Date: Wed, 15 May 2002 10:12:28 -0400 (EDT) From: "Eric J. Chet" <ejc@bazzle.com> To: Dmitry Morozovsky <marck@rinet.ru> Cc: <stable@freebsd.org> Subject: Re: Tagged IBM ATA drives under nowadays -stable Message-ID: <20020515100822.R47893-200000@gargoyle.bazzle.com> In-Reply-To: <20020515154032.U19317-100000@woozle.rinet.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
Hello
I have a system based on the BX chipset, abit bx6 rev 2 mainboard
which now doesn't work using the tags on a IBM GXP 75 drive.
Regards,
Eric
On Wed, 15 May 2002, Dmitry Morozovsky wrote:
> Dear colleagues,
>
> am I the only unlucky person who stucks with non-working tagged ATA drives
> from IBM with nowadays ata?
>
> All our systems with different chipsets (from Intel TX to VIA K7) with ata
> tags enabled drops to ata timeouts, and then swiths to PIO mode, where
> (partly) successively works.
>
> Soren reports he can't reproduce the problem with his hardware; but, I
> have test box available with serial console and ready to provide access to
> it and would be happy to track down and fix the problem.
>
> Thanks in advance.
>
> Sincerely,
> D.Marck [DM5020, DM268-RIPE, DM3-RIPN]
> ------------------------------------------------------------------------
> *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- marck@rinet.ru ***
> ------------------------------------------------------------------------
>
>
> To Unsubscribe: send mail to majordomo@FreeBSD.org
> with "unsubscribe freebsd-stable" in the body of the message
>
Eric Chet -> echet@cms.cendant.com, ejc@bazzle.com, ejc@kenpo-jujitsu.com
Technical Lead/Architect Cendant Inc. Distributed OO Systems, J2EE, CORBA
Kenpo JuJitsu the Ultimate in Self Defense, Tai Chi for Life
ejc@FreeBSD.org -> "Live Free or Die"
[-- Attachment #2 --]
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.6-PRERELEASE #0: Fri May 10 14:52:34 EDT 2002
ejc@kayman.bazzle.com:/usr/obj/usr/src/sys/kayman
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (451.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x660 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 402653184 (393216K bytes)
avail memory = 387604480 (378520K bytes)
Preloaded elf kernel "kernel" at 0xc03d3000.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdf00
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <Matrox MGA G200 AGP graphics accelerator> at 0.0 irq 5
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 10 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
umass0: SanDisk Corporation ImageMate CompactFlash USB, rev 1.10/0.09, addr 2
umass0: Get Max Lun not supported (STALLED)
umass1: SanDisk Corporation SecureMate USB SD/MMC, rev 1.10/1.09, addr 3
umass1: Get Max Lun not supported (STALLED)
intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 at device 7.3 on pci0
intpm0: I/O mapped 5000
intpm0: intr IRQ 9 enabled revision 0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus general purpose I/O> on smbus0
intpm0: PM I/O mapped 4000
fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xe400-0xe41f mem 0xda000000-0xda0fffff,0xda201000-0xda201fff irq 10 at device 9.0 on pci0
fxp0: Ethernet address 00:a0:c9:5f:db:96
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xda100000-0xda1fffff,0xda200000-0xda200fff irq 11 at device 11.0 on pci0
csa: card is Unknown/invalid SSID (CS4614)
pcm0: <CS461x PCM Audio> on csa0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA33
Mounting root from ufs:/dev/ad0s1a
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SanDisk ImageMate II 1.30> Removable Direct Access SCSI-2 device
da0: 650KB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 1 lun 0
da1: <SanDisk SDDR33USB/SDMMC 1.09> Removable Direct Access SCSI-2 device
da1: 650KB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
pid 421 (kdeinit), uid 1000: exited on signal 11 (core dumped)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020515100822.R47893-200000>