Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 27 Jan 2012 16:53:16 -0500
From:      Super Bisquit <superbisquit@gmail.com>
To:        Justin Hibbits <chmeeedalf@gmail.com>
Cc:        FreeBSD PowerPC ML <freebsd-ppc@freebsd.org>
Subject:   Re: Has source been updated with Hibbits' recent patches?
Message-ID:  <CA%2BWntOu7rsU4yy6HX9Tf_0cio7ZfPiVC0PSKhe24%2Bem2V27Jig@mail.gmail.com>
In-Reply-To: <CAHSQbTBhG=EKUqc4S9OknadrL_t3nZbro6gyL=o7joJ3y59MkA@mail.gmail.com>
References:  <CA%2BWntOuBdgcXow13BtfgVLfD3Bj0gT-WJ55X5HfUHoXxx7GD9Q@mail.gmail.com> <6B0E21DA-728B-43ED-8194-76D48A65B885@gmail.com> <CA%2BWntOt-MgYmuYjCgnbkUpyPmpWXgRM1UababbR8VabaYrP-Zw@mail.gmail.com> <CA%2BWntOvfJyXq2Ev%2BEAHS2GoiOX7qgpvfNb0uDW8WJ9TFvY9jNA@mail.gmail.com> <CAHSQbTC7amxv_4E8yj0LfTSXYGgdiyZ2hxv-hw3Fy3P_h5PNFA@mail.gmail.com> <CA%2BWntOvbyPUv58uC-Ycc6KjiBpo8_mzGz6inZdXi-SgsCq5mcA@mail.gmail.com> <CA%2BWntOsdQpTiAgFor4FVjYw4KjNVvyiatXPo8wg5bNs9%2BLZ6=g@mail.gmail.com> <B5EADFE9-4B4D-4338-B05A-A13560DA0226@gmail.com> <20120127061139.GA20497@FreeBSD.org> <CAHSQbTBhG=EKUqc4S9OknadrL_t3nZbro6gyL=o7joJ3y59MkA@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Here is some information that may help.
The linux firmware image is agere_sta_fw.bin.
Hardware identity is 0005:0001:0001:0002.
Station identity is 001f:0001:0008:0046.
Firmware is determined as Lucent/Agere 8.70.
 I'll try the patch and tell you how it works.



On 1/27/12, Justin Hibbits <chmeeedalf@gmail.com> wrote:
> 2012/1/27 Alexey Dokuchaev <danfe@freebsd.org>
>
>> On Thu, Jan 26, 2012 at 09:10:40PM -0500, Justin Hibbits wrote:
>> > Oh, I forgot, you need to manually build the if_wi module (go into /
>> > usr/src/sys/modules/wi and make), because it's not included in the
>> > modules Makefile for powerpc.
>>
>> If it works fine, why is it not enabled by default on ppc?
>>
>> ./danfe
>>
>
> I don't know if it works fine :)  Plus, I forgot to enable it in my patch.
>  Here's another patch that does enable it.
>
> Super, you can try the attached patch.
>
> - Justin
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BWntOu7rsU4yy6HX9Tf_0cio7ZfPiVC0PSKhe24%2Bem2V27Jig>