Date: Thu, 01 Nov 2001 11:24:32 -0500 From: "DAVE CUSHING" <DMCUSHING@cambrianc.on.ca> To: <freebsd-alpha@freebsd.org> Subject: AlphaServer 400 with external drives Message-ID: <01Nov1.111943est.119077@charon.cambrianc.on.ca>
next in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
I am having a problem with my AlphaServer 400 with an external drive array. I managed to install FreeBSD just fine from CD to the internal drives, then I added the external drives so I could have some space (2Gb just ain't what it used to be..)
Here is the result:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.4-RELEASE #0: Thu Sep 20 07:48:51 GMT 2001
jkh@jkh234.osd.bsdi.com:/usr/src/sys/compile/GENERIC
AlphaStation 200/400 ("Avanti")
AlphaServer 400 4/233, 233MHz
8192 byte page size, 1 processor.
CPU: EV45 (21064A) major=6 minor=0
OSF PAL rev: 0x100000002012e
real memory = 165724160 (161840K bytes)
Physical memory chunk(s):
0x007c0000 - 0x09ff5fff, 159604736 bytes (19483 pages)
avail memory = 154574848 (150952K bytes)
Preloaded elf kernel "kernel" at 0xfffffc00007a4000.
md0: Malloc disk
Creating DISK md0
found-> vendor=0x1000, dev=0x0001, revid=0x01
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[10]: type 1, range 32, base 00011000, size 8
map[14]: type 1, range 32, base 82140000, size 8
found-> vendor=0x8086, dev=0x0484, revid=0x03
class=00-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1011, dev=0x0004, revid=0x02
class=03-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 88000000, size 25
found-> vendor=0x1011, dev=0x0001, revid=0x02
class=06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=0 secondarybus=1
found-> vendor=0x1011, dev=0x0009, revid=0x12
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=14
map[10]: type 1, range 32, base 00011100, size 7
map[14]: type 1, range 32, base 82140100, size 7
pci0: <PCI bus> on pcib0
sym0: <810> port 0x11000-0x110ff mem 0x82140000-0x821400ff irq 11 at device 6.0 on pci0
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using NCR-generic firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00
sym0: Delay (GEN=11): 265 msec, 33540 KHz
sym0: Delay (GEN=11): 280 msec, 31744 KHz
sym0: Delay (GEN=11): 281 msec, 31631 KHz
sym0: interrupting at ISA irq 11
isab0: <Intel 82378ZB PCI to ISA bridge> at device 7.0 on pci0
Bus Modes: Bus Park, Resource Lock,
IDE controller: Secondary (170h-177h,376h,377h)
Floppy controller: 370h,371h
Floppy controller: 372h-377h
Keyboard controller: 60h,62h,64h,66h
RTC: 70h-77h
Configuration RAM: 0C00h,0800h-08FFh
Port 92: enabled
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x1011, dev=0x0004) at 11.0 irq 9
pcib1: <DEC 21050 PCI-PCI bridge> at device 12.0 on pci0
dec_2100_a50_intr_map: weird slot 0
found-> vendor=0x1077, dev=0x1020, revid=0x02
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[10]: type 1, range 32, base 00010000, size 8
map[14]: type 1, range 32, base 82010000, size 12
pci1: <PCI bus> on pcib1
Qlogic ISP Driver, FreeBSD Version 4.15, Core Version 2.2
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem 0x82010000-0x82010fff irq 9 at device 0.0 on pci1
isp0: using Memory space register mapping
isp0: interrupting at ISA irq 9
isp0: Board Revision 1020A, resident F/W Revision 5.57.1
isp0: Last F/W revision was 5.57.1
isp0: 256 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0
de0: <Digital 21140 Fast Ethernet> port 0x11100-0x1117f mem 0x82140100-0x8214017f irq 14 at device 13.0 on pci0
de0: interrupting at ISA irq 14
de0: DEC DE500-XA 21140 [10-100Mb/s] pass 1.2
de0: address 00:00:f8:02:ae:10
de0: enabling Full Duplex 100baseTX port
bpf: de0 attached
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xec000-0xeffff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
vga0: <Generic ISA VGA> failed to probe on isa0
sc0: no video adapter is found.
sc0: <System console> failed to probe on isa0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 233369052 Hz (firmware 233100233 Hz)
sio0: irq maps: 0x40 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: reserved for low-level i/o
sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: cannot reserve interrupt, failed.
