Date: Wed, 25 Oct 2000 09:31:30 +0200 From: Thierry.Herbelot@alcatel.fr To: "Joseph W. Stein" <joes@shasta.joescanner.com> Cc: stable@FreeBSD.ORG Subject: Re: ATA problems (rehashed) Message-ID: <C1256983.00295729.00@frmta003.netfr.alcatel.fr>
next in thread | raw e-mail | index | archive | help
[CC trimmed]
You may try to change your second hard disk to the other IDE bus (ata1).
This certainly will not cure all of your problems, but will reduce the risk
of bad influence of one drive to the other.
TfH
"Joseph W. Stein" <joes@shasta.joescanner.com> on 25/10/2000 09:18:07
To: jkh@FreeBSD.ORG, sos@FreeBSD.ORG,
stable@FreeBSD.ORG
cc: (bcc: Thierry HERBELOT/FR/ALCATEL)
Subject: ATA problems (rehashed)
I now have my system back up and somewhat operational.
[SNIP]
[dmesg]
ata0-master: success setting WDMA2 on AMD chip
ad0: <QUANTUM FIREBALL_TM3840A/A6B.2400> ATA-0 disk at ata0 as master
ad0: 3681MB (7539840 sectors), 7480 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 1 secs/int, 1 depth queue, WDMA2
ad0: piomode=4 dmamode=2 udmamode=-1 cblid=0
Creating DISK ad0
Creating DISK wd0
ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable
ata0-slave: success setting UDMA2 on AMD chip
ad1: <QUANTUM FIREBALL CR4.3A/A5U.1200> ATA-4 disk at ata0 as slave
ad1: 4110MB (8418816 sectors), 14848 cyls, 9 heads, 63 S/T, 512 B/S
ad1: 16 secs/int, 1 depth queue, UDMA33
ad1: piomode=4 dmamode=2 udmamode=4 cblid=0
Creating DISK ad1
Creating DISK wd1
Mounting root from ufs:/dev/ad0s1a
ad0: READ command timeout - resetting
ata0: resetting devices .. ata0: mask=03 status0=50 status1=50
ata0-master: success setting WDMA2 on AMD chip
ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable
ata0-slave: success setting UDMA2 on AMD chip
done
ad0: READ command timeout - resetting
ata0: resetting devices .. ata0: mask=03 status0=50 status1=50
ata0-master: success setting WDMA2 on AMD chip
ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable
ata0-slave: success setting UDMA2 on AMD chip
done
ad0: READ command timeout - resetting
ata0: resetting devices .. ata0: mask=03 status0=50 status1=50
ata0-master: success setting WDMA2 on AMD chip
ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable
ata0-slave: success setting UDMA2 on AMD chip
done
ad0: READ command timeout - resetting
ata0-master: WARNING: WAIT_READY active=ATA_ACTIVE_ATA
ata0-master: success setting PIO4 on generic chip
ad0: trying fallback to PIO mode
ata0: resetting devices .. ata0: mask=03 status0=50 status1=50
ata0-master: success setting PIO4 on generic chip
ata0-slave: DMA limited to UDMA33, non-ATA66 compliant cable
ata0-slave: success setting UDMA2 on AMD chip
done
ad0s1: type 0xa5, start 63, end = 7539839, size 7539777 : OK
start_init: trying /sbin/init
splash: image decoder found: green_saver
Linux-ELF exec handler installed
--
Joseph Stein; Beaverton, Oregon USA email: joes@wstein.com
Finger joes@shasta.wstein.com for contact information and PGP Public Key!
Oregon FirePage http://www.ofp.org [OFP18]
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?C1256983.00295729.00>