Date: Tue, 26 Sep 2000 18:58:44 -0500 From: "Alejandro Ramirez" <ales@megacable.com.mx> To: <chabris@cybercable.fr>, "Denis Schepin" <dastin@nc.elektra.ru> Cc: <stable@FreeBSD.ORG> Subject: Re: Compaq 2500 and SMP Message-ID: <0be301c02815$b4740320$02c134c8@megared.net.mx> References: <39A6240E.3D8C47BF@nc.elektra.ru> <39D0FACF.6B824DB@cybercable.fr>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, There are some issues that you have to take care in order to have an SMP+RAID working together : #3: Run the Compaq system configuration utility to setup your hardware. The first option to set is the Primary Operating System. Set this to "Unixware 7." You must set it to "Unixware 7" for SMP to function. Even if you only have one processor. This is the most important thing to take care of , but there are more tips in this page, that you may want to take a look: http://www.daemonnews.org/200003/cpqraid.html Have Fun... Ales ----- Original Message ----- From: "Gilbert Dubois" <chabris@cybercable.fr> To: "Denis Schepin" <dastin@nc.elektra.ru> Cc: <stable@FreeBSD.ORG> Sent: Tuesday, September 26, 2000 2:36 PM Subject: Re: Compaq 2500 and SMP > Denis Schepin wrote: > > > Hi! > > My name is Denis. I use Compaq Proliant 2500 with OS FreeBSD > > -3.0-STBALE during > > three years. Smart RAID Array controller appear in my system recently. > > I > > use standart on-board controller ncr before. Now, I build system > > 4.1-STABLE with > > Smart RAID Controller where ROOTDEV /dev/idada0s1a . And appears > > problem > > with SMP . Then boot process kernel compiled with supporting SMP, > > broke > > when reach phrase > > Mount root device from /dev/idada0s1a > > and then nothings happen. When I compile the kernel without SMP, boot > > process is complete and machine > > work fine. Perhapes this question not for you, but could you tell me > > some ideas. > > Best regards Deniss. > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-stable" in the body of the message > > Hi Denis, > > I meet the same problem on a Proliant 370, with the same smart array > controller, and - I did not find any solution!. > > Perhaps someone has some idea ? > > Best regards. > > Gilbert > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0be301c02815$b4740320$02c134c8>