Date: Mon, 12 Apr 2004 18:46:11 +0200 From: Bohdan Horst <nexus@irc.pl> To: freebsd-mobile@freebsd.org Cc: freebsd-current@freebsd.org Subject: Re: [patch] Xircom REM56G-100 Message-ID: <20040412164611.GA37010@essus.net> In-Reply-To: <20040412155753.382FE5D08@ptavv.es.net> References: <20040412.094255.116837223.imp@bsdimp.com> <20040412155753.382FE5D08@ptavv.es.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Apr 12, 2004 at 08:57:53AM -0700, Kevin Oberman wrote:
> > Date: Mon, 12 Apr 2004 09:42:55 -0600 (MDT)
> > From: "M. Warner Losh" <imp@bsdimp.com>
> > Sender: owner-freebsd-mobile@freebsd.org
> >
> > In message: <20040412153510.GA400@tuatara.fishballoon.org>
> > Scott Mitchell <scott+freebsd@fishballoon.org> writes:
> > : > I hope you work for this problem. BTW, Does a xircom multi-function card
> > : > work now?
> > :
> > : Not on OLDCARD, but nothing has changed there. I believe they should work
> > : on NEWCARD, but I confess I have no idea how to configure that.
> >
> > Multifunctions in NEWCARD only works for true multifunction cards.
> > Xircom cards aren't quite true MFC, as defined in the PCMCIA Standard,
> > so don't work yet.
>
> Odd. At one time (last fall) I was able to run both the Ethernet and
> modem on my RBEM56G-100 card just fine. Sometime between then and last
> month, it stopped working. (RBEM56G-100 is the CardBus version of the
> REM56G-100 PCCard.) The Ethernet still works, but I really don't need
> that part. Maybe I should break down and get a PCMCIA modem card, but
> I'm afraid that I will get stuck with a WinModem.
Odd.. on my RBEM56G-100 works only modem .. (and i need eth) :)
Thinkpad 600X
Apr 3 19:19:17 aristo kernel: FreeBSD 5.2.1-RELEASE-p4 #1: Sat Apr 3
18:57:30 CEST 2004
[...]
Apr 3 19:19:17 aristo kernel: Preloaded elf module "/boot/kernel/if_xe.ko" at 0xc0757420.
[...]
Apr 3 19:19:17 aristo kernel: Preloaded elf module "/boot/kernel/cbb.ko" at 0xc07578c4.
Apr 3 19:19:17 aristo kernel: Preloaded elf module "/boot/kernel/exca.ko" at 0xc075796c.
Apr 3 19:19:17 aristo kernel: Preloaded elf module "/boot/kernel/pccard.ko" at 0xc0757a18.
Apr 3 19:19:17 aristo kernel: Preloaded elf module "/boot/kernel/cardbus.ko" at 0xc0757ac4.
[...]
Apr 3 19:19:17 aristo kernel: cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 9 at device 2.1 on pci0
Apr 3 19:19:17 aristo kernel: cardbus1: <CardBus bus> on cbb1
Apr 3 19:19:17 aristo kernel: pccard1: <16-bit PCCard bus> on cbb1
Apr 3 19:19:17 aristo kernel: cbb1: [MPSAFE]
[...]
Apr 3 19:19:18 aristo kernel: cardbus1: <network, ethernet> at device 0.0 (no driver attached)
Apr 3 19:19:18 aristo kernel: sio4: <Xircom Cardbus modem> port 0x1000-0x1007 mem 0x20000000-0x200007ff,0x20000800-0x20000fff irq 9 at device 0.1 on cardbus1
Apr 3 19:19:18 aristo kernel: sio4: type 16550A
Apr 3 19:19:18 aristo kernel: sio4: unable to activate interrupt in fast mode - using normal mode
[...]
ep0,ed0 works fine:
Apr 9 09:59:12 aristo kernel: ep0: <3Com Corporation 3C589> at port 0x100-0x10f irq 9 function 0 config 1 on pccard1
Feb 23 10:05:39 aristo kernel: ed0: <PCMCIA Ethernet Card> at port 0x300-0x31f irq 9 function 0 config 32 on pccard1
best regards
--
/ irl: Bohdan 'Nexus' Horst | irc: Nexus \
{----------------------v-------^---------------}
\ http://irc.pl/nexus | mailto: nexus&irc.pl /
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20040412164611.GA37010>