Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 28 Nov 2002 17:09:52 +0100
From:      Harald Hanche-Olsen <hanche@math.ntnu.no>
To:        freebsd-hardware@FreeBSD.ORG
Subject:   pcm0: unable to map register space
Message-ID:  <20021128170952N.hanche@math.ntnu.no>

next in thread | raw e-mail | index | archive | help
----Next_Part(Thu_Nov_28_17:09:45_2002_809)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 8bit

I recently got a new computer in my office.  Unfortunately, I can't
get the sound card to work!  The machine has a built-in sound card
which is apparently unsupported by FreeBSD, so I disabled it in the
BIOS and moved the sound card from the previous computer, where it
worked fine with FreeBSD, to the new machine.

Here is what dmesg says:

pcm0: <AudioPCI ES1373-B> at device 10.0 on pci2
pcm0: unable to map register space
device_probe_and_attach: pcm0 attach returned 6

And here is what pciconf -l -v says about the card:

none3@pci2:10:0:        class=0x040100 card=0x13711274 chip=0x13711274 rev=0x06 
hdr=0x00
    vendor   = 'Ensoniq (Creative)'
    device   = 'ES1371, ES1373 AudioPCI'
    class    = multimedia
    subclass = audio

(Sorry, I am a bit vague about exactly what sound card this is - I
just picked it out of a pile of unused sound cards a while back, and
as I said it worked fine in my previous FreeBSD machine.)

I do have "options PNPBIOS" and "device pcm" (no extra arguments) in
the kernel config.

I'm beginning to understand why it's called "plug and pray"...

I tried turning off everything I am not using in the BIOS, such as the
parallel port and the game port.  Didn't make a difference.

Any suggestions as to what I could try next, or what information I
could provide that would help?

I attach a copy of dmesg.boot and the output of pciconf -l -v.  And
BTW, the motherboard is supposed to be an Asus P4B533-VM.

- Harald

----Next_Part(Thu_Nov_28_17:09:45_2002_809)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 8bit
Content-Disposition: attachment; filename="dmesg.boot"

Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.6.2-RELEASE #0: Thu Nov 28 15:42:55 CET 2002
    root@fiinbeck.math.ntnu.no:/usr/src/sys/compile/FIINBECK
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium 4 (2017.98-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf24  Stepping = 4
  Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,<b28>,ACC>
real memory  = 536846336 (524264K bytes)
avail memory = 518082560 (505940K bytes)
Preloaded elf kernel "kernel" at 0xc042d000.
md0: Malloc disk
Using $PIR table, 8 entries at 0xc00f2370
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=2561)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G550 AGP graphics accelerator> at 0.0 irq 11
uhci0: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 11 at device 29.0 on pci0
uhci0: (New UHCI DeviceId=0x24c28086)
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: (0x24c28086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xd400-0xd41f irq 3 at device 29.1 on pci0
uhci1: (New UHCI DeviceId=0x24c48086)
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: (0x24c48086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0xd000-0xd01f irq 10 at device 29.2 on pci0
uhci2: (New UHCI DeviceId=0x24c78086)
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: (0x24c78086) UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
fxp0: <Intel Pro/100 Ethernet> port 0xb800-0xb83f mem 0xeb800000-0xeb800fff irq 7 at device 8.0 on pci2
fxp0: Ethernet address 00:e0:18:93:f1:6f
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <AudioPCI ES1373-B> at device 10.0 on pci2
pcm0: unable to map register space
device_probe_and_attach: pcm0 attach returned 6
isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 10 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
orm0: <Option ROMs> at iomem 0xc0000-0xc8fff,0xcc000-0xcd7ff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0f13> can't assign resources
unknown: <PNP0000> can't assign resources
unknown: <PNP0303> can't assign resources
unknown: <PNP0c02> can't assign resources
IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to accept, logging limited to 100 packets/entry by default
ad0: 38166MB <ST340016A> [77545/16/63] at ata0-master BIOSDMA
acd0: DVD-ROM <AOPEN 16XDVD-ROM/AMH 20011108> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a

----Next_Part(Thu_Nov_28_17:09:45_2002_809)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 8bit
Content-Disposition: attachment; filename="pciconf.out"

chip0@pci0:0:0:	class=0x060000 card=0x80931043 chip=0x25608086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82845G/GL System Controller & Host-Hub Interface Bridge'
    class    = bridge
    subclass = HOST-PCI
pcib1@pci0:1:0:	class=0x060400 card=0x00000000 chip=0x25618086 rev=0x01 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82845G/GL Host-to-AGP Bridge'
    class    = bridge
    subclass = PCI-PCI
uhci0@pci0:29:0:	class=0x0c0300 card=0x80891043 chip=0x24c28086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) USB UHCI Controller #1'
    class    = serial bus
    subclass = USB
uhci1@pci0:29:1:	class=0x0c0300 card=0x80891043 chip=0x24c48086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) USB UHCI Controller #2'
    class    = serial bus
    subclass = USB
uhci2@pci0:29:2:	class=0x0c0300 card=0x80891043 chip=0x24c78086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) USB UHCI Controller #3'
    class    = serial bus
    subclass = USB
none0@pci0:29:7:	class=0x0c0320 card=0x80891043 chip=0x24cd8086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) USB EHCI Controller'
    class    = serial bus
    subclass = USB
pcib2@pci0:30:0:	class=0x060400 card=0x00000000 chip=0x244e8086 rev=0x81 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BA/CA/DB (ICH2/3/4) Hub Interface to PCI Bridge (244E)'
    class    = bridge
    subclass = PCI-PCI
isab0@pci0:31:0:	class=0x060100 card=0x00000000 chip=0x24c08086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) LPC Interface Bridge'
    class    = bridge
    subclass = PCI-ISA
atapci0@pci0:31:1:	class=0x01018a card=0x80891043 chip=0x24cb8086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) UltraATA/100 EIDE Controller'
    class    = mass storage
    subclass = ATA
none1@pci1:0:0:	class=0x030000 card=0x0f84102b chip=0x2527102b rev=0x01 hdr=0x00
    vendor   = 'Matrox Graphics Inc'
    device   = 'MGA-G550 AGP Chipset'
    class    = display
    subclass = VGA
fxp0@pci2:8:0:	class=0x020000 card=0x80711043 chip=0x103a8086 rev=0x81 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB (ICH4) LAN Controller with 82562ET/EZ (CNR) PHY'
    class    = network
    subclass = ethernet
none2@pci2:10:0:	class=0x040100 card=0x13711274 chip=0x13711274 rev=0x06 hdr=0x00
    vendor   = 'Ensoniq (Creative)'
    device   = 'ES1371, ES1373 AudioPCI'
    class    = multimedia
    subclass = audio

----Next_Part(Thu_Nov_28_17:09:45_2002_809)----

To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20021128170952N.hanche>