Date: Fri, 23 Jan 2004 17:50:16 -0800 (PST) From: Mark Rutherford <mark@justirc.net> To: freebsd-sparc64@FreeBSD.org Subject: Re: sparc64/60300: Constant kernel messages: calcru: negative time of -962594 usec for pid 7622 (ls) Message-ID: <200401240150.i0O1oGnM086705@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR sparc64/60300; it has been noted by GNATS.
From: Mark Rutherford <mark@justirc.net>
To: freebsd-gnats-submit@FreeBSD.org, freebsd@stenstad.net
Cc:
Subject: Re: sparc64/60300: Constant kernel messages: calcru: negative time of -962594 usec for pid 7622 (ls)
Date: Fri, 23 Jan 2004 20:43:56 -0500
I installed FreeBSD 5.2 -RELEASE on an old celeron with a small disk.
observed the same behavior as this report.
the machine will lock up at random, ect.
i do not have a serial cable to provide more info via a serial port.
I can provide any info about this as needed to fix it, tho
I hope this is of some help.
the output of dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #0: Sun Jan 11 04:21:45 GMT 2004
root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a33000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a331f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (333.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 260034560 (247 MB)
avail memory = 242946048 (231 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS MES-N > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 7 entries at 0xc00f0ac0
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xec08-0xec0b on acpi0
acpi_cpu0: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 1 INTA is routed to irq 11
pcib0: slot 3 INTA is routed to irq 10
pcib0: slot 6 INTA is routed to irq 15
agp0: <SIS Generic host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0
on pci0
atapci0: <SiS 620 UDMA66 controller> port
0xd000-0xd00f,0xd400-0xd403,0xd800-0xd807,0xe000-0xe003,0xe400-0xe407 irq 14
at device 0.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown> at device 1.1 (no driver attached)
ohci0: <SiS 5571 USB controller> mem 0xdf800000-0xdf800fff irq 11 at device
1.2 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <PCI-PCI bridge> at device 2.0 on pci0
pci1: <PCI bus> on pcib1
pcib0: slot 2 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xa800-0xa83f mem
0xde000000-0xde0fffff,0xde800000-0xde800fff irq 10 at device 3.0 on pci0
fxp0: Ethernet address 00:e0:18:01:65:06
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <multimedia, audio> at device 6.0 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 333370975 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc2d0a760
ad0: 2441MB <WDC AC32500H> [4960/16/63] at ata0-master WDMA2
Mounting root from ufs:/dev/ad0s1a
calcru: negative time of -1950986 usec for pid 54 (rcorder)
calcru: negative time of -1195529 usec for pid 69 (sysctl)
calcru: negative time of -641869 usec for pid 58 (sh)
calcru: negative time of -664837 usec for pid 75 (sh)
calcru: negative time of -665933 usec for pid 77 (sh)
calcru: negative time of -663495 usec for pid 81 (sh)
calcru: negative time of -1267344 usec for pid 90 (fsck_ufs)
calcru: negative time of -677471 usec for pid 111 (rm)
calcru: negative time of -677377 usec for pid 113 (rm)
calcru: negative time of -672541 usec for pid 125 (chmod)
calcru: negative time of -677325 usec for pid 128 (rm)
calcru: negative time of -675387 usec for pid 129 (rm)
calcru: negative time of -680332 usec for pid 130 (sh)
calcru: negative time of -676421 usec for pid 135 (sysctl)
calcru: negative time of -673619 usec for pid 149 (dd)
calcru: negative time of -674154 usec for pid 153 (dd)
calcru: negative time of -673291 usec for pid 155 (dd)
calcru: negative time of -673398 usec for pid 162 (cat)
calcru: negative time of -1305154 usec for pid 144 (sh)
calcru: negative time of -1345889 usec for pid 94 (sh)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200401240150.i0O1oGnM086705>