Date: Mon, 5 Aug 2013 16:32:09 -0700 From: Davide Italiano <davide@freebsd.org> To: "Sam Fourman Jr." <sfourman@gmail.com> Cc: Dan Mack <mack@macktronics.com>, freebsd-current@freebsd.org Subject: Re: LOR on head ... Message-ID: <CACYV=-E0mGQ401mJ1CbndiJHcv4cj-q0Xckn%2BtOaHCcGUrPvNQ@mail.gmail.com> In-Reply-To: <CAOFF%2BZ2PzChhXpOeyeaySbSSXp0v_fjw52yfv3n6fpe-kqaeOQ@mail.gmail.com> References: <alpine.BSF.2.00.1308051742010.10696@olive.macktronics.com> <CAOFF%2BZ2PzChhXpOeyeaySbSSXp0v_fjw52yfv3n6fpe-kqaeOQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Aug 5, 2013 at 4:24 PM, Sam Fourman Jr. <sfourman@gmail.com> wrote: > I am going to respond to this before I forget.... > > I had the SAME exact LOR's with ath 9300 and I reported them, > however I have since switched out motherboards and the LOR's have strangely > diapered > > > here is a full dmesg for a perfectly working system > > FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 > CPU: AMD FX(tm)-4100 Quad-Core Processor (3600.30-MHz K8-class > CPU) > Origin = "AuthenticAMD" Id = 0x600f12 Family = 0x15 Model = 0x1 > Stepping = 2 > > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > > Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX> > AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM> > AMD > Features2=0x1c9bfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,NodeId,Topology,<b23>,<b24>> > TSC: P-state invariant, performance statistics > real memory = 8589934592 (8192 MB) > avail memory = 7868518400 (7504 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <ALASKA A M I> > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 1 package(s) x 4 core(s) > cpu0 (BSP): APIC ID: 16 > cpu1 (AP): APIC ID: 17 > cpu2 (AP): APIC ID: 18 > cpu3 (AP): APIC ID: 19 > ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero > address or length: 0x0000000000000000/0x1 (20130725/tbfadt-630) > ioapic0 <Version 2.1> irqs 0-23 on motherboard > ioapic1 <Version 2.1> irqs 24-55 on motherboard > kbd1 at kbdmux0 > acpi0: <ALASKA A M I> on motherboard > acpi0: Power Button (fixed) > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > cpu2: <ACPI CPU> on acpi0 > cpu3: <ACPI CPU> on acpi0 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > Event timer "i8254" frequency 1193182 Hz quality 100 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 > Timecounter "HPET" frequency 14318180 Hz quality 950 > Event timer "HPET" frequency 14318180 Hz quality 450 > Event timer "HPET1" frequency 14318180 Hz quality 450 > Event timer "HPET2" frequency 14318180 Hz quality 450 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > acpi_ec0: <Embedded Controller: GPE 0xa> port 0x62,0x66 on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pci0: <base peripheral> at device 0.2 (no driver attached) > pcib1: <ACPI PCI-PCI bridge> irq 52 at device 2.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> mem > 0xfd000000-0xfdffffff,0xc0000000-0xcfffffff,0xfc000000-0xfcffffff irq 24 at > device 0.0 on pci1 > pcib2: <ACPI PCI-PCI bridge> irq 52 at device 4.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port > 0xe000-0xe0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 44 at > device 0.0 on pci2 > re0: Using 1 MSI-X message > re0: Chip rev. 0x48000000 > re0: MAC rev. 0x00000000 > miibus0: <MII bus> on re0 > rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 > rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, > 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, > 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow > re0: Ethernet address: 60:a4:4c:57:02:c4 > pcib3: <ACPI PCI-PCI bridge> irq 52 at device 5.0 on pci0 > pci3: <ACPI PCI bus> on pcib3 > xhci0: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe400000-0xfe407fff irq > 46 at device 0.0 on pci3 > xhci0: 32 byte context size. > usbus0 on xhci0 > pcib4: <ACPI PCI-PCI bridge> irq 53 at device 7.0 on pci0 > pci4: <ACPI PCI bus> on pcib4 > xhci1: <ASMedia ASM1042 USB 3.0 controller> mem 0xfe300000-0xfe307fff irq > 50 at device 0.0 on pci4 > xhci1: 32 byte context size. > usbus1 on xhci1 > pcib5: <ACPI PCI-PCI bridge> irq 53 at device 9.0 on pci0 > pci5: <ACPI PCI bus> on pcib5 > ath0: <Atheros AR938x> mem 0xfe200000-0xfe21ffff irq 48 at device 0.0 on > pci5 > ar9300_set_stub_functions: