Date: Thu, 30 Nov 1995 15:51:37 +0100 (MET) From: miro siman <siman@nbs.sk> To: questions@freebsd.org Subject: Problems with dump utility Message-ID: <199511301451.PAA00234@chodovar.nbs.sk>
next in thread | raw e-mail | index | archive | help
Hello,
I've got some problems during dumping ( with /sbin/dump ) my
filesystems to SCSI 8mm tape drive. 1st, here is my HW/SW config:
HW: HP Vectra N2 4/66 486 DX2 machine
32MB RAM
AHA-1540CF/1542CF with BIOS v2.01 SCSI adapter
1 GB IBM DPES-31080 S31K SCSI disk
EXABYTE EXB-8500SMBANXH1 0458 8mm SCSI tape drive
WD SMC Ultra eth. card
SW: FreeBSD 2.1.0-RELEASE
When dumping filesystems to tape drive with:
/sbin/dump 0ubdf 32 105000 /dev/nrst0 /dev/sd0s2g <-- /home
OS hangs up with these err. messages on system console:
aha0: MBO 02 and not 00 (free)
sd0(aha0:0:0): timed out
adapter not taking command.. frozen?!
Debugger ("aha1540") called
AGAIN
and dump utility writing these error messages:
DUMP: Date of this level 0 dump: date is here
DUMP; ....
DUMP: Dumping /dev/rsd0s2g (/home) to /dev/rst0
DUMP: mapping (Pass I) [regular files]
DUMP: mapping (Pass II) [ directories]
DUMP: estimated xxxxxxx tape blocks on 0,xx tape(s)
DUMP: dumping (Pass III) [directories]
DUMP: read error from /dev/rsd0s2g: Input/output error: \
[sector 36592]: count=2048
After these messages i'm forced to use HW reset to reboot system.
Any suggestions would be most appreciated
Thanks, miro
--
Miroslav Siman
National Bank of Slovakia phone: ++42-7-513-3130
Zahradnicka 153, P.O. Box 27 fax: ++42-7-526-5968
820 09 Bratislava fax box:++42-7-513-6130
Slovak Republic Internet: siman@nbs.sk
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199511301451.PAA00234>