Date: Tue, 22 Jul 2003 09:12:11 -0600 From: Scott Long <scottl@freebsd.org> To: Lawrence Farr <bsd-current@epcdirect.co.uk> Cc: current@FreeBSD.org Subject: Re: Adaptec AIC7902 Ultra320 Problems Message-ID: <3F1D544B.3000808@freebsd.org> In-Reply-To: <000001c3504c$0883fc70$c806a8c0@lfarr> References: <000001c3504c$0883fc70$c806a8c0@lfarr>
next in thread | previous in thread | raw e-mail | index | archive | help
Lawrence Farr wrote: > I have a Supermicro SuperServer 6013P-8, with: > > ahd0: <Adaptec AIC7902 Ultra320 SCSI adapter> port > 0x4000-0x40ff,0x4400-0x44ff mem 0xfc300000-0xfc301fff irq 5 at device 2.0 on > pci3 > aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs > ahd1: <Adaptec AIC7902 Ultra320 SCSI adapter> port > 0x4800-0x48ff,0x4c00-0x4cff mem 0xfc302000-0xfc303fff irq 5 at device 2.1 on > pci3 > aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs > > Trying to install 5.1-CURRENT-20030709-JPSNAP or 4.8-STABLE on the > box gives a timeout error that will hang the disk in a state that > resetting the machine does not clear, and only power cycling will > clear. Ive replaced the disks with no change, but installed and > ran Redhat 7.3 on the box with no timeouts or errors. > > The full dmesg is here: > http://aticatac.epcdirect.co.uk/~l.farr/6013P8_dmesg.txt > > And timeout is here: > http://aticatac.epcdirect.co.uk/~l.farr/AIC7902_timeout.txt > > Lawrence Farr > EPC Direct Limited Timeouts usually point to interrupt routing problems. Try booting with ACPI turned off. Scott
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3F1D544B.3000808>