setting stub functions > ar9300_set_stub_functions: setting stub functions > ar9300_attach: calling ar9300_hw_attach > ar9300_hw_attach: calling ar9300_eeprom_attach > ar9300_flash_map: unimplemented for now > Restoring Cal data from DRAM > Restoring Cal data from EEPROM > ar9300_hw_attach: ar9300_eeprom_attach returned 0 > ath0: RX status length: 48 > ath0: RX buffer size: 4096 > ath0: TX descriptor length: 128 > ath0: TX status length: 36 > ath0: TX buffers per descriptor: 4 > ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0 > ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries > ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries > ath0: [HT] enabling HT modes > ath0: [HT] enabling short-GI in 20MHz mode > ath0: [HT] 1 stream STBC receive enabled > ath0: [HT] 1 stream STBC transmit enabled > ath0: [HT] 3 RX streams; 3 TX streams > ath0: AR9380 mac 448.3 RF5110 phy 0.0 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 > ahci0: <ATI IXP700 AHCI SATA controller> port > 0xf040-0xf047,0xf030-0xf033,0xf020-0xf027,0xf010-0xf013,0xf000-0xf00f mem > 0xfe50b000-0xfe50b3ff irq 19 at device 17.0 on pci0 > ahci0: AHCI v1.20 with 3 6Gbps ports, Port Multiplier supported > ahcich0: <AHCI channel> at channel 0 on ahci0 > ahcich2: <AHCI channel> at channel 2 on ahci0 > ahcich5: <AHCI channel> at channel 5 on ahci0 > ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe50a000-0xfe50afff irq > 18 at device 18.0 on pci0 > usbus2 on ohci0 > ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe509000-0xfe5090ff > irq 17 at device 18.2 on pci0 > usbus3: EHCI version 1.0 > usbus3 on ehci0 > ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe508000-0xfe508fff irq > 20 at device 19.0 on pci0 > usbus4 on ohci1 > ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe507000-0xfe5070ff > irq 21 at device 19.2 on pci0 > usbus5: EHCI version 1.0 > usbus5 on ehci1 > pci0: <serial bus, SMBus> at device 20.0 (no driver attached) > pci0: <multimedia, HDA> at device 20.2 (no driver attached) > isab0: <PCI-ISA bridge> at device 20.3 on pci0 > isa0: <ISA bus> on isab0 > pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0 > pci6: <ACPI PCI bus> on pcib6 > re1: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port > 0xd100-0xd1ff mem 0xfe141000-0xfe1410ff irq 20 at device 5.0 on pci6 > re1: Chip rev. 0x10000000 > re1: MAC rev. 0x00000000 > miibus1: <MII bus> on re1 > rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1 > rgephy1: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, > 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, > 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, > 1000baseT-FDX-flow-master, auto, auto-flow > re1: Ethernet address: 00:14:d1:25:d8:23 > re2: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port > 0xd000-0xd0ff mem 0xfe140000-0xfe1400ff irq 21 at device 6.0 on pci6 > re2: Chip rev. 0x10000000 > re2: MAC rev. 0x00000000 > miibus2: <MII bus> on re2 > rgephy2: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus2 > rgephy2: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, > 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, > 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, > 1000baseT-FDX-flow-master, auto, auto-flow > re2: Ethernet address: 00:14:d1:25:d8:44 > ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe506000-0xfe506fff irq > 18 at device 20.5 on pci0 > usbus6 on ohci2 > ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe505000-0xfe505fff irq > 22 at device 22.0 on pci0 > usbus7 on ohci3 > ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe504000-0xfe5040ff > irq 23 at device 22.2 on pci0 > usbus8: EHCI version 1.0 > usbus8 on ehci2 > acpi_button0: <Power Button> on acpi0 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > ppc0: cannot reserve I/O port range > acpi_throttle0: <ACPI CPU Throttling> on cpu0 > hwpstate0: <Cool`n'Quiet 2.0> on cpu0 > acpi_throttle1: <ACPI CPU Throttling> on cpu1 > acpi_throttle1: failed to attach P_CNT > device_attach: acpi_throttle1 attach returned 6 > acpi_throttle2: <ACPI CPU Throttling> on cpu2 > acpi_throttle2: failed to attach P_CNT > device_attach: acpi_throttle2 attach returned 6 > acpi_throttle3: <ACPI CPU Throttling> on cpu3 > acpi_throttle3: failed to attach