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
isa_probe_children: probing PnP devices
Timecounter "alpha" frequency 233369052 Hz
bpf: ppp0 attached
bpf: sl0 attached
bpf: faith0 attached
bpf: lo0 attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
isp0: driver initiated bus reset of bus 0
(probe5:sym0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe5:sym0:0:5:0): ILLEGAL REQUEST asc:24,0
(probe5:sym0:0:5:0): Invalid field in CDB sks:c8,1
(probe6:sym0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe6:sym0:0:6:0): ILLEGAL REQUEST asc:24,0
(probe6:sym0:0:6:0): Invalid field in CDB
After letting it sit for about 20 minutes, it *will* boot and I can login - I go to to a sysinstall (to reconfigure drives etc) and I get the following when it is probing devices:
READY. CDB: 0 0 0 0 0 0 (sa0:sym0:0:6:0): NOT READY asc:3a,0
(sa0:sym0:0:6:0): Medium not present
(sa0:sym0:0:6:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0
(sa0:sym0:0:6:0): NOT READY asc:3a,0
(sa0:sym0:0:6:0): Medium not present
May 22 12:13:25 (freebsdalpha1 /ksernel: (sa0:sym0a:0:6:0): TEST UN0IT READY. CDB: 0: 0 0 0 0 0
sMay 22 12:13:25 yfreebsdalpha1 /kmernel: (sa0:sym00:0:6:0): TEST UN:IT READY. CDB: 00 0 0 0 0 0
:6:0): REWIND. CDB: 1 0 0 0 0 0
(sa0:sym0:0:6:0): NOT READY asc:3a,0
(sa0:sym0:0:6:0): Medium not present
(sa0:sym0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(sa0:sym0:0:6:0): NOT READY asc:3a,0
(sa0:sym0:0:6:0): Medium not present
May 22 12:13:25 freebsdalpha1 /k(ernel: (sa0:sym0s:0:6:0): NOT REAaDY asc:3a,0
0May 22 12:13:25 :freebsdalpha1 /ksernel: (sa0:sym0y:0:6:0): NOT REAmDY asc:3a,0
0:0:6:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0
(sa0:sym0:0:6:0): NOT READY asc:3a,0
(sa0:sym0:0:6:0): Medium not present
May 22 12:13:26 freebsdalpha1 /k(ernel: (sa0:sym0s:0:6:0): Medium anot present
0May 22 12:13:26 :freebsdalpha1 /ksernel: (sa0:sym0y:0:6:0): Medium mnot present
0:0:6:0): REWIND. CDB: 1 0 0 0 0 0
(sa0:sym0:0:6:0): NOT READY asc:3a,0
(sa0:sym0:0:6:0): Medium not present
May 22 12:13:26 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0
May 22 12:13:26 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY asc:3a,0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY asc:3a,0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not present
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not present
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): REWIND. CDB: 1 0 0 0 0 0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): REWIND. CDB: 1 0 0 0 0 0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY asc:3a,0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY asc:3a,0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not present
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not present
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY asc:3a,0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY asc:3a,0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not present
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not present
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY asc:3a,0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY asc:3a,0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not present
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not present
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): REWIND. CDB: 1 0 0 0 0 0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): REWIND. CDB: 1 0 0 0 0 0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY asc:3a,0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY asc:3a,0
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not present
May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not present
Any clues on how to solve this??
