Date: Mon, 1 Jun 2009 19:54:20 +0100 From: Chris Nicholls <chris@timico.net> To: freebsd-questions@freebsd.org Subject: IBM x345 Dual 2.8Ghz Xeon poor performance Message-ID: <20090601185419.GA92199@atsuko>
next in thread | raw e-mail | index | archive | help
Hello List
I recently aquired and IBM eServer x345, which is taking up to 12 hours
to build a kernel! I've spent quite a bit of spare time trawling archives
etc for any hints to the reason why.
Initally I thought it was the disks causing the problem, but the general
usage of the machine and disk I/O is pretty snappy just seems to be CPU
intensive operations where things seem to lag.
I've been using kernel builds as a rough benchmark where an older P3
dual 2.4ghz IBM x330 compiles in about 15min under moderate load.
I've attached the dmesg with a boot -v from the box in question,
any comments would be a great help, also if this is not the best place
to post such questions please let me know so i can better direct it.
Regards
FreeBSD 7.2-RELEASE #0: Fri May 1 08:49:13 UTC 2009
root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0e67000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0e67160.
Calibrating clock(s) ... i8254 clock: 1193158 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2793915192 Hz
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2793.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x4400<CNXT-ID,xTPR>
Instruction TLB: 4 KB, 2 MB or 4 MB pages, fully associative, 128
entries
Data TLB: 4 KB or 4 MB pages, fully associative, 64 entries
1st-level data cache: 8 KB, 4-way set associative, sectored cache, 64
byte line size
Trace cache: 12K-uops, 8-way set associative
2nd-level cache: 512 KB, 8-way set associative, sectored cache, 64 byte
line size
real memory = 2147332096 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009afff, 630784 bytes (154 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x000000007db85fff, 2092306432 bytes (510817 pages)
avail memory = 2091646976 (1994 MB)
Table 'FACP' at 0x7ffdff00
Table 'APIC' at 0x7ffdfe80
MADT: Found table at 0x7ffdfe80
MP Configuration Table version 1.4 found at 0xc009cea0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 6 ACPI ID 1: enabled
SMP: Added CPU 6 (AP)
ACPI APIC Table: <IBM SERONYXP>
INTR: Adding local APIC 6 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 6
bios32: Found BIOS32 Service Directory header at 0xc00fd790
bios32: Entry = 0xfd7a1 (c00fd7a1) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xd7dc
pnpbios: Found PnP BIOS data at 0xc00fdf90
pnpbios: Entry = f0000:444c Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ACPI: RSDP @ 0x0xfdfc0/0x0014 (v 0 IBM )
ACPI: RSDT @ 0x0x7ffdff80/0x0030 (v 1 IBM SERONYXP 0x00001000 IBM
0x45444F43)
ACPI: FACP @ 0x0x7ffdff00/0x0074 (v 1 IBM SERONYXP 0x00001000 IBM
0x45444F43)
ACPI: DSDT @ 0x0x7ffdb300/0x4A26 (v 1 IBM SERGEODE 0x00001000 MSFT
0x0100000B)
ACPI: FACS @ 0x0x7ffdfe40/0x0040
ACPI: APIC @ 0x0x7ffdfe80/0x0076 (v 1 IBM SERONYXP 0x00001000 IBM
0x45444F43)
ACPI: ASF! @ 0x0x7ffdfdc0/0x004B (v 16 IBM SERONYXP 0x00000001 IBM
0x45444F43)
MADT: Found IO APIC ID 14, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 13, Interrupt 16 at 0xfec01000
MADT: Found IO APIC ID 12, Interrupt 32 at 0xfec02000
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 6
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 7 polarity: low
ioapic0: intpin 7 trigger: level
ioapic2 <Version 1.1> irqs 32-47 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic0 <Version 1.1> irqs 0-15 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
wlan_amrr: <AMRR Transmit Rate Control Algorithm>
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (May 1 2009
08:47:24)
npx0: INT 16 interface
acpi0: <IBM SERONYXP> on motherboard
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc50a1000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x80002800
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00141166)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: \\_SB_.PCI0.RCNB -> bus 0 dev 0 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.USB0.CFG2 -> bus 0 dev 15 func 2
AcpiOsDerivePciId: \\_SB_.PCI0.CI10.IOB2 -> bus 0 dev 16 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.CI12.IOB2 -> bus 0 dev 16 func 2
AcpiOsDerivePciId: \\_SB_.PCI0.CI20.IOB2 -> bus 0 dev 17 func 0
AcpiOsDerivePciId: \\_SB_.PCI0.CI22.IOB2 -> bus 0 dev 17 func 2
acpi0: reservation of 460, 2 (4) failed
ACPI timer: 0/3 0/3 0/3 0/3 0/4 0/3 0/3 0/3 0/3 0/3 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x488-0x48b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 9 N 0 9
Validation 0 9 N 0 9
After Disable 0 255 N 0 9
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 10
Validation 0 10 N 0 10
After Disable 0 255 N 0 10
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 3 N 0 3
Validation 0 3 N 0 3
After Disable 0 255 N 0 3
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 5
Validation 0 5 N 0 5
After Disable 0 255 N 0 5
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link19: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link20: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link21: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link22: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link23: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link24: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link25: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link26: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link27: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link28: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link29: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link30: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link31: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 none
Validation 0 255 N 0 none
After Disable 0 255 N 0 none
pci_link32: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 11
Validation 0 11 N 0 11
After Disable 0 255 N 0 11
pcib0: <ACPI Host-PCI bridge> on acpi0
ACPI: Found matching pin for 0.15.INTA at func 2: 11
