Date: Sun, 08 Sep 2019 19:15:55 +0000 From: bugzilla-noreply@freebsd.org To: bugs@FreeBSD.org Subject: [Bug 229745] ahcich: CAM status: Command timeout Message-ID: <bug-229745-227-g73Wm4STya@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-229745-227@https.bugs.freebsd.org/bugzilla/> References: <bug-229745-227@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D229745 Simon G. <semfly@fly777.net> changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |semfly@fly777.net --- Comment #34 from Simon G. <semfly@fly777.net> --- Hello! I have tha same problem. Error=20 WRITE_FPDMA_QUEUED... READ_FPDMA_QUEUED... and etc... OS FreeBSD 11.2-RELEASE-p9 HDD Drives # camcontrol devlist <WDC WD10EZRZ-00HTKB0 01.01A01> at scbus0 target 0 lun 0 (ada0,pass0) <WDC WD10EZRZ-00HTKB0 01.01A01> at scbus1 target 0 lun 0 (ada1,pass1) <WDC WD10EZRX-00D8PB0 80.00A80> at scbus2 target 0 lun 0 (ada2,pass2) <WDC WD10EZRX-00D8PB0 80.00A80> at scbus3 target 0 lun 0 (ada3,pass3) Controller SATA Marvell 88SE9230, FG-EST14A-1-BU01, Espada 4 internal SATA 6Gb/s ports https://static.nix.ru/autocatalog/controllers_Espada/189135_2254_draft.jpg # pciconf -lv ahci0@pci0:1:0:0: class=3D0x010601 card=3D0x92301b4b chip=3D0x92301b4= b rev=3D0x11 hdr=3D0x00 vendor =3D 'Marvell Technology Group Ltd.' device =3D '88SE9230 PCIe SATA 6Gb/s Controller' class =3D mass storage subclass =3D SATA # zpool status -v pool: z4000 state: ONLINE scan: none requested config: NAME STATE READ WRITE CKSUM z4000 ONLINE 0 0 0 raidz1-0 ONLINE 0 0 0 ada0 ONLINE 0 0 0 ada1 ONLINE 0 0 0 ada2 ONLINE 0 0 0 ada3 ONLINE 0 0 0 errors: No known data errors - - - Solution for WD Hard Disk Drives I use program WDIdle3 under DOS and turn off parking heads. https://support.wdc.com/downloads.aspx?p=3D113 Enter BIOS and change Mode from AHCI on controller on IDE or Compatible And one more and IMPORTAND!!! For the duration of the program WDIdle3. Connected to controller only disks for change idle time. Because utility WDIdle3 changing all HDD which conneted on controller. Using wdidle3 /r - current configuration ilde time on disk wdidle3 /d - turn off idle time (I use this option) wdidle3 /s50 - set time 50 secons (you can use 20, 30, 40 or above, read ma= nual please) wdidle3 /? - help for program - - - Turn off idle timer. Work fine. Speed when use rsync 320 - 340 Megabytes per second. No error in system log. P.S. HGST and WD the same brend and one technology and i thinks work this soluti= on too. --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-229745-227-g73Wm4STya>