Date: Sun, 8 Jul 2018 18:02:25 +0200 From: Stefan Bethke <stb@lassitu.de> To: FreeBSD Stable <freebsd-stable@freebsd.org> Subject: Unable to boot memstick on APU2 Message-ID: <092CB2AF-0E63-4B1D-8616-FD69D635CB7F@lassitu.de>
next in thread | raw e-mail | index | archive | help
I'm stumped by a weird error: loader loads the kernel, and the kernel = probes the USB stick successfully, but da0 never shows up. I=E2=80=99ve = tried with FreeBSD-11.1-RELEASE-amd64-memstick.img and = FreeBSD-11.2-RELEASE-amd64-memstick.img. While at the mount root prompt, unplugging and replugging the USB stick = and entering . repeatedly will show the kernel messages, but "da0 at = umass0" never shows up. I=E2=80=99ve added a couple entries to /boot/loader.conf: # cat /mnt/boot/loader.conf vfs.mountroot.timeout=3D"10" beastie_disable=3D"YES" comconsole_speed=3D"115200" console=3D"comconsole" autoboot_delay=3D"1" Here=E2=80=99s the console output from 11.1: Consoles: internal video/keyboard ce+0x67 BIOS drive C: is disk0 t vpanic+0x177 BIOS drive D: is disk1 t panic+0x43 BIOS 638kB/3668660kB available memory +0x1d95 4 0xffffffff80a93b68 at start_init+0x48 FreeBSD/x86 bootstrap loader, Revision 1.1=20 (Fri Jul 21 02:03:08 UTC 2017 root@releng2.nyi.freebsd.org)=20 Loading /boot/defaults/loader.conf=20 //boot/kernel/kernel text=3D0x14972f8 data=3D0x1384c0+0x4c15e8 = syms=3D[0x8+0x15e8b0+0x8+0x178422]ild 20170228 /080 MB ECC DRAM Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... =20 Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights = reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.1-RELEASE #0 r321309: Fri Jul 21 02:08:28 UTC 2017 root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64 FreeBSD clang version 4.0.0 (tags/RELEASE_400/final 297347) (based on = LLVM 4.0.0) VT(vga): resolution 640x480 CPU: AMD GX-412TC SOC (998.15-MHz = K8-class CPU) Origin=3D"AuthenticAMD" Id=3D0x730f01 Family=3D0x16 Model=3D0x30 = Stepping=3D1 = Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE= ,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> = Features2=3D0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,P= OPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C> AMD Features=3D0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> AMD = Features2=3D0x1d4037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSV= W,IBS,SKINIT,WDT,Topology,PNXC,DBE,PTSC,PL2I> Structured Extended Features=3D0x8<BMI1> XSAVE Features=3D0x1<XSAVEOPT> SVM: NP,NRIP,AFlush,DAssist,NAsids=3D8 TSC: P-state invariant, performance statistics real memory =3D 4815060992 (4592 MB) avail memory =3D 4087992320 (3898 MB) Event timer "LAPIC" quality 100 ACPI APIC Table: <CORE COREBOOT> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) ioapic1: Changing APIC ID to 5 ioapic0 <Version 2.1> irqs 0-23 on motherboard ioapic1 <Version 2.1> irqs 24-55 on motherboard SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC" frequency 998148849 Hz quality 1000 random: entropy device external interface kbd0 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff80f5b220, 0) error 19 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <CORE COREBOOT> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.2 on pci0 pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff pci1: <ACPI PCI bus> on pcib1 igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> mem = 0xfe600000-0xfe61ffff,0xfe620000-0xfe623fff at device 0.0 on pci1 igb0: Using MSIX interrupts with 5 vectors igb0: Ethernet address: 00:0d:b9:4b:e2:cc igb0: Bound queue 0 to cpu 0 igb0: Bound queue 1 to cpu 1 igb0: Bound queue 2 to cpu 2 igb0: Bound queue 3 to cpu 3 igb0: netmap queues/slots: TX 4/1024, RX 4/1024 pcib2: <ACPI PCI-PCI bridge> at device 2.3 on pci0 pci2: <ACPI PCI bus> on pcib2 igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port = 0x2000-0x201f mem 0xfe700000-0xfe71ffff,0xfe720000-0xfe723fff