Date: Wed, 13 Dec 2000 15:58:32 -0600 From: lambert@cswnet.com To: freebsd-stable@freebsd.org Subject: Problems booting 486/66 after 3.1 Message-ID: <20001213224956.7E0EC5D319@mail.cswnet.com>
next in thread | raw e-mail | index | archive | help
Hi
I have a Micronics 486 VLB motherboard (unknown exact model) that doesn't
like FreeBSD beyond 3.x. 3.1-RELEASE works fine on this motherboard but
4.x versions reboot immediately following the display of the Copyright
notices and FreeBSD version line.
I have been trying to upgrade this installation since 4.0-RELEASE. I just
haven't had time to determine exactly which release blows up until today.
I believe that getting 3.5.1-RELEASE boot -v output will require several
hours / days to download and install. By that time I will probably not
have time to work on it again. I could do a 3.4 install if you need it.
What other data do I need to gather?
I have an ed0 interface at 0x300 but I can't convince 3.1 to use the
kernel.config file to enable it automagically from either / or /boot/.
boot -v with 3.1-RELEASE:
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
FreeBSD 3.1-RELEASE #0: Mon Feb 15 11:08:08 GMT 1999
jkh@usw3.freebsd.org:/usr/src/sys/compile/GENERIC
Calibrating clock(s) ... i8254 clock: 1192914 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CPU: i486 DX2 (486-class CPU)
Origin = "GenuineIntel" Id = 0x435 Stepping=5
Features=0x3<FPU,VME>
real memory = 33554432 (32768K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0034d000 - 0x01ffdfff, 30085120 bytes (7345 pages)
avail memory = 29503488 (28812K bytes)
Other BIOS signatures found:
ACPI: 00000000
$PnP: 00000000
Preloaded elf kernel "kernel" at 0xf0340000.
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0xffffffff
pci_open(2): mode 2 enable port (0x0cf8) is 0xff
Probing for devices on the ISA bus:
atkbd: the current kbd controller command byte 0045
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0 on isa
sc0: fb0 kbd0
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
fe0 not found at 0x300
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
kbd0: atkbd0, AT 101/102 (2), config:0x10000, flags:0x3d0000
psm0: current command byte:0045
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
psm0 not found
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: disabled, not probed.
sio3: disabled, not probed.
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <WDC AC23200L>
wd0: 3098MB (6346368 sectors), 6296 cyls, 16 heads, 63 S/T, 512 B/S
wd0: ATA INQUIRE valid = 0007, dmamword = 0407, apio = 0003, udma = 0007
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <CD-ROM CDU76E/1.0h>, removable, accel, dma, iordy
acd0: drive speed 689KB/sec, 256KB cache
acd0: supported read types: CD-DA
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: no/blank disc inside, unlocked
wt0 not found at 0x300
mcd0: timeout getting status
mcd0 not found at 0x300
matcdc0 not found at 0x230
scd0 not found at 0x230
ppc: parallel port found at 0x378
PC873xx probe at 0x2e got unknown ID 0x0
ppc0: SMC registers CR1=0xb6 CR4=0x2 ECP SPP
ppc0 at 0x378 irq 7 on isa
ppc0: SMC FDC37C665GT chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip: irq 7
plip0: <PLIP network interface> on ppbus 0
ie0: unknown board_id: 8
ie0 not found at 0x300
ep0 not found at 0x300
ex0 not found
le0 not found at 0x300
lnc0 not found at 0x280
ze0 not found at 0x300
zp0 not found at 0x300
cs0: trying to reset the chip.
cs0 not found at 0x300
adv0 not found at 0x330
bt0: Failed Status Reg Test - ff
bt0: Failed Status Reg Test - ff
bt0: Failed Status Reg Test - ff
bt0: Failed Status Reg Test - ff
bt0: Failed Status Reg Test - ff
bt0: Failed Status Reg Test - ff
bt0 not found at 0x134
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 not found at 0x134
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xf00b8000 size:32k gran:32k, buf:0x0 size:0k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
npx0 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed.
imasks: bio c008c040, tty c007009a, net c007009a
BIOS Geometries:
0:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
1:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
2:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
3:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
4:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
5:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
6:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
7:00000000 0..0=1 cylinders, 0..0=1 heads, 1..0=0 sectors
0 accounted for
Device configuration finished.
new masks: bio c008c040, tty c007009a, net c007009a
Considering MFS root f/s.
No MFS image available as root f/s.
Considering FFS root f/s.
changing root device to wd0s1a
wd0s1: type 0xa5, start 63, end = 6345863, size 6345801 : OK
--
Scott Lambert
lambert@cswnet.com
Systems and Security Administrator
CSW Net, Inc.
================================================================
Written: Wednesday, December 13, 2000 - 03:58 PM
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20001213224956.7E0EC5D319>