Date: Wed, 16 May 2001 14:19:23 -0400 From: Vivek Khera <khera@kcilink.com> To: David Greenman <dg@root.com> Cc: stable@freebsd.org Subject: Re: dual fxp ethernet, one doesn't "work" Message-ID: <15106.50347.534535.371112@onceler.kciLink.com> In-Reply-To: <20010516110005.B19893@nexus.root.com> References: <15105.44534.131385.573668@onceler.kciLink.com> <x78zjx9oww.fsf@onceler.kciLink.com> <20010516104821.A19893@nexus.root.com> <15106.49026.452840.353024@onceler.kciLink.com> <20010516110005.B19893@nexus.root.com>
index | next in thread | previous in thread | raw e-mail
>>>>> "DG" == David Greenman <dg@root.com> writes:
DG> We'll need the same output from the other machines involved as well.
Ok... three machines specified below.
the *-prv names refer to the 192.168.100 net, the regular names are
the 192.168.200 net.
m02 is the problem host. It can ping/nfs mount/etc from lorax (de0),
but not from lorax-prv (sis0). d01-prv (fxp0) can ping/nfs mount/etc
from lorax-prv (sis0).
The curious thing is that m02-prv (fxp1) sees the traffic from d01-prv
to lorax-prv, but just can't reply to any of it. When I send traffic
via m02-prv (fxp1) I see the blinky light on the hub indicating
traffic on that port; it just doesn't show up anywhere else under
tcpdump.
lorax:
[lorax]% netstat -rna
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.200.2 UGSc 3 0 de0
127.0.0.1 127.0.0.1 UH 2 52 lo0
192.168.100 link#2 UC 0 0 sis0 =>
192.168.100.128 0:b0:d0:e1:4d:76 UHLW 1 87 sis0 725
192.168.200 link#1 UC 0 0 de0 =>
192.168.200.2 0:2:e3:4:14:6 UHLW 5 166 de0 889
192.168.200.65 0:b0:d0:e1:34:de UHLW 0 1 de0 664
204.117.82.15 192.168.200.2 UGHW3 0 4 de0 3067
216.194.193.105 192.168.200.2 UGHW3 0 8 de0 3070
216.194.193.106 192.168.200.2 UGHW 2 8 de0
[lorax]% ifconfig -a
de0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.200.200 netmask 0xffffff00 broadcast 192.168.200.255
ether 00:00:f8:03:1e:19
media: 100baseTX status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP
sis0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.100.200 netmask 0xffffff00 broadcast 192.168.100.255
ether 00:02:e3:15:61:04
media: autoselect (10baseT/UTP) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP none
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
m02:
[m02]% netstat -rna
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
127.0.0.1 127.0.0.1 UH 1 11 lo0
192.168.100 link#2 UC 0 0 fxp1 =>
192.168.200 link#1 UC 2 0 fxp0 =>
192.168.200.2 0:2:e3:4:14:6 UHLW 1 21 fxp0 1197
192.168.200.200 0:0:f8:3:1e:19 UHLW 0 7 fxp0 973
[m02]% ifconfig -a
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.200.65 netmask 0xffffff00 broadcast 192.168.200.255
ether 00:b0:d0:e1:34:de
media: autoselect (100baseTX) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback>
fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.100.2 netmask 0xffffff00 broadcast 192.168.100.255
ether 00:b0:d0:e1:34:df
media: autoselect (10baseT/UTP) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
d01-prv (only single-homed)
[d01]% netstat -rna
Routing tables
Internet:
Destination Gateway Flags Refs Use Netif Expire
127.0.0.1 127.0.0.1 UH 2 8 lo0
192.168.100 link#1 UC 1 0 fxp0 =>
192.168.100.200 0:2:e3:15:61:4 UHLW 1 50 fxp0 996
[d01]% ifconfig -a
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet 192.168.100.128 netmask 0xffffff00 broadcast 192.168.100.255
ether 00:b0:d0:e1:4d:76
media: autoselect (10baseT/UTP) status: active
supported media: autoselect 100baseTX <full-duplex> 100baseTX 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
home |
help
Want to link to this message? Use this
URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15106.50347.534535.371112>