Date: Thu, 4 Oct 2001 04:19:16 -0700 (PDT) From: felipe <felipe@felipe.maledet.to> To: freebsd-gnats-submit@FreeBSD.org Subject: i386/31035: Smart Array & SMP Message-ID: <200110041119.f94BJGa48540@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 31035
>Category: i386
>Synopsis: Smart Array & SMP
>Confidential: no
>Severity: serious
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Oct 04 04:20:01 PDT 2001
>Closed-Date:
>Last-Modified:
>Originator: felipe
>Release: FreeBSD 4.4-RELEASE
>Organization:
none
>Environment:
FreeBSD xxx.xxx.xx 4.4-RELEASE FreeBSD 4.4-RELEASE #4: Mon Oct 1 17:18:08 CEST 2001 root@xxx.xx:/usr/src/sys/compile/MAILFAX i386
>Description:
I just installed a 4.4-RELEASE from cd on a Compaq Proliant 1600 dual processor.
All seems correct and the installation goes perfect, but when I recompile the kernel with the SMP enabled and i boot with the new kernel the system hang when try to mount the / device.
Here is the dmesg without SMP, I can't debug this because I'm far from the phisical location of the server:
------------
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #4: Mon Oct 1 17:18:08 CEST 2001
root@mailfax.csi.telecomitalia.it:/usr/src/sys/compile/MAILFAX
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (448.81-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x652 Stepping = 2 Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 536870912 (524288K bytes)
avail memory = 518991872 (506828K bytes)
Preloaded elf kernel "kernel" at 0xc038f000.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> on motherboard
pci0: <PCI bus> on pcib0
pci0: <Cirrus Logic GD5446 SVGA controller> at 11.0
pcib1: <DEC 21150 PCI-PCI bridge> at device 13.0 on pci0
pci1: <PCI bus> on pcib1
tl0: <Compaq Netelligent 10/100 Proliant> port 0x3800-0x380f mem 0xc6efddf0-0xc6efddff irq 9 at device 7.0 on pci1
tl0: Ethernet address: 00:50:8b:8b:1b:e6
miibus0: <MII bus> on tl0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy0: <ThunderLAN 10baseT media interface> on miibus0
tlphy0: 10base2/BNC, 10base5/AUI
sym0: <875> port 0x3000-0x30ff mem 0xc6eff000-0xc6efffff,0xc6efdf00-0xc6efdfff irq 10 at device 9.0 on pci1
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x3400-0x34ff mem 0xc6efe000-0xc6efefff,0xc6efde00-0xc6efdeff irq 11 at device 9.1 on pci1
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 14.0
pcib2: <IBM 82351 PCI-PCI bridge> at device 15.0 on pci0
pci2: <PCI bus> on pcib2
ida0: <Compaq Smart Array 221 controller> port 0x4000-0x40ff mem 0xb8000000-0xbfffffff,0xc6ffff00-0xc6ffffff irq 15 at device 0.0 on pci2
ida0: drives=1 firm_rev=4.16
idad0: <Compaq Logical Drive> on ida0
idad0: 17351MB (35536800 sectors), blocksize=512
tl1: <Compaq Netelligent 10/100> port 0x2000-0x200f mem 0xc6dfeef0-0xc6dfeeff irq 5 at device 18.0 on pci0
tl1: Ethernet address: 00:08:c7:84:a1:a8
miibus1: <MII bus> on tl1
nsphy1: <DP83840 10/100 media interface> on miibus1
nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlphy1: <ThunderLAN 10baseT media interface> on miibus1
tlphy1: 10base2/BNC, 10base5/AUI
isab0: <Intel 82371AB PCI to ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf100-0xf10f at device 20.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 20.2 irq 0
chip1: <Intel 82371AB Power management controller> at device 20.3 on pci0
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0689 (System Board)> on eisa0 slot 0
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: cannot reserve I/O port range
DUMMYNET initialized (010124)
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 100 packets/entry by default
IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled
acd0: CDROM <COMPAQ CDR-8435> at ata0-slave using PIO4
Waiting 25 seconds for SCSI devices to settle
sa0 at sym1 bus 0 target 6 lun 0
sa0: <COMPAQ SDT-7000 3.04> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 15)
Mounting root from ufs:/dev/idad0s1a
---------
I'm glad to help if needed.
felipe.
>How-To-Repeat:
Just enable smp on a proliant with smart array 221 and the machine can't boot, it hang when mount /.
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200110041119.f94BJGa48540>