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1166, dev=0x0014, revid=0x33
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0014, revid=0x00
domain=0, bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0014, revid=0x00
domain=0, bus=0, slot=0, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4752, revid=0x27
domain=0, bus=0, slot=6, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfd000000, size 24,
enabled
map[14]: type I/O Port, range 32, base 0x2400, size 8, enabled
map[18]: type Memory, range 32, base 0xfebff000, size 12,
enabled
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 26
found-> vendor=0x1166, dev=0x0201, revid=0x93
domain=0, bus=0, slot=15, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x2200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0212, revid=0x93
domain=0, bus=0, slot=15, func=1
class=01-01-82, hdrtype=0x00, mfdev=1
cmdreg=0x0155, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type I/O Port, range 32, base 0x700, size 4, enabled
found-> vendor=0x1166, dev=0x0220, revid=0x05
domain=0, bus=0, slot=15, func=2
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0157, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000
ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xfebfe000, size 12,
enabled
pcib0: matched entry for 0.15.INTA (src \\LPUS:0)
ioapic0: Changing trigger for pin 11 to level
ioapic0: Changing polarity for pin 11 to low
pcib0: slot 15 INTA routed to irq 11 via \\LPUS
found-> vendor=0x1166, dev=0x0225, revid=0x00
domain=0, bus=0, slot=15, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0144, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0101, revid=0x05
domain=0, bus=0, slot=16, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0101, revid=0x05
domain=0, bus=0, slot=16, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0101, revid=0x05
domain=0, bus=0, slot=17, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0101, revid=0x05
domain=0, bus=0, slot=17, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0142, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
vgapci0: <VGA-compatible display> port 0x2400-0x24ff mem
0xfd000000-0xfdffffff,0xfebff000-0xfebfffff irq 26 at device 6.0 on pci0
atapci0: <ServerWorks CSB5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x700-0x70f at device 15.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x700
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 49
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 50
ata1: [MPSAFE]
ata1: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfebfe000-0xfebfefff irq 11
at device 15.2 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfebfe000
ohci0: (New OHCI DeviceId=0x02201166)
ioapic0: routing intpin 11 (ISA IRQ 11) to vector 51
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on
usb0
uhub0: 4 ports with 4 removable, self powered
isab0: <PCI-ISA bridge> at device 15.3 on pci0
isa0: <ISA bus> on isab0
pcib1: <ACPI Host-PCI bridge> on acpi0
pci2: <ACPI PCI bus> on pcib1
pci2: domain=0, physical bus=2
pcib2: <ACPI Host-PCI bridge> on acpi0
pci4: <ACPI PCI bus> on pcib2
pci4: domain=0, physical bus=4
pcib3: <ACPI Host-PCI bridge> on acpi0
pci6: <ACPI PCI bus> on pcib3
pci6: domain=0, physical bus=6
found-> vendor=0x8086, dev=0x1010, revid=0x01
domain=0, bus=6, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0
ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfbfe0000, size 17,
enabled
map[20]: type I/O Port, range 32, base 0x2500, size 6, enabled
pcib3: matched entry for 6.8.INTA
pcib3: slot 8 INTA hardwired to IRQ 29
found-> vendor=0x8086, dev=0x1010, revid=0x01
domain=0, bus=6, slot=8, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0
ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfbfc0000, size 17,
enabled
map[20]: type I/O Port, range 32, base 0x2540, size 6, enabled
pcib3: matched entry for 6.8.INTB
pcib3: slot 8 INTB hardwired to IRQ 30
em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2500-0x253f mem
0xfbfe0000-0xfbffffff irq 29 at device 8.0 on pci6
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfe0000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0x2500
ioapic1: routing intpin 13 (PCI IRQ 29) to vector 52
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:0d:60:eb:46:a6
em1: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0x2540-0x257f mem
0xfbfc0000-0xfbfdffff irq 30 at device 8.1 on pci6
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfbfc0000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0x2540
ioapic1: routing intpin 14 (PCI IRQ 30) to vector 53
em1: [FILTER]
em1: bpf attached
em1: Ethernet address: 00:0d:60:eb:46:a7
pcib4: <ACPI Host-PCI bridge> on acpi0
pci8: <ACPI PCI bus> on pcib4
pci8: domain=0, physical bus=8
found-> vendor=0x9005, dev=0x0250, revid=0x02
domain=0, bus=8, slot=2, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x01d6, statreg=0x0230, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x00 (0
ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D3 current D0
MSI supports 2 messages, 64 bit
map[10]: type Memory, range 32, base 0xf3fff000, size 12,
enabled
map[18]: type Prefetchable Memory, range 32, base 0xf4000000,
size 26, enabled
pcib4: matched entry for 8.2.INTA
pcib4: slot 2 INTA hardwired to IRQ 18
ips0: <Adaptec ServeRAID Adapter> mem
0xf3fff000-0xf3ffffff,0xf4000000-0xf7ffffff irq 18 at device 2.0 on pci8
ips0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf3fff000
ioapic1: routing intpin 2 (PCI IRQ 18) to vector 54
ips0: [MPSAFE]
ips0: [ITHREAD]
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 55
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x4801 0x4811 0x4801 0x4801
sio0: irq maps: 0x4801 0x4811 0x4801 0x4801
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 56
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 0: ioport 0xc00 alloc failed
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff pnpid
ORM0000 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0xffffffff (1)
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
psm0: failed to reset the aux device.