P_CNT > device_attach: acpi_throttle3 attach returned 6 > ZFS filesystem version: 5 > ZFS storage pool version: features support (5000) > Timecounters tick every 1.000 msec > usbus0: 5.0Gbps Super Speed USB v3.0 > usbus1: 5.0Gbps Super Speed USB v3.0 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 480Mbps High Speed USB v2.0 > usbus4: 12Mbps Full Speed USB v1.0 > usbus5: 480Mbps High Speed USB v2.0 > usbus6: 12Mbps Full Speed USB v1.0 > usbus7: 12Mbps Full Speed USB v1.0 > usbus8: 480Mbps High Speed USB v2.0 > ugen0.1: <0x1b21> at usbus0 > uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 > ugen3.1: <ATI> at usbus3 > uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 > ugen2.1: <ATI> at usbus2 > uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > ugen1.1: <0x1b21> at usbus1 > uhub3: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 > ugen6.1: <ATI> at usbus6 > uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6 > ugen5.1: <ATI> at usbus5 > uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 > ugen4.1: <ATI> at usbus4 > uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > ugen8.1: <ATI> at usbus8 > uhub7: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8 > ugen7.1: <ATI> at usbus7 > uhub8: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 > ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 > ada0: <MDT MD400JD-00LSA0 06.01D06> ATA-7 SATA 1.x device > ada0: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) > ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad4 > ada1 at ahcich2 bus 0 scbus1 target 0 lun 0 > ada1: <MDT MD400JD-00MSA1 10.01E01> ATA-7 SATA 1.x device > ada1: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) > ada1: Command Queueing enabled > ada1: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C) > ada1: Previously was known as ad6 > ada2 at ahcich5 bus 0 scbus2 target 0 lun 0 > ada2: <MDT MD400JS-00MHB0 02.01C03> ATA-7 SATA 1.x device > ada2: 150.000MB/s transfers (SATA 1.x, UDMA6, PIO 8192bytes) > ada2: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C) > ada2: Previously was known as ad8 > SMP: AP CPU #1 Launched! > SMP: AP CPU #2 Launched! > SMP: AP CPU #3 Launched! > Timecounter "TSC-low" frequency 1800148234 Hz quality 1000 > uhub4: 2 ports with 2 removable, self powered > uhub8: 4 ports with 4 removable, self powered > uhub6: 5 ports with 5 removable, self powered > uhub2: 5 ports with 5 removable, self powered > uhub0: 4 ports with 4 removable, self powered > uhub3: 4 ports with 4 removable, self powered > GEOM: ada2: the secondary GPT table is corrupt or invalid. > GEOM: ada2: using the primary only -- recovery suggested. > GEOM: diskid/DISK-MDT-MCANKK515312: the secondary GPT table is corrupt or > invalid. > GEOM: diskid/DISK-MDT-MCANKK515312: using the primary only -- recovery > suggested. > Root mount waiting for: usbus8 usbus5 usbus3 > Root mount waiting for: usbus8 usbus5 usbus3 > uhub7: 4 ports with 4 removable, self powered > uhub5: 5 ports with 5 removable, self powered > uhub1: 5 ports with 5 removable, self powered > Trying to mount root from zfs:Puffy []... > ugen4.2: <Razer> at usbus4 > ukbd0: <Razer Razer BlackWidow, class 0/0, rev 2.00/2.00, addr 2> on usbus4 > kbd2 at ukbd0 > ar9300_Stub_GetCTSTimeout: called > ar9300_Stub_GetCTSTimeout: called > ar9300_Stub_GetAntennaSwitch: called > ar9300_Stub_GetAntennaSwitch: called > wlan0: Ethernet address: 7c:c3:a1:b3:fc:af > uhid0: <Razer Razer BlackWidow, class 0/0, rev 2.00/2.00, addr 2> on usbus4 > uhid1: <Razer Razer BlackWidow, class 0/0, rev 2.00/2.00, addr 2> on usbus4 > root@Border:~ # uptime > 11:20PM up 15:06, 1 user, load averages: 0.34, 0.33, 0.25 > > > > -- > > Sam Fourman Jr. > _______________________________________________ > freebsd-current@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscribe@freebsd.org" The LOR is a false positive. See the comment in sys/ufs/ufs/ufs_dirhash.c Also, switching motherboards is not related to this in any way. You'll eventually hit that LOR report, unless you disabled WITNESS. Thanks, -- Davide "There are no solved problems; there are only problems that are more or less solved" -- Henri Poincare
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CACYV=-E0mGQ401mJ1CbndiJHcv4cj-q0Xckn%2BtOaHCcGUrPvNQ>