at device = 0.0 on pci2 igb1: Using MSIX interrupts with 5 vectors igb1: Ethernet address: 00:0d:b9:4b:e2:cd igb1: Bound queue 0 to cpu 0 igb1: Bound queue 1 to cpu 1 igb1: Bound queue 2 to cpu 2 igb1: Bound queue 3 to cpu 3 igb1: netmap queues/slots: TX 4/1024, RX 4/1024 pcib3: <ACPI PCI-PCI bridge> at device 2.4 on pci0 pci3: <ACPI PCI bus> on pcib3 igb2: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port = 0x3000-0x301f mem 0xfe800000-0xfe81ffff,0xfe820000-0xfe823fff at device = 0.0 on pci3 igb2: Using MSIX interrupts with 5 vectors igb2: Ethernet address: 00:0d:b9:4b:e2:ce igb2: Bound queue 0 to cpu 0 igb2: Bound queue 1 to cpu 1 igb2: Bound queue 2 to cpu 2 igb2: Bound queue 3 to cpu 3 igb2: netmap queues/slots: TX 4/1024, RX 4/1024 pci0: <encrypt/decrypt> at device 8.0 (no driver attached) xhci0: <AMD FCH USB 3.0 controller> mem 0xfeb22000-0xfeb23fff at device = 16.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Unable to map MSI-X table=20 usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 ahci0: <AMD Hudson-2 AHCI SATA controller> port = 0x4010-0x4017,0x4020-0x4023,0x4018-0x401f,0x4024-0x4027,0x4000-0x400f = mem 0xfeb25000-0xfeb253ff at device 17.0 on pci0 ahci0: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported with FBS ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ehci0: <AMD FCH USB 2.0 controller> mem 0xfeb25400-0xfeb254ff at device = 19.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 sdhci_pci0: <Generic SD HCI> mem 0xfeb25500-0xfeb255ff at device 20.7 on = pci0 sdhci_pci0: 1 slot(s) allocated uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 uart0: console (115200,n,8,1) orm0: <ISA Option ROM> at iomem 0xef000-0xeffff on isa0 ppc0: cannot reserve I/O port range uart1: <16550 or compatible> at port 0x2f8 irq 3 on isa0 hwpstate0: <Cool`n'Quiet 2.0> on cpu0 Timecounters tick every 1.000 msec nvme cam probe device init ugen1.1: <AMD EHCI root HUB> at usbus1 ugen0.1: <0x1022 XHCI root HUB> at usbus0 uhub0: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on = usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SATA SSD SBFM01.1> ACS-4 ATA SATA 3.x device ada0: Serial Number A4620782148900312898 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 15272MB (31277232 512 byte sectors) Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]... Root mount waiting for: usbus1 usbus0 uhub1: 4 ports with 4 removable, self powered uhub0: 2 ports with 2 removable, self powered Root mount waiting for: usbus1 usbus0 ugen1.2: <vendor 0x0438 product 0x7900> at usbus1 uhub2 on uhub0 uhub2: <vendor 0x0438 product 0x7900, class 9/0, rev 2.00/0.18, addr 2> = on usbus1 Root mount waiting for: usbus1 usbus0 ugen0.2: <Kingston DataTraveler G3> at usbus0 umass0 on uhub1 umass0: <Kingston DataTraveler G3, class 0/0, rev 2.00/1.00, addr 1> on = usbus0 umass0: SCSI over Bulk-Only; quirks =3D 0x8100 umass0:2:0: Attached to scbus2 uhub2: 4 ports with 4 removable, self powered mountroot: waiting for device /dev/ufs/FreeBSD_Install... Mounting from ufs:/dev/ufs/FreeBSD_Install failed with error 19. Loader variables: vfs.root.mountfrom=3Dufs:/dev/ufs/FreeBSD_Install vfs.root.mountfrom.options=3Dro,noatime Manual root filesystem specification: <fstype>:<device> [options] Mount <device> using filesystem <fstype> and with the specified (optional) option list. eg. ufs:/dev/da0s1a zfs:tank cd9660:/dev/cd0 ro (which is equivalent to: mount -t cd9660 -o ro /dev/cd0 /) ? List valid disk boot devices . Yield 1 second (for background tasks) <empty line> Abort manual input mountroot> ? List of GEOM managed disk devices: diskid/DISK-A4620782148900312898 ada0 mountroot> . mountroot> ? List of GEOM managed disk devices: diskid/DISK-A4620782148900312898 ada0 --=20 Stefan Bethke <stb@lassitu.de> Fon +49 151 14070811
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?092CB2AF-0E63-4B1D-8616-FD69D635CB7F>