Date: Wed, 03 Jun 2015 22:36:30 -0700 From: Rui Paulo <rpaulo@me.com> To: Ben Woods <woodsb02@gmail.com> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org>, dchagin@freebsd.org, adrian@freebsd.org Subject: Re: Intel 3160/7260/7265 driver Message-ID: <15089990.yCYE9Adp01@akita> In-Reply-To: <CAOc73CChm1vJczABSSsxsbNvsZEdm9H46a_TNNK6fasBOF78JQ@mail.gmail.com> References: <CAOc73CChm1vJczABSSsxsbNvsZEdm9H46a_TNNK6fasBOF78JQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Wednesday 03 June 2015 18:44:59 Ben Woods wrote: > On Sun, May 10, 2015 at 09:48:51AM -0700, Rui Paulo wrote: > > Hi, > > > > I've ported the OpenBSD iwm driver and it's sort of working now: > > > > https://github.com/rpaulo/iwm > > > > Some issues: > > - scanning is sort of broken now, so you must set the channel with > > ifconfig > > - ultra debugging mode is activated, so expect a lot of logs. > > > > This still needs quite a bit of work before it can be part of FreeBSD, but > > this email is being sent over iwm. :-) > > > > I only have a 7265, so I'd like people with 3160 or 7260 to try it out. > > Hi, > > Running this driver on my NEC Lavie HZ750 (same hardware as the Lenovo > Lavie) and this is working fine. Thank you so much for your efforts to > date. > > # pciconf -lv > iwm0@pci0:2:0:0: class=0x028000 card=0x52108086 chip=0x095b8086 > rev=0x61 hdr=0x00 > vendor = 'Intel Corporation' > class = network > > > I was using code from http://github.com/rpaulo/iwm: > commit 6d5cbfa58f152180bbf8f6bcda7c63a6a0abc59a > Merge: 74ebc8a 68be4af > Author: Adrian Chadd <adrian@freebsd.org> > Date: Mon Jun 1 22:05:47 2015 -0700 > > > I do get some errors, but the wireless still associates using WPA2 > pre-shared key. Unfortunately, it seems to connect in 802.11b mode, > even though I have tried forcing it to 802.11g or 802.11n modes with > the following entry in /etc/rc.conf: > ifconfig_wlan0="mode 11n country AU channel 11 WPA DHCP" > > > "# service netif restart" gives the following errors: > ifconfig: SIOCSIFMEDIA (media): Device not configured > kernel: iwm0: iwm_load_firmware: chunk 0 of 3 returned error 35 > wpa_supplicant[1662]: ioctl[SIOCS80211, op=26, val=0, arg_len=0]: > Operation not supported > > > # ifconfig > iwm0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290 > ether 34:02:86:34:13:18 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11b > status: associated > wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 > ether 34:02:86:34:13:18 > inet 192.168.1.100 netmask 0xffffff00 broadcast 192.168.1.255 > nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> > media: IEEE 802.11 Wireless Ethernet autoselect mode 11b > status: associated > ssid 17aHindmarshAve channel 11 (2462 MHz 11b) bssid 04:f0:21:14:c9:7d > regdomain ROW country AU authmode WPA2/802.11i privacy ON > deftxkey UNDEF AES-CCM 2:128-bit AES-CCM 3:128-bit txpower 30 bmiss 10 > scanvalid 60 roaming MANUAL > groups: wlan > > > Note that the new Lenovo X1 Carbon gen3 has the same hardware, so > should give similar results. I'm not sure it's doing 11b. It's all firmware based, so it's probably doing 11g, but we're reporting it incorrectly. -- Rui Paulo
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15089990.yCYE9Adp01>