Date: Tue, 14 Jan 1997 11:18:18 -0500 (EST) From: Dev Chanchani <dev@trifecta.com> To: Felipe Rivera Marquez <felipe@informador.com.mx> Cc: freebsd-isp@freebsd.org Subject: Re: SCSI bus reset Message-ID: <Pine.BSF.3.91.970114111701.18601C-100000@www.trifecta.com> In-Reply-To: <Pine.BSF.3.91.961207145429.464C-100000@sunasci.informador.com.mx>
next in thread | previous in thread | raw e-mail | index | archive | help
You may wish to configure the settings on your tape drive in the SCSI bios. Lower the speed at which the scsi bus will talk to this device (on SCSI2 I have it set it 5 MB/s). Dissable Sync Transfer as Tape Drivers will probably not talk synchronously. --Dev On Thu, 26 Dec 1996, Felipe Rivera Marquez wrote: > > > Hi there. > > Configuration: > > Freebsd 2.1.5, ultrastor ultra 14f irq 11 dma 5 id 7 (uha0), HD scsi > seagate st51080n 1gb id 0 (sd0), DAT unit HP surestoretape 6000 id 1 > (st0), root mounted on an ide hd Connner 540MB, pentium 100mhz, 32mb ram, > 128mb swap partition. > > All the scsi devices are detected without a problem. When a try > to archive any filesystem on the tape with tar i get this error after 10 > seconds more or less. > > uha0: unexpected ha_status 0x96 (target status 0x0) > st0(uha0:1:0): UNIT ATTENTION asc:29,0 > st0(uha0:1:0): Power on, reset, or bus device reset occurred > sd0(uha0:0:0): UNIT ATTENTION asc:29,0 > sd0(uha0:0:0): Power on, reset, or bus device reset occurred > , retries:4 > > and tar stops. > > Any ideas??? > > BTW does anybody have the jumper description for the ultrastor ultra 14f?? > > thanx > > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.970114111701.18601C-100000>