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4801 0x4801 0x4801 0x4801
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
ums0: <PIXART USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on
uhub0
ums0: 3 buttons and Z dir.
ukbd0: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 3> on
uhub0
kbd2 at ukbd0
kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000
ums1: <Logitech USB Receiver, class 0/0, rev 1.10/38.10, addr 3> on
uhub0
ums1: 8 buttons and Z dir.
Device configuration finished.
Reducing kern.maxvnodes 134098 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66521798 hz
Timecounter "TSC" frequency 2793915192 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on CSB5 chip
acd0: setting UDMA33 on CSB5 chip
acd0: <CD-224E/2.9B> CDROM drive at ata0 as master
acd0: read 4134KB/s (4134KB/s), 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ips0: resetting adapter, this may take up to 5 minutes
ips0: adapter type: ServeRAID 6i (sebring)
ips0: logical drives: 1
ips0: Logical Drive 0: RAID5 sectors: 213288960, state OK
ipsd0: <Logical Drive> on ips0
ipsd0: Logical Drive (104145MB)
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 4 to local APIC 6
ioapic0: Assigning ISA IRQ 6 to local APIC 0
ioapic0: Assigning ISA IRQ 7 to local APIC 6
ioapic0: Assigning ISA IRQ 11 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 6
ioapic0: Assigning ISA IRQ 15 to local APIC 0
ioapic1: Assigning PCI IRQ 18 to local APIC 6
ioapic1: Assigning PCI IRQ 29 to local APIC 0
ioapic1: Assigning PCI IRQ 30 to local APIC 6
GEOM: new disk ipsd0
GEOM_LABEL: Label for provider ipsd0s1 is ufsid/4a2194d5145e8ebf.
GEOM_LABEL: Label for provider ipsd0s3d is ufsid/4a2194dc937da73e.
GEOM_LABEL: Label for provider ipsd0s3e is ufsid/4a2194d56580c185.
GEOM_LABEL: Label for provider ipsd0s3f is ufsid/4a2194d618b6e472.
Trying to mount root from ufs:/dev/ipsd0s1a
start_init: trying /sbin/init
GEOM_LABEL: Label ufsid/4a2194d5145e8ebf removed.
GEOM_LABEL: Label for provider ipsd0s1 is ufsid/4a2194d5145e8ebf.
GEOM_LABEL: Label ufsid/4a2194d56580c185 removed.
GEOM_LABEL: Label for provider ipsd0s3e is ufsid/4a2194d56580c185.
GEOM_LABEL: Label ufsid/4a2194d618b6e472 removed.
GEOM_LABEL: Label for provider ipsd0s3f is ufsid/4a2194d618b6e472.
GEOM_LABEL: Label ufsid/4a2194dc937da73e removed.
GEOM_LABEL: Label for provider ipsd0s3d is ufsid/4a2194dc937da73e.
GEOM_LABEL: Label ufsid/4a2194d5145e8ebf removed.
GEOM_LABEL: Label ufsid/4a2194d56580c185 removed.
GEOM_LABEL: Label ufsid/4a2194d618b6e472 removed.
GEOM_LABEL: Label ufsid/4a2194dc937da73e removed.
em1: Link is up 100 Mbps Full Duplex
em0: Link is up 1000 Mbps Full Duplex
ukbd0: at uhub0 port 3 (addr 3) disconnected
ukbd0: detached
ums1: at uhub0 port 3 (addr 3) disconnected
ums1: detached
t_delta 15.fefcbbd571062e80 too short
--
_
Chris Nicholls ASCII ribbon campaign ( )
Timico Network Operations - against HTML, vCards and X
chris@timico.net - proprietary attachments in e-mail / \
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20090601185419.GA92199>