Date: Sun, 17 Sep 2000 20:35:21 +0100 From: simond@irrelevant.org To: freebsd-stable@freebsd.org Subject: Problems with tx0 under 4.1S using new MII bus Message-ID: <20000917203521.A41996@irrelevant.org>
next in thread | raw e-mail | index | archive | help
--X1bOJ3K7DJ5YkBrT
Content-Type: text/plain; charset=us-ascii
Hiya, I just did a cvsup today and found that the tx device now requires
the miibus device too, nothing wrong with that, but I do have problems
when booting the then compiled kernel, here's the network card related
big from the dmesg with the new kernel:
tx0: <SMC Etherpower II 10/100> port 0xa400 0xa4ff mem 0xcc000000-0xcc000fff irq 5 at device 10.0 on pci0
miibus0: <MII bus> on tx0
nsphy0: <QS6612 10/100 media interface> on miibus0
nsphy0: 10baseT, 10baseT-FDX, 100baseT, 100baseT-FDX, auto
And at this point the whole machine hangs, I've attached a copy of the
dmesg from the kernel before this change if it helps anyone.
Thanks.
--
Simon Dick simond@irrelevant.org
--X1bOJ3K7DJ5YkBrT
Content-Type: text/plain
Content-Disposition: attachment; filename="dmesg.txt"
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #0: Wed Sep 6 15:08:28 BST 2000
root@adsl.irrelevant.org:/usr/obj/usr/src/sys/SIMOND
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD Athlon(tm) Processor (655.85-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x630 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
AMD Features=0xc0440000<<b18>,AMIE,DSP,3DNow!>
real memory = 268353536 (262064K bytes)
avail memory = 258048000 (252000K bytes)
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
pcib2: <PCI to PCI bridge (vendor=1106 device=8305)> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <Matrox MGA G400 AGP graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C686 PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686 ATA66 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device 4.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xd000-0xd01f irq 9 at device 4.3 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
tx0: <SMC 83c170> port 0xa400-0xa4ff mem 0xcc000000-0xcc000fff irq 5 at device 10.0 on pci0
tx0: address 00:e0:29:0b:d5:31, type SMC9432TX, Auto-Neg 10Mbps
tx0: driver is using old-style compatability shims
pcm0: <AudioPCI ES1371> port 0xa000-0xa03f irq 10 at device 11.0 on pci0
ahc0: <Adaptec 2940A Ultra SCSI adapter> port 0x9800-0x98ff mem 0xcb800000-0xcb800fff irq 11 at device 12.0 on pci0
ahc0: aic7860 Single Channel A, SCSI Id=7, 3/255 SCBs
atapci1: <Promise ATA100 controller> port 0x8000-0x803f,0x8400-0x8403,0x8800-0x8807,0x9000-0x9003,0x9400-0x9407 mem 0xcb000000-0xcb01ffff irq 10 at device 17.0 on pci0
ata2: at 0x9400 on atapci1
ata3: at 0x8800 on atapci1
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IP Filter: v3.4.8 initialized. Default = pass all, Logging = enabled
ata0-master: DMA limited to UDMA33, non-ATA66 compliant cable
ad0: 19574MB <IBM-DPTA-372050> [39770/16/63] at ata0-master using UDMA33
ad1: 10300MB <Maxtor 91080D5> [20928/16/63] at ata0-slave using UDMA33
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-104S 0123> at ata1-master using UDMA33
Waiting 8 seconds for SCSI devices to settle
Mounting root from ufs:ad0s3a
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <YAMAHA CRW4416S 1.0j> Removable CD-ROM SCSI-2 device
cd0: 8.333MB/s transfers (8.333MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
--X1bOJ3K7DJ5YkBrT--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000917203521.A41996>