Date: Thu, 3 Feb 2011 15:00:28 -0600 From: Brandon Gooch <jamesbrandongooch@gmail.com> To: David Demelier <demelier.david@gmail.com> Cc: Joerg.Schilling@fokus.fraunhofer.de, Alexander Motin <mav@freebsd.org>, freebsd-questions@freebsd.org Subject: Re: Can't burn with ahci(4) and cdrecord Message-ID: <AANLkTi=YbezonTj0Lt102beoRqjTf1NWQ9imrEgHPD_7@mail.gmail.com> In-Reply-To: <4D4B11D0.3050709@gmail.com> References: <4D4B11D0.3050709@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Feb 3, 2011 at 2:36 PM, David Demelier <demelier.david@gmail.com> w= rote: > Hello, > > I tried to burn a little iso with ahci(4) instead of old ata drivers and = it > fails to burn with : > > markand@Melon ~ $ sudo cdrecord downloads/ubuntu-10.10-desktop-i386.iso > cdrecord: No write mode specified. > cdrecord: Assuming -sao mode. > cdrecord: If your drive does not accept -sao, try -tao. > cdrecord: Future versions of cdrecord may have different drive dependent > defaults. > Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.2) Copyright (C) > 1995-2010 J=F6rg Schilling > Using libscg version 'schily-0.9'. > No target specified, trying to find one... > Using dev=3D1,0,0. > Device type =A0 =A0: Removable CD-ROM > Version =A0 =A0 =A0 =A0: 0 > Response Format: 2 > Capabilities =A0 : > Vendor_info =A0 =A0: 'hp =A0 =A0 =A0' > Identifikation : 'DVDRAM GT20L =A0 =A0' > Revision =A0 =A0 =A0 : 'DC05' > Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM. > Using generic SCSI-3/mmc =A0 CD-R/CD-RW driver (mmc_cdr). > Driver flags =A0 : MMC-3 SWABAUDIO BURNFREE > Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R9= 6R > LAYER_JUMP > Starting to write CD/DVD/BD at speed 24 in real SAO mode for single sessi= on. > Last chance to quit, starting real write =A0 =A00 seconds. Operation star= ts. > Turning BURN-Free off > cdrecord: WARNING: Drive returns wrong startsec (0) using -150 > cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error > CDB: =A02A 00 FF FF FF 6A 00 00 20 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 = 00 > 00 00 00 00 00 00 00 00 00 00 00 > Sense Key: 0xFFFFFFFF [], Segment 0 > Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 > Sense flags: Blk 0 (not valid) > resid: 65536 > cmd finished after 13.147s timeout 200s > write track pad data: error after 0 bytes > BFree: 597 K BSize: 597 K > cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error > CDB: =A02A 00 00 00 00 00 00 00 20 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 = 00 > 00 00 00 00 00 00 00 00 00 00 00 > Sense Key: 0xFFFFFFFF [], Segment 0 > Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0 > Sense flags: Blk 0 (not valid) > resid: 65536 > cmd finished after 0.001s timeout 200s > write track data: error after 0 bytes > cdrecord: A write error occured. > cdrecord: Please properly read the error message above. > > This is happening on my HP Probook 4510s with 8.2-RC2 amd64. Are you on 8.x or 9? I think this is due to a known issue [1]. Alexander Motin has patches for 9-CURRENT [2] that fix the issue for me (and others). He hasn't had time to clean up the patches for committal to the tree, and the patches may no longer cleanly apply -- I haven't re-patched since my last few updates. Let us know if the patches work for you. -Brandon [1] http://lists.freebsd.org/pipermail/freebsd-current/2010-November/020944= .html [2] http://people.freebsd.org/~mav/sense/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?AANLkTi=YbezonTj0Lt102beoRqjTf1NWQ9imrEgHPD_7>