---
Dave Cushing
Network Administrator/Webmaster
Cambrian College
1400 Barrydowne Road, Sudbury, ON P3A 3V8
(705) 566-8101 x 7493
---
"Email is packaged by intellectual weight, not volume. Some settling of contents may have occurred during transmission."
[-- Attachment #2 --]
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 5.50.4807.2300" name=GENERATOR></HEAD>
<BODY
style="MARGIN-TOP: 2px; FONT: 10pt Microsoft Sans Serif; MARGIN-LEFT: 2px">
<DIV>I am having a problem with my AlphaServer 400 with an external drive
array. I managed to install FreeBSD just fine from CD to the internal
drives, then I added the external drives so I could have some space (2Gb just
ain't what it used to be..)</DIV>
<DIV> </DIV>
<DIV>Here is the result:</DIV>
<DIV> </DIV>
<DIV>Copyright (c) 1992-2001 The FreeBSD Project.<BR>Copyright (c) 1979, 1980,
1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994<BR> The Regents of the University
of California. All rights reserved.<BR>FreeBSD 4.4-RELEASE #0: Thu Sep 20
07:48:51 GMT 2001<BR> <A
href="mailto:jkh@jkh234.osd.bsdi.com:/usr/src/sys/compile/GENERIC">jkh@jkh234.osd.bsdi.com:/usr/src/sys/compile/GENERIC</A><BR>AlphaStation
200/400 ("Avanti")<BR>AlphaServer 400 4/233, 233MHz<BR>8192 byte page size, 1
processor.<BR>CPU: EV45 (21064A) major=6 minor=0<BR>OSF PAL rev:
0x100000002012e<BR>real memory = 165724160 (161840K bytes)<BR>Physical
memory chunk(s):<BR>0x007c0000 - 0x09ff5fff, 159604736 bytes (19483
pages)<BR>avail memory = 154574848 (150952K bytes)<BR>Preloaded elf kernel
"kernel" at 0xfffffc00007a4000.<BR>md0: Malloc disk<BR>Creating DISK
md0<BR>found-> vendor=0x1000, dev=0x0001,
revid=0x01<BR> class=00-00-00,
hdrtype=0x00, mfdev=0<BR>
subordinatebus=0
secondarybus=0<BR> intpin=a,
irq=11<BR> map[10]: type 1, range 32,
base 00011000, size 8<BR>
map[14]: type 1, range 32, base 82140000, size 8<BR>found->
vendor=0x8086, dev=0x0484,
revid=0x03<BR> class=00-00-00,
hdrtype=0x00, mfdev=0<BR>
subordinatebus=0
secondarybus=0<BR>found-> vendor=0x1011, dev=0x0004,
revid=0x02<BR> class=03-80-00,
hdrtype=0x00, mfdev=0<BR>
subordinatebus=0
secondarybus=0<BR> intpin=a,
irq=9<BR> map[10]: type 1, range 32,
base 88000000, size 25<BR>found-> vendor=0x1011, dev=0x0001,
revid=0x02<BR> class=06-04-00,
hdrtype=0x01, mfdev=0<BR>
subordinatebus=0
secondarybus=1<BR>found-> vendor=0x1011, dev=0x0009,
revid=0x12<BR> class=02-00-00,
hdrtype=0x00, mfdev=0<BR>
subordinatebus=0
secondarybus=0<BR> intpin=a,
irq=14<BR> map[10]: type 1, range 32,
base 00011100, size 7<BR>
map[14]: type 1, range 32, base 82140100, size 7<BR>pci0: <PCI bus>
on pcib0<BR>sym0: <810> port 0x11000-0x110ff mem 0x82140000-0x821400ff irq
11 at device 6.0 on pci0<BR>sym0: No NVRAM, ID 7, Fast-10, SE, parity
checking<BR>sym0: open drain IRQ line driver<BR>sym0: using NCR-generic
firmware.<BR>sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex)
00/00/00/00/00/00<BR>sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 =
(hex) 03/c8/00/00/08/00<BR>sym0: Delay (GEN=11): 265 msec, 33540 KHz<BR>sym0:
Delay (GEN=11): 280 msec, 31744 KHz<BR>sym0: Delay (GEN=11): 281 msec, 31631
KHz<BR>sym0: interrupting at ISA irq 11<BR>isab0: <Intel 82378ZB PCI to ISA
bridge> at device 7.0 on pci0<BR>
Bus Modes: Bus Park, Resource
Lock,<BR> IDE controller: Secondary
(170h-177h,376h,377h)<BR> Floppy
controller: 370h,371h <BR> Floppy
controller: 372h-377h <BR> Keyboard
controller: 60h,62h,64h,66h<BR> RTC:
70h-77h<BR> Configuration RAM:
0C00h,0800h-08FFh<BR> Port 92:
enabled<BR>isa0: <ISA bus> on isab0<BR>pci0: <unknown card>
(vendor=0x1011, dev=0x0004) at 11.0 irq 9<BR>pcib1: <DEC 21050 PCI-PCI
bridge> at device 12.0 on pci0<BR>dec_2100_a50_intr_map: weird slot
0<BR>found-> vendor=0x1077, dev=0x1020,
revid=0x02<BR> class=01-00-00,
hdrtype=0x00, mfdev=0<BR>
subordinatebus=0
secondarybus=0<BR> intpin=a,
irq=9<BR> map[10]: type 1, range 32,
base 00010000, size 8<BR>
map[14]: type 1, range 32, base 82010000, size 12<BR>pci1: <PCI bus> on
pcib1<BR>Qlogic ISP Driver, FreeBSD Version 4.15, Core Version 2.2<BR>isp0:
<Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x10000-0x100ff mem
0x82010000-0x82010fff irq 9 at device 0.0 on pci1<BR>isp0: using Memory space
register mapping<BR>isp0: interrupting at ISA irq 9<BR>isp0: Board Revision
1020A, resident F/W Revision 5.57.1<BR>isp0: Last F/W revision was
5.57.1<BR>isp0: 256 max I/O commands supported<BR>isp0: Initiator ID is 7 on
Channel 0<BR>de0: <Digital 21140 Fast Ethernet> port 0x11100-0x1117f mem
0x82140100-0x8214017f irq 14 at device 13.0 on pci0<BR>de0: interrupting at ISA
irq 14<BR>de0: DEC DE500-XA 21140 [10-100Mb/s] pass 1.2<BR>de0: address
00:00:f8:02:ae:10<BR>de0: enabling Full Duplex 100baseTX port<BR>bpf: de0
attached<BR>Trying Read_Port at 203<BR>Trying Read_Port at 243<BR>Trying
Read_Port at 283<BR>Trying Read_Port at 2c3<BR>Trying Read_Port at 303<BR>Trying
Read_Port at 343<BR>Trying Read_Port at 383<BR>Trying Read_Port at
3c3<BR>isa_probe_children: disabling PnP devices<BR>isa_probe_children: probing
non-PnP devices<BR>orm0: <Option ROM> at iomem 0xec000-0xeffff on
isa0<BR>fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on isa0<BR>fdc0: interrupting at ISA irq 6<BR>fdc0: FIFO enabled, 8 bytes
threshold<BR>fd0: <1440-KB 3.5" drive> on fdc0 drive 0<BR>atkbdc0:
<Keyboard controller (i8042)> at port 0x60,0x64 on isa0<BR>kbdc: DIAGNOSE
status:0055<BR>kbdc: TEST_KBD_PORT status:0000<BR>kbdc: DIAGNOSE
status:0055<BR>kbdc: TEST_KBD_PORT status:0000<BR>atkbd0: <AT Keyboard>
irq 1 on atkbdc0<BR>kbdc: DIAGNOSE status:0055<BR>kbdc: TEST_KBD_PORT
status:0000<BR>kbdc: DIAGNOSE status:0055<BR>kbdc: TEST_KBD_PORT
status:0000<BR>kbdc: DIAGNOSE status:0055<BR>kbdc: TEST_KBD_PORT
status:0000<BR>kbdc: DIAGNOSE status:0055<BR>kbdc: TEST_KBD_PORT
status:0000<BR>kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000<BR>atkbd0:
interrupting at ISA irq 1<BR>psm0: current command byte:0061<BR>kbdc:
TEST_AUX_PORT status:0000<BR>kbdc: RESET_AUX return code:00fe<BR>kbdc: RESET_AUX
return code:00fe<BR>kbdc: RESET_AUX return code:00fe<BR>kbdc: DIAGNOSE
