > > dmesg: > Copyright (c) 1992-2003 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.7-STABLE #1: Thu Jan 23 14:51:36 CET 2003 > wrang@firebat.foo.bar:/usr/obj/usr/src/sys/firebat > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium III/Pentium III Xeon/Celeron (501.14-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x681 Stepping = 1 > > Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 134152192 (131008K bytes) > config> di sn0 > No such device: sn0 > Invalid command or syntax. Type `?' for help. > config> di lnc0 > No such device: lnc0 > Invalid command or syntax. Type `?' for help. > config> di ie0 > No such device: ie0 > Invalid command or syntax. Type `?' for help. > config> di fe0 > No such device: fe0 > Invalid command or syntax. Type `?' for help. > config> di ed0 > No such device: ed0 > Invalid command or syntax. Type `?' for help. > config> di cs0 > No such device: cs0 > Invalid command or syntax. Type `?' for help. > config> di bt0 > No such device: bt0 > Invalid command or syntax. Type `?' for help. > config> di aic0 > No such device: aic0 > Invalid command or syntax. Type `?' for help. > config> di aha0 > No such device: aha0 > Invalid command or syntax. Type `?' for help. > config> di adv0 > No such device: adv0 > Invalid command or syntax. Type `?' for help. > config> q > avail memory = 126787584 (123816K bytes) > Preloaded elf kernel "kernel" at 0xc03b5000. > Preloaded userconfig_script "/boot/kernel.conf" at 0xc03b509c. > netsmb_dev: loaded > Pentium Pro MTRR support enabled > md0: Malloc disk > Using $PIR table, 7 entries at 0xc00fdf50 > apm0: <APM BIOS> on motherboard > apm0: found APM BIOS v1.2, connected at v1.2 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem > 0xe0000000-0xe3ffffff at device 0.0 on pci0 > pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on > pci0 > pci1: <PCI bus> on pcib1 > pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11 > pci_cfgintr_linked: linked (60) to hard-routed irq 11 > pci_cfgintr: 0:4 INTA routed to irq 11 > pcic0: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 4.0 on pci0 > pcic0: PCI Memory allocated: 0x88000000 > pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr > save][FUNC pci int + CSC serial isa irq] > pccard0: <PC Card 16-bit bus (classic)> on pcic0 > pci_cfgintr_linked: linked (60) to hard-routed irq 11 > pci_cfgintr: 0:4 INTA routed to irq 11 > pcic1: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 4.1 on pci0 > pcic1: PCI Memory allocated: 0x88001000 > pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr > save][FUNC pci int + CSC serial isa irq] > pccard1: <PC Card 16-bit bus (classic)> on pcic1 > isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device > 7.1 on pci0 > ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f > irq 5 at device 7.2 on pci0 > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > chip0: <Intel 82371AB Power management controller> port 0x1040-0x104f > at device 7.3 on pci0 > pcm0: <ESS Technology Maestro-2E> port 0x1400-0x14ff irq 5 at device > 8.0 on pci0 > orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode > ppc0: FIFO with 16/16/7 bytes threshold > ppi0: <Parallel I/O> on ppbus0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > pccard: card inserted, slot 0 > pccard: card removed, slot 0 > ad0: 6194MB <IBM-DBCA-206480> [13424/15/63] at ata0-master UDMA33 > acd0: CDROM <TOSHIBA CD-ROM XM-1902B> at ata1-master PIO4 > Mounting root from ufs:/dev/ad0s2a > pccard: card inserted, slot 0 > xe0 at port 0x240-0x24f iomem 0xd1000-0xd1fff irq 11 slot 0 on pccard0 > xe0: Xircom CE3, bonding version 0x45, 100Mbps capable > xe0: DingoID = 0x444b, RevisionID = 0x1, VendorID = 0 > xe0: Ethernet address 00:10:a4:b5:49:17 > module_register: module pccard/xe already exists! > linker_file_sysinit "if_xe.ko" failed to register! 17 > xe0: watchdog timeout; resetting card > > > /Dan > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3E32BDB6.1020304>