Date: Thu, 23 Oct 2008 22:17:15 +0100 (BST) From: "Reinhold" <freebsd@violetlan.net> To: "Torfinn Ingolfsen" <torfinn.ingolfsen@broadpark.no> Cc: freebsd-stable@freebsd.org Subject: Re: After an update stable doesn't boot Message-ID: <59872.217.45.165.129.1224796635.squirrel@www.violetlan.net> In-Reply-To: <20081023225735.706f4f2b.torfinn.ingolfsen@broadpark.no> References: <64584.217.45.165.129.1224787913.squirrel@www.violetlan.net> <54609.217.45.165.129.1224794423.squirrel@www.violetlan.net> <20081023225735.706f4f2b.torfinn.ingolfsen@broadpark.no>
index | next in thread | previous in thread | raw e-mail
On Thu, October 23, 2008 21:57, Torfinn Ingolfsen wrote:
>
> Some quick checks:
> - use fdisk (for example: fdisk ad0) to check if the correct slice is
> active - use boot0cfg -v to check the bootcode of the disk you are booting
> from
>
Hi
Thanks for getting back to me.
Here is the info I have from fdisk and boot0cfg
# fdisk ad12
******* Working on device /dev/ad0 *******
parameters extracted from in-core disklabel are:
cylinders=310101 heads=16 sectors/track=63 (1008 blks/cyl)
Figures below won't work with BIOS for partitions not in cyl 1
parameters to be used for BIOS calculations are:
cylinders=310101 heads=16 sectors/track=63 (1008 blks/cyl)
Media sector size is 512
Warning: BIOS sector numbering starts with sector 1
Information from DOS bootblock is:
The data for partition 1 is:
sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD)
start 63, size 312576642 (152625 Meg), flag 80 (active)
beg: cyl 0/ head 1/ sector 1;
end: cyl 1023/ head 254/ sector 63
The data for partition 2 is:
<UNUSED>
The data for partition 3 is:
<UNUSED>
The data for partition 4 is:
<UNUSED>
and from
# boot0cfg -v ad12
# flag start chs type end chs offset size
1 0x80 0: 1: 1 0xa5 1023:254:63 63 312576642
version=1.0 drive=0x80 mask=0xf ticks=182
options=packet,update,nosetdrv
default_selection=F1 (Slice 1)
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?59872.217.45.165.129.1224796635.squirrel>