status:0055<BR>kbdc: TEST_KBD_PORT status:0000<BR>psm0: failed to reset the aux
device.<BR>vga0: <Generic ISA VGA> failed to probe on isa0<BR>sc0: no
video adapter is found.<BR>sc0: <System console> failed to probe on
isa0<BR>mcclock0: <MC146818A real time clock> at port 0x70-0x71 on
isa0<BR>Calibrating clock(s) ... PCC clock: 233369052 Hz (firmware 233100233
Hz)<BR>sio0: irq maps: 0x40 0x51 0x41 0x41<BR>sio0 at port 0x3f8-0x3ff irq 4 on
isa0<BR>sio0: type 16550A, console<BR>sio0: interrupting at ISA irq 4<BR>sio1:
reserved for low-level i/o<BR>sio1 failed to probe at port 0x2f8-0x2ff irq 3
flags 0x50 on isa0<BR>ppc0: using extended I/O port range<BR>ppc0: SPP<BR>ppc0:
<Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0<BR>ppc0: Generic chipset
(NIBBLE-only) in COMPATIBLE mode<BR>plip0: cannot reserve interrupt,
failed.<BR>lpt0: <Printer> on ppbus0<BR>lpt0: Polled port<BR>ppi0:
<Parallel I/O> on ppbus0<BR>ppc0: interrupting at ISA irq
7<BR>isa_probe_children: probing PnP devices<BR>Timecounter "alpha"
frequency 233369052 Hz<BR>bpf: ppp0 attached<BR>bpf: sl0 attached<BR>bpf: faith0
attached<BR>bpf: lo0 attached<BR>Waiting 15 seconds for SCSI devices to
settle<BR>(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.<BR>isp0: driver
initiated bus reset of bus 0<BR>(probe5:sym0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff
0 <BR>(probe5:sym0:0:5:0): ILLEGAL REQUEST asc:24,0<BR>(probe5:sym0:0:5:0):
Invalid field in CDB sks:c8,1<BR>(probe6:sym0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff
0 <BR>(probe6:sym0:0:6:0): ILLEGAL REQUEST asc:24,0<BR>(probe6:sym0:0:6:0):
Invalid field in CDB</DIV>
<DIV> </DIV>
<DIV>After letting it sit for about 20 minutes, it *will* boot and I can login -
I go to to a sysinstall (to reconfigure drives etc) and I get the following when
it is probing devices:</DIV>
<DIV> </DIV>
<DIV> READY. CDB: 0 0 0 0 0 0 (sa0:sym0:0:6:0): NOT READY
asc:3a,0<BR>(sa0:sym0:0:6:0): Medium not present<BR>(sa0:sym0:0:6:0): LOAD
UNLOAD. CDB: 1b 0 0 0 1 0 <BR>(sa0:sym0:0:6:0): NOT READY
asc:3a,0<BR>(sa0:sym0:0:6:0): Medium not present<BR>May 22 12:13:25
(freebsdalpha1 /ksernel: (sa0:sym0a:0:6:0): TEST UN0IT READY. CDB: 0: 0 0 0 0 0
<BR>sMay 22 12:13:25 yfreebsdalpha1 /kmernel: (sa0:sym00:0:6:0): TEST UN:IT
READY. CDB: 00 0 0 0 0 0 <BR>:6:0): REWIND. CDB: 1 0 0 0 0 0
<BR>(sa0:sym0:0:6:0): NOT READY asc:3a,0<BR>(sa0:sym0:0:6:0): Medium not
present<BR>(sa0:sym0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
<BR>(sa0:sym0:0:6:0): NOT READY asc:3a,0<BR>(sa0:sym0:0:6:0): Medium not
present<BR>May 22 12:13:25 freebsdalpha1 /k(ernel: (sa0:sym0s:0:6:0): NOT REAaDY
asc:3a,0<BR>0May 22 12:13:25 :freebsdalpha1 /ksernel: (sa0:sym0y:0:6:0): NOT
REAmDY asc:3a,0<BR>0:0:6:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0
<BR>(sa0:sym0:0:6:0): NOT READY asc:3a,0<BR>(sa0:sym0:0:6:0): Medium not
present<BR>May 22 12:13:26 freebsdalpha1 /k(ernel: (sa0:sym0s:0:6:0): Medium
anot present<BR>0May 22 12:13:26 :freebsdalpha1 /ksernel: (sa0:sym0y:0:6:0):
Medium mnot present<BR>0:0:6:0): REWIND. CDB: 1 0 0 0 0 0 <BR>(sa0:sym0:0:6:0):
