Date: Tue, 11 Dec 2012 06:34:11 -0500 From: Mike Tancsa <mike@sentex.net> To: Hans Petter Selasky <hselasky@c2i.net> Cc: freebsd-usb@freebsd.org Subject: Re: USB3 SATA enclosure Message-ID: <50C71A33.6030109@sentex.net> In-Reply-To: <201212110818.28963.hselasky@c2i.net> References: <50C65439.8010408@sentex.net> <20121211072707.743bb3c5@X220.ovitrap.com> <201212110818.28963.hselasky@c2i.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On 12/11/2012 2:18 AM, Hans Petter Selasky wrote: >> As I use it only randomly, I have had to notice that it is not >> recognised as USB3 on 10. either anymore. >> >> Something got changed which stopped it from working. > > We've only changed some reset timings. See: > > sysctl -a hw.usb > hw.usb.uaudio.default_channels: 0 hw.usb.uaudio.default_bits: 32 hw.usb.uaudio.default_rate: 0 hw.usb.uaudio.debug: 0 hw.usb.ehci.lostintrbug: 0 hw.usb.ehci.iaadbug: 0 hw.usb.ehci.no_hs: 0 hw.usb.ehci.debug: 0 hw.usb.ohci.debug: 0 hw.usb.uhci.loop: 0 hw.usb.uhci.debug: 0 hw.usb.xhci.xhci_port_route: 0 hw.usb.xhci.debug: 0 hw.usb.no_shutdown_wait: 0 hw.usb.no_suspend_wait: 0 hw.usb.no_boot_wait: 0 hw.usb.ctrl.debug: 0 hw.usb.umass.debug: 0 hw.usb.urio.debug: 0 hw.usb.timings.extra_power_up_time: 20 hw.usb.timings.resume_recovery: 50 hw.usb.timings.resume_wait: 50 hw.usb.timings.resume_delay: 250 hw.usb.timings.set_address_settle: 10 hw.usb.timings.port_resume_delay: 40 hw.usb.timings.port_powerup_delay: 300 hw.usb.timings.port_reset_recovery: 250 hw.usb.timings.port_root_reset_delay: 250 hw.usb.timings.port_reset_delay: 50 hw.usb.debug: 0 hw.usb.dev.debug: 0 hw.usb.usb_lang_mask: 255 hw.usb.usb_lang_id: 9 hw.usb.template: 0 hw.usb.ugen.debug: 0 hw.usb.power_timeout: 30 hw.usb.uhub.debug: 0 hw.usb.no_pf: 0 hw.usb.proc.debug: 0 hw.usb.no_cs_fail: 0 hw.usb.aue.debug: 0 hw.usb.axe.debug: 0 hw.usb.cdce.interval: 0 hw.usb.cdce.debug: 0 hw.usb.cue.debug: 0 hw.usb.kue.debug: 0 hw.usb.rue.debug: 0 hw.usb.udav.debug: 0 hw.usb.rum.debug: 0 hw.usb.run.debug: 0 hw.usb.uath.regdomain: 0 hw.usb.uath.countrycode: 0 hw.usb.ural.debug: 0 hw.usb.urtw.preamble_mode: 2 hw.usb.zyd.debug: 0 hw.usb.u3g.debug: 0 hw.usb.ubsa.debug: 0 hw.usb.uftdi.debug: 0 hw.usb.ulpt.debug: 0 hw.usb.uplcom.debug: 0 hw.usb.uslcom.debug: 0 hw.usb.uvisor.debug: 0 hw.usb.uvscom.debug: 0 hw.usb.ucom.cons_baud: 9600 hw.usb.ucom.cons_subunit: 0 hw.usb.ucom.cons_unit: -1 hw.usb.ucom.debug: 0 hw.usb.uhid.debug: 0 hw.usb.ukbd.no_leds: 0 hw.usb.ukbd.debug: 0 hw.usb.ums.debug: 0 -- ------------------- Mike Tancsa, tel +1 519 651 3400 Sentex Communications, mike@sentex.net Providing Internet services since 1994 www.sentex.net Cambridge, Ontario Canada http://www.tancsa.com/
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50C71A33.6030109>