Date: Wed, 13 Dec 2000 03:43:16 -0800 From: "Ronald F. Guilmette" <rfg@monkeys.com> To: Mike Smith <msmith@freebsd.org> Cc: freebsd-questions@freebsd.org, freebsd-hardware@freebsd.org Subject: Re: Help! "Fatal trap 1: privledged instruction trap" while installing Message-ID: <38028.976707796@monkeys.com> In-Reply-To: Your message of Wed, 13 Dec 2000 03:30:32 -0800. <200012131130.eBDBUW308257@mass.osd.bsdi.com>
next in thread | previous in thread | raw e-mail | index | archive | help
In message <200012131130.eBDBUW308257@mass.osd.bsdi.com>, you wrote:
>>
>> Fry's was having a special on the following pair of components:
>>
>> AMD K6-III 333
>> FIC VA-503+ motherboard
>
>Make sure you have updated the BIOS on this board to the most recent
>version.
I do have.
>> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
>>
>> Fatal trap 1: privledged instruction fault while in vm86 mode
>> instruction pointer = 0xcc00:0x30d3
>
>Looks like you're in the VESA BIOS. Can you boot with -v and give us
>some more details?
There isn't much more info, but here it is:
-------------------------------------------------------------------------
...
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
Fatal trap 1: privledged instruction fault while in vm86 mode
instruction pointer = 0xcc00:0x30d3
stack pointer = 0x0:0xff8
frame pointer = 0x0:0x0
code segment = base 0x0, limit 0x0, type 0x0
= DPL 0, pres 0, def32 0, gran 0
processor eflags = interrupt enabled, resume, vm86, IOPL = 0
current process = 0 (swapper)
interrupt mask = net tty bio cam
trap number = 1
panic: privledged instruction fault
Uptime: 0s
Automatic reboot in 15 seconds - press a key on the console to abort
-------------------------------------------------------------------------
So does that help any? What's going on here?
> What video card are you using?
A cheapie S3-based piece of junk. The brand is `Datona'. (I say ``junk''
because I tried using it with XFree86 before, and I could never get it to
work 100% correctly. I mostly worked, but whenever I moved the mouse, or
whenever there was any change in what appeared on the screen, many thin
horizontal white lines would flash momentarily in seemingly random places
all over the screen. I just chalked it up to crap/cheap electronics and
used another card.)
Should I try swapping the video card out?
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?38028.976707796>