NOT READY asc:3a,0<BR>(sa0:sym0:0:6:0): Medium not present<BR>May 22 12:13:26
freebsdalpha1 /kernel: (sa0:sym0:0:6:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0 <BR>May
22 12:13:26 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): LOAD UNLOAD. CDB: 1b 0 0 0
1 0 <BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY
asc:3a,0<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY
asc:3a,0<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not
present<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not
present<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): REWIND. CDB:
1 0 0 0 0 0 <BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): REWIND.
CDB: 1 0 0 0 0 0 <BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0):
NOT READY asc:3a,0<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0):
NOT READY asc:3a,0<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0):
Medium not present<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0):
Medium not present<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0):
TEST UNIT READY. CDB: 0 0 0 0 0 0 <BR>May 22 12:13:27 freebsdalpha1 /kernel:
(sa0:sym0:0:6:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 <BR>May 22 12:13:27
freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY asc:3a,0<BR>May 22 12:13:27
freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY asc:3a,0<BR>May 22 12:13:27
freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not present<BR>May 22 12:13:27
freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not present<BR>May 22 12:13:27
freebsdalpha1 /kernel: (sa0:sym0:0:6:0): LOAD UNLOAD. CDB: 1b 0 0 0 1 0 <BR>May
22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): LOAD UNLOAD. CDB: 1b 0 0 0
1 0 <BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY
asc:3a,0<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): NOT READY
asc:3a,0<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not
present<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): Medium not
present<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): REWIND. CDB:
1 0 0 0 0 0 <BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0): REWIND.
CDB: 1 0 0 0 0 0 <BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0):
NOT READY asc:3a,0<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0):
NOT READY asc:3a,0<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0):
Medium not present<BR>May 22 12:13:27 freebsdalpha1 /kernel: (sa0:sym0:0:6:0):
Medium not present</DIV>
<DIV> </DIV>
<DIV>Any clues on how to solve this??</DIV>
<DIV> </DIV>
<DIV>---<BR>Dave Cushing<BR>Network Administrator/Webmaster<BR>Cambrian
College<BR>1400 Barrydowne Road, Sudbury, ON P3A 3V8<BR>(705) 566-8101 x
7493<BR>---</DIV>
<DIV> </DIV>
<DIV>"Email is packaged by intellectual weight, not volume. Some settling of
contents may have occurred during transmission."</DIV>
<DIV> </DIV>
<DIV> </DIV></BODY></HTML>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01Nov1